[BlueZ,v3,2/2] doc: Add initial RFCOMM(7) documentation

diff --git a/Makefile.am b/Makefile.am
index 8aedbb20d0d8..8f5d2fb553b4 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -348,7 +348,7 @@  CLEANFILES += $(builtin_files)
 
 if MANPAGES
 man_MANS += src/bluetoothd.8
-man_MANS += doc/l2cap.7
+man_MANS += doc/l2cap.7 doc/rfcomm.7
 man_MANS += doc/org.bluez.Adapter.5 doc/org.bluez.Device.5 \
 		doc/org.bluez.DeviceSet.5 doc/org.bluez.AgentManager.5 \
 		doc/org.bluez.Agent.5 doc/org.bluez.ProfileManager.5 \
@@ -381,7 +381,7 @@  man_MANS += doc/org.bluez.obex.Client.5 doc/org.bluez.obex.Session.5 \
 		doc/org.bluez.obex.AgentManager.5 doc/org.bluez.obex.Agent.5
 endif
 manual_pages += src/bluetoothd.8
-manual_pages += doc/l2cap.7
+manual_pages += doc/l2cap.7 doc/rfcomm.7
 manual_pages += doc/org.bluez.Adapter.5 doc/org.bluez.Device.5 \
 		doc/org.bluez.DeviceSet.5 doc/org.bluez.AgentManager.5 \
 		doc/org.bluez.Agent.5 doc/org.bluez.ProfileManager.5 \
diff --git a/doc/rfcomm.rst b/doc/rfcomm.rst
new file mode 100644
index 000000000000..4e43094b797d
--- /dev/null
+++ b/doc/rfcomm.rst
@@ -0,0 +1,225 @@ 
+======
+rfcomm
+======
+
+---------------
+RFCOMM protocol
+---------------
+
+:Version: BlueZ
+:Copyright: Free use of this software is granted under ther terms of the GNU
+            Lesser General Public Licenses (LGPL).
+:Date: May 2024
+:Manual section: 7
+:Manual group: Linux System Administration
+
+SYNOPSIS
+========
+
+.. code-block:: c
+
+    #include <sys/socket.h>
+    #include <bluetooth/bluetooth.h>
+    #include <bluetooth/rfcomm.h>
+
+    rfcomm_socket = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
+
+DESCRIPTION
+===========
+
+The RFCOMM protocol provides emulation of serial ports over the L2CAP(7)
+protocol. The protocol is based on the ETSI standard TS 07.10.
+
+RFCOMM is a simple transport protocol, with additional provisions for emulating
+the 9 circuits of RS-232 (EIATIA-232-E) serial ports.
+
+SOCKET ADDRESS
+==============
+
+.. code-block:: c
+
+    struct sockaddr_rc {
+        sa_family_t rc_family;
+        unsigned short rc_bdaddr;
+        unsigned char rc_channel;
+    };
+
+Example:
+
+.. code-block:: c
+
+    struct sockaddr_rc addr;
+
+    memset(&addr, 0, sizeof(addr));
+    addr.rc_family = AF_BLUETOOTH;
+    bacpy(&addr.rc_bdaddr, bdaddr);
+    addr.rc_channel = channel;
+
+SOCKET OPTIONS
+==============
+
+The socket options listed below can be set by using **setsockopt(2)** and read
+with **getsockopt(2)** with the socket level set to SOL_BLUETOOTH.
