mbox series

[v2,0/2] Enable SS/HS USB support on SM8150

Message ID 1584478412-7798-1-git-send-email-wcheng@codeaurora.org
Headers show
Series Enable SS/HS USB support on SM8150 | expand

Message

Wesley Cheng March 17, 2020, 8:53 p.m. UTC 
Add required device tree nodes to enable the USB SS and HS
paths on the primary USB controller on SM8150.  In addition,
implement missing resources from the SM8150 GCC driver, which
includes the USB GDSC and the USB PIPE clocks.

Changes in v2:
 - Combine GDSC and USB PIPE clock changes.
 - Re-order DTS nodes based on address

Jack Pham (1):
  arm64: dts: qcom: sm8150: Add USB and PHY device nodes

Wesley Cheng (1):
  clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150

 arch/arm64/boot/dts/qcom/sm8150-mtp.dts     | 17 ++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi        | 92 +++++++++++++++++++++++++++++
 drivers/clk/qcom/gcc-sm8150.c               | 52 ++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8150.h |  4 ++
 4 files changed, 165 insertions(+)