diff mbox series

[v2,2/6] hwrng: imx-rngc - reasonable timeout for initial seed

Message ID 20230824192059.1569591-3-martin@kaiser.cx
State Superseded
Headers show
Series hwrng: imx-rngc - use polling instead of interrupt | expand

Commit Message

Martin Kaiser Aug. 24, 2023, 7:20 p.m. UTC
Set a more reasonable timeout for calculating the initial seed.

The reference manuals says that "The initial seed takes approximately
2,000,000 clock cycles." If the rngc peripheral clock runs at 66.5MHz,
this is approx. 30ms.

A timeout of 100ms is more appropriate that the current value of 3
seconds. We define the timeout in us to simplify the transition to
readl_poll_timeout.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
v2:
- adjust timeouts before we switch to polling

 drivers/char/hw_random/imx-rngc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/char/hw_random/imx-rngc.c b/drivers/char/hw_random/imx-rngc.c
index 6024c923b67d..8ff3d46674fd 100644
--- a/drivers/char/hw_random/imx-rngc.c
+++ b/drivers/char/hw_random/imx-rngc.c
@@ -51,9 +51,8 @@ 
 
 #define RNGC_ERROR_STATUS_STAT_ERR	0x00000008
 
-#define RNGC_TIMEOUT  3000 /* 3 sec */
-
-#define RNGC_SELFTEST_TIMEOUT 1500 /* us */
+#define RNGC_SELFTEST_TIMEOUT   1500 /* us */
+#define RNGC_SEED_TIMEOUT     100000 /* us */
 
 static bool self_test = true;
 module_param(self_test, bool, 0);
@@ -184,7 +183,8 @@  static int imx_rngc_init(struct hwrng *rng)
 		cmd = readl(rngc->base + RNGC_COMMAND);
 		writel(cmd | RNGC_CMD_SEED, rngc->base + RNGC_COMMAND);
 
-		ret = wait_for_completion_timeout(&rngc->rng_op_done, msecs_to_jiffies(RNGC_TIMEOUT));
+		ret = wait_for_completion_timeout(&rngc->rng_op_done,
+						  usecs_to_jiffies(RNGC_SEED_TIMEOUT));
 		if (!ret) {
 			ret = -ETIMEDOUT;
 			goto err;