@@ -244,7 +244,7 @@ static int omap_aes_gcm_handle_queue(struct omap_aes_dev *dd,
err = omap_aes_write_ctrl(dd);
if (!err) {
- if (dd->in_sg_len && dd->out_sg_len)
+ if (dd->in_sg_len)
err = omap_aes_crypt_dma_start(dd);
else
omap_aes_gcm_dma_out_callback(dd);
@@ -269,13 +269,14 @@ static int omap_aes_crypt_dma(struct omap_aes_dev *dd,
struct scatterlist *out_sg,
int in_sg_len, int out_sg_len)
{
- struct dma_async_tx_descriptor *tx_in, *tx_out;
+ struct dma_async_tx_descriptor *tx_in, *tx_out = NULL, *cb_desc;
struct dma_slave_config cfg;
int ret;
if (dd->pio_only) {
scatterwalk_start(&dd->in_walk, dd->in_sg);
- scatterwalk_start(&dd->out_walk, dd->out_sg);
+ if (out_sg_len)
+ scatterwalk_start(&dd->out_walk, dd->out_sg);
/* Enable DATAIN interrupt and let it take
care of the rest */
@@ -312,34 +313,45 @@ static int omap_aes_crypt_dma(struct omap_aes_dev *dd,
/* No callback necessary */
tx_in->callback_param = dd;
+ tx_in->callback = NULL;
/* OUT */
- ret = dmaengine_slave_config(dd->dma_lch_out, &cfg);
- if (ret) {
- dev_err(dd->dev, "can't configure OUT dmaengine slave: %d\n",
- ret);
- return ret;
- }
+ if (out_sg_len) {
+ ret = dmaengine_slave_config(dd->dma_lch_out, &cfg);
+ if (ret) {
+ dev_err(dd->dev, "can't configure OUT dmaengine slave: %d\n",
+ ret);
+ return ret;
+ }
- tx_out = dmaengine_prep_slave_sg(dd->dma_lch_out, out_sg, out_sg_len,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!tx_out) {
- dev_err(dd->dev, "OUT prep_slave_sg() failed\n");
- return -EINVAL;
+ tx_out = dmaengine_prep_slave_sg(dd->dma_lch_out, out_sg,
+ out_sg_len,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx_out) {
+ dev_err(dd->dev, "OUT prep_slave_sg() failed\n");
+ return -EINVAL;
+ }
+
+ cb_desc = tx_out;
+ } else {
+ cb_desc = tx_in;
}
if (dd->flags & FLAGS_GCM)
- tx_out->callback = omap_aes_gcm_dma_out_callback;
+ cb_desc->callback = omap_aes_gcm_dma_out_callback;
else
- tx_out->callback = omap_aes_dma_out_callback;
- tx_out->callback_param = dd;
+ cb_desc->callback = omap_aes_dma_out_callback;
+ cb_desc->callback_param = dd;
+
dmaengine_submit(tx_in);
- dmaengine_submit(tx_out);
+ if (tx_out)
+ dmaengine_submit(tx_out);
dma_async_issue_pending(dd->dma_lch_in);
- dma_async_issue_pending(dd->dma_lch_out);
+ if (out_sg_len)
+ dma_async_issue_pending(dd->dma_lch_out);
/* start DMA */
dd->pdata->trigger(dd, dd->total);
@@ -361,11 +373,13 @@ int omap_aes_crypt_dma_start(struct omap_aes_dev *dd)
return -EINVAL;
}
- err = dma_map_sg(dd->dev, dd->out_sg, dd->out_sg_len,
- DMA_FROM_DEVICE);
- if (!err) {
- dev_err(dd->dev, "dma_map_sg() error\n");
- return -EINVAL;
+ if (dd->out_sg_len) {
+ err = dma_map_sg(dd->dev, dd->out_sg, dd->out_sg_len,
+ DMA_FROM_DEVICE);
+ if (!err) {
+ dev_err(dd->dev, "dma_map_sg() error\n");
+ return -EINVAL;
+ }
}
}
@@ -373,8 +387,9 @@ int omap_aes_crypt_dma_start(struct omap_aes_dev *dd)
dd->out_sg_len);
if (err && !dd->pio_only) {
dma_unmap_sg(dd->dev, dd->in_sg, dd->in_sg_len, DMA_TO_DEVICE);
- dma_unmap_sg(dd->dev, dd->out_sg, dd->out_sg_len,
- DMA_FROM_DEVICE);
+ if (dd->out_sg_len)
+ dma_unmap_sg(dd->dev, dd->out_sg, dd->out_sg_len,
+ DMA_FROM_DEVICE);
}
return err;
If we only have assocdata with an omap-aes-gcm, it currently just completes it directly without passing it over to the crypto HW. This produces wrong results. Fix by passing the request down to the crypto HW, and fix the DMA support code to accept a case where we don't expect any output data. In the case where only assocdata is provided, it just passes through the accelerator and provides authentication results, without any encrypted/decrypted buffer via DMA. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- drivers/crypto/omap-aes-gcm.c | 2 +- drivers/crypto/omap-aes.c | 67 +++++++++++++++++++++-------------- 2 files changed, 42 insertions(+), 27 deletions(-) -- 2.17.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki