@@ -65,6 +65,7 @@ struct nx_coproc {
* Using same values as in skiboot or coprocessor type representing
* in NX workbook.
*/
+#define NX_CT_GZIP (2) /* on P9 and later */
#define NX_CT_842 (3)
static int (*nx842_powernv_exec)(const unsigned char *in,
@@ -819,6 +820,9 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
if (type == NX_CT_842)
ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_842_HIPRI,
VAS_COP_TYPE_842);
+ else if (type == NX_CT_GZIP)
+ ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_GZIP_HIPRI,
+ VAS_COP_TYPE_GZIP);
if (ret)
goto err_out;
@@ -867,12 +871,16 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
return ret;
}
-static int __init nx_coproc_init(int chip_id, int ct_842)
+static int __init nx_coproc_init(int chip_id, int ct_842, int ct_gzip)
{
int ret = 0;
if (opal_check_token(OPAL_NX_COPROC_INIT)) {
ret = opal_nx_coproc_init(chip_id, ct_842);
+
+ if (!ret)
+ ret = opal_nx_coproc_init(chip_id, ct_gzip);
+
if (ret) {
ret = opal_error_code(ret);
pr_err("Failed to initialize NX for chip(%d): %d\n",
@@ -902,8 +910,8 @@ static int __init find_nx_device_tree(struct device_node *dn, int chip_id,
static int __init nx_powernv_probe_vas(struct device_node *pn)
{
int chip_id, vasid, ret = 0;
+ int ct_842 = 0, ct_gzip = 0;
struct device_node *dn;
- int ct_842 = 0;
chip_id = of_get_ibm_chip_id(pn);
if (chip_id < 0) {
@@ -920,19 +928,24 @@ static int __init nx_powernv_probe_vas(struct device_node *pn)
for_each_child_of_node(pn, dn) {
ret = find_nx_device_tree(dn, chip_id, vasid, NX_CT_842,
"ibm,p9-nx-842", &ct_842);
+
+ if (!ret)
+ ret = find_nx_device_tree(dn, chip_id, vasid,
+ NX_CT_GZIP, "ibm,p9-nx-gzip", &ct_gzip);
+
if (ret)
return ret;
}
- if (!ct_842) {
- pr_err("NX842 FIFO nodes are missing\n");
+ if (!ct_842 || !ct_gzip) {
+ pr_err("NX FIFO nodes are missing\n");
return -EINVAL;
}
/*
* Initialize NX instance for both high and normal priority FIFOs.
*/
- ret = nx_coproc_init(chip_id, ct_842);
+ ret = nx_coproc_init(chip_id, ct_842, ct_gzip);
return ret;
}
@@ -1072,10 +1085,19 @@ static __init int nx_compress_powernv_init(void)
nx842_powernv_exec = nx842_exec_icswx;
} else {
/*
+ * Register VAS user space API for NX GZIP so
+ * that user space can use GZIP engine.
+ * 842 compression is supported only in kernel.
+ */
+ ret = vas_register_coproc_api(THIS_MODULE);
+
+ /*
* GZIP is not supported in kernel right now.
* So open tx windows only for 842.
*/
- ret = nx_open_percpu_txwins();
+ if (!ret)
+ ret = nx_open_percpu_txwins();
+
if (ret) {
nx_delete_coprocs();
return ret;
@@ -1096,6 +1118,15 @@ static __init int nx_compress_powernv_init(void)
static void __exit nx_compress_powernv_exit(void)
{
+ /*
+ * GZIP engine is supported only in power9 or later and nx842_ct
+ * is used on power8 (icswx).
+ * VAS API for NX GZIP is registered during init for user space
+ * use. So delete this API use for GZIP engine.
+ */
+ if (!nx842_ct)
+ vas_unregister_coproc_api();
+
crypto_unregister_alg(&nx842_powernv_alg);
nx_delete_coprocs();
Changes to probe GZIP device-tree nodes, open RX windows and setup GZIP compression type. No plans to provide GZIP usage in kernel right now, but this patch enables GZIP for user space usage. Signed-off-by: Haren Myneni <haren@linux.ibm.com> --- drivers/crypto/nx/nx-common-powernv.c | 43 ++++++++++++++++++++++++++++++----- 1 file changed, 37 insertions(+), 6 deletions(-)