+
+BT_SECURITY (since Linux 2.6.30)
+--------------------------------
+
+Channel security level, possible values:
+
+.. csv-table::
+    :header: "Value", "Security Level", "Link Key Type", "Encryption"
+    :widths: auto
+
+    **BT_SECURITY_SDP**, 0 (SDP Only), None, Not required
+    **BT_SECURITY_LOW**, 1 (Low), Unauthenticated, Not required
+    **BT_SECURITY_MEDIUM**, 2 (Medium - default), Unauthenticated, Desired
+    **BT_SECURITY_HIGH**, 3 (High), Authenticated, Required
+    **BT_SECURITY_FIPS** (since Linux 3.15), 4 (Secure Only), Authenticated (P-256 based Secure Simple Pairing and Secure Authentication), Required
+
+Example:
+
+.. code-block:: c
+
+    int level = BT_SECURITY_HIGH;
+    int err = setsockopt(rfcomm_socket, SOL_BLUETOOTH, BT_SECURITY, &level,
+                         sizeof(level));
+    if (err == -1) {
+        perror("setsockopt");
+        return 1;
+    }
+
+BT_DEFER_SETUP (since Linux 2.6.30)
+-----------------------------------
+
+Channel defer connection setup, this control if the connection procedure
+needs to be authorized by userspace before responding which allows
+authorization at profile level, possible values:
+
+.. csv-table::
+    :header: "Value", "Description", "Authorization"
+    :widths: auto
+
+    **0**, Disable (default), Not required
+    **1**, Enable, Required
+
+Example:
+
+.. code-block:: c
+
+    int defer_setup = 1;
+    int err = setsockopt(rfcomm_socket, SOL_BLUETOOTH, BT_DEFER_SETUP,
+                         &defer_setup, sizeof(defer_setup));
+    if (err == -1) {
+        perror("setsockopt");
+        return err;
+    }
+
+    err = listen(rfcomm_socket, 5);
+    if (err) {
+        perror("listen");
+        return err;
+    }
+
+    struct sockaddr_rc remote_addr = {0};
+    socklen_t addr_len = sizeof(remote_addr);
+    int new_socket = accept(rfcomm_socket, (struct sockaddr*)&remote_addr,
+                            &addr_len);
+    if (new_socket < 0) {
+        perror("accept");
+        return new_socket;
+    }
+
+    /* To complete the connection setup of new_socket read 1 byte */
+    char c;
+    struct pollfd pfd;
+
+    memset(&pfd, 0, sizeof(pfd));
+    pfd.fd = new_socket;
+    pfd.events = POLLOUT;
+
+    err = poll(&pfd, 1, 0);
+    if (err) {
+        perror("poll");
+        return err;
+    }
+
+    if (!(pfd.revents & POLLOUT)) {
+        err = read(sk, &c, 1);
+        if (err < 0) {
+            perror("read");
+            return err;
+        }
+    }
+
+BT_FLUSHABLE (since Linux 2.6.39)
+---------------------------------
+
+Channel flushable flag, this control if the channel data can be flushed or
+not, possible values:
+
+.. csv-table::
+    :header: "Define", "Value", "Description"
+    :widths: auto
+
+    **BT_FLUSHABLE_OFF**, 0x00 (default), Do not flush data
+    **BT_FLUSHABLE_ON**, 0x01, Flush data
+
+BT_POWER (since Linux 3.1)
+--------------------------
+
+Channel power policy, this control if the channel shall force exit of sniff
+mode or not, possible values:
+
+.. csv-table::
+    :header: "Define", "Value", "Description"
+    :widths: auto
+
+    **BT_POWER_FORCE_ACTIVE_OFF**, 0x00 (default), Don't force exit of sniff mode
+    **BT_POWER_FORCE_ACTIVE_ON**, 0x01, Force exit of sniff mode
+
+BT_CHANNEL_POLICY (since Linux 3.10)
+------------------------------------
+
+High-speed (AMP) channel policy, possible values:
+
+.. csv-table::
+    :header: "Define", "Value", "Description"
+    :widths: auto
+
+    **BT_CHANNEL_POLICY_BREDR_ONLY**, 0 (default), BR/EDR only
+    **BT_CHANNEL_POLICY_BREDR_PREFERRED**, 1, BR/EDR Preferred
+    **BT_CHANNEL_POLICY_BREDR_PREFERRED**, 2, AMP Preferred
+
+BT_PHY (since Linux 5.10)
+-------------------------
+
+Channel supported PHY(s), possible values:
+
+.. csv-table::
+    :header: "Define", "Value", "Description"
+    :widths: auto
+
+    **BT_PHY_BR_1M_1SLOT**, BIT 0, BR 1Mbps 1SLOT
+    **BT_PHY_BR_1M_3SLOT**, BIT 1, BR 1Mbps 3SLOT
+    **BT_PHY_BR_1M_5SLOT**, BIT 2, BR 1Mbps 5SLOT
+    **BT_PHY_BR_2M_1SLOT**, BIT 3, EDR 2Mbps 1SLOT
+    **BT_PHY_BR_2M_3SLOT**, BIT 4, EDR 2Mbps 3SLOT
+    **BT_PHY_BR_2M_5SLOT**, BIT 5, EDR 2Mbps 5SLOT
+    **BT_PHY_BR_3M_1SLOT**, BIT 6, EDR 3Mbps 1SLOT
+    **BT_PHY_BR_3M_3SLOT**, BIT 7, EDR 3Mbps 3SLOT
+    **BT_PHY_BR_3M_5SLOT**, BIT 8, EDR 3Mbps 5SLOT
+
+RESOURCES
+=========
+
+http://www.bluez.org
+
+REPORTING BUGS
+==============
+
+linux-bluetooth@vger.kernel.org
+
+SEE ALSO
+========
+
+socket(7), rctest(1)