[BlueZ,1/6] tools/mesh-gatt: Add onoff set unack message to onoff client model

This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=591917 ---Test result--- Test Summary: CheckPatch FAIL 10.19 seconds GitLint FAIL 6.00 seconds Prep - Setup ELL PASS 50.55 seconds Build - Prep PASS 0.55 seconds Build - Configure PASS 9.60 seconds Build - Make PASS 216.26 seconds Make Check PASS 9.63 seconds Make Distcheck PASS 254.73 seconds Build w/ext ELL - Configure PASS 9.70 seconds Build w/ext ELL - Make PASS 202.49 seconds Details ############################## Test: CheckPatch - FAIL Desc: Run checkpatch.pl script with rule in .checkpatch.conf Output: [BlueZ,1/6] tools/mesh-gatt: Add onoff set unack message to onoff client model WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (8, 8) #108: FILE: tools/mesh-gatt/onoff-model.c:243: + if ((np != 1) && (np != 2) && [...] + bt_shell_printf("Bad arguments: Expecting \"0\" or \"1\" " ERROR:SPACING: spaces required around that '==' (ctx:VxV) #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ ^ ERROR:SPACING: space required before the open brace '{' #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ ERROR:SPACING: space prohibited after that open parenthesis '(' #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ ERROR:SPACING: space prohibited before that close parenthesis ')' #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ ERROR:SPACING: space required before the open parenthesis '(' #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ WARNING:BRACES: braces {} are not necessary for any arm of this statement #116: FILE: tools/mesh-gatt/onoff-model.c:251: + if( (np==2) && parms[1] ){ [...] + }else{ [...] ERROR:SPACING: space required before the open brace '{' #118: FILE: tools/mesh-gatt/onoff-model.c:253: + }else{ ERROR:SPACING: space required after that close brace '}' #118: FILE: tools/mesh-gatt/onoff-model.c:253: + }else{ /github/workspace/src/12662883.patch total: 7 errors, 2 warnings, 43 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/12662883.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [BlueZ,2/6] tools/mesh-gatt: Fix status messages processing ERROR:SPACING: space required after that ',' (ctx:VxV) #112: FILE: tools/mesh-gatt/node.c:494: + print_byte_array("\t",data, len); ^ WARNING:LONG_LINE_STRING: line length of 81 exceeds 80 columns #142: FILE: tools/mesh-gatt/onoff-model.c:115: + bt_shell_printf("On Off Model Message received (%d) opcode %x\n", ERROR:SPACING: space required after that ',' (ctx:VxV) #144: FILE: tools/mesh-gatt/onoff-model.c:117: + print_byte_array("\t",data, len); ^ ERROR:SPACING: space required after that close brace '}' #162: FILE: tools/mesh-gatt/onoff-model.c:128: + }else /github/workspace/src/12662885.patch total: 3 errors, 1 warnings, 68 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/12662885.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [BlueZ,3/6] tools/mesh-gatt: Fix unwanted return in onoff client model ERROR:SPACING: space required before the open brace '{' #99: FILE: tools/mesh-gatt/onoff-model.c:212: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #99: FILE: tools/mesh-gatt/onoff-model.c:212: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #100: FILE: tools/mesh-gatt/onoff-model.c:213: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:SPACING: space required after that ',' (ctx:VxV) #100: FILE: tools/mesh-gatt/onoff-model.c:213: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ ERROR:SPACING: space required before the open brace '{' #111: FILE: tools/mesh-gatt/onoff-model.c:241: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #111: FILE: tools/mesh-gatt/onoff-model.c:241: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #112: FILE: tools/mesh-gatt/onoff-model.c:242: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:SPACING: space required after that ',' (ctx:VxV) #112: FILE: tools/mesh-gatt/onoff-model.c:242: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ /github/workspace/src/12662887.patch total: 4 errors, 4 warnings, 22 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/12662887.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [BlueZ,4/6] tools/mesh-gatt: Add subscription delete message to config client model ERROR:CODE_INDENT: code indent should use tabs where possible #96: FILE: tools/mesh-gatt/config-client.c:1042: + uint16_t n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #96: FILE: tools/mesh-gatt/config-client.c:1042: + uint16_t n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #97: FILE: tools/mesh-gatt/config-client.c:1043: + uint8_t msg[32];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #97: FILE: tools/mesh-gatt/config-client.c:1043: + uint8_t msg[32];$ ERROR:CODE_INDENT: code indent should use tabs where possible #98: FILE: tools/mesh-gatt/config-client.c:1044: + int parm_cnt;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #98: FILE: tools/mesh-gatt/config-client.c:1044: + int parm_cnt;$ ERROR:CODE_INDENT: code indent should use tabs where possible #100: FILE: tools/mesh-gatt/config-client.c:1046: + if (IS_UNASSIGNED(target)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #100: FILE: tools/mesh-gatt/config-client.c:1046: + if (IS_UNASSIGNED(target)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #101: FILE: tools/mesh-gatt/config-client.c:1047: + bt_shell_printf("Destination not set\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #101: FILE: tools/mesh-gatt/config-client.c:1047: + bt_shell_printf("Destination not set\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #102: FILE: tools/mesh-gatt/config-client.c:1048: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #102: FILE: tools/mesh-gatt/config-client.c:1048: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #103: FILE: tools/mesh-gatt/config-client.c:1049: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #103: FILE: tools/mesh-gatt/config-client.c:1049: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #105: FILE: tools/mesh-gatt/config-client.c:1051: + n = mesh_opcode_set(OP_CONFIG_MODEL_SUB_DELETE, msg);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #105: FILE: tools/mesh-gatt/config-client.c:1051: + n = mesh_opcode_set(OP_CONFIG_MODEL_SUB_DELETE, msg);$ ERROR:CODE_INDENT: code indent should use tabs where possible #107: FILE: tools/mesh-gatt/config-client.c:1053: + parm_cnt = read_input_parameters(argc, argv);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #107: FILE: tools/mesh-gatt/config-client.c:1053: + parm_cnt = read_input_parameters(argc, argv);$ ERROR:CODE_INDENT: code indent should use tabs where possible #108: FILE: tools/mesh-gatt/config-client.c:1054: + if (parm_cnt != 3) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #108: FILE: tools/mesh-gatt/config-client.c:1054: + if (parm_cnt != 3) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #109: FILE: tools/mesh-gatt/config-client.c:1055: + bt_shell_printf("Bad arguments: %s\n", argv[1]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #109: FILE: tools/mesh-gatt/config-client.c:1055: + bt_shell_printf("Bad arguments: %s\n", argv[1]);$ ERROR:CODE_INDENT: code indent should use tabs where possible #110: FILE: tools/mesh-gatt/config-client.c:1056: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #110: FILE: tools/mesh-gatt/config-client.c:1056: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #111: FILE: tools/mesh-gatt/config-client.c:1057: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #111: FILE: tools/mesh-gatt/config-client.c:1057: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #113: FILE: tools/mesh-gatt/config-client.c:1059: + /* Per Mesh Profile 4.3.2.19 */$ ERROR:CODE_INDENT: code indent should use tabs where possible #114: FILE: tools/mesh-gatt/config-client.c:1060: + /* Element Address */$ ERROR:CODE_INDENT: code indent should use tabs where possible #115: FILE: tools/mesh-gatt/config-client.c:1061: + put_le16(parms[0], msg + n);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #115: FILE: tools/mesh-gatt/config-client.c:1061: + put_le16(parms[0], msg + n);$ ERROR:CODE_INDENT: code indent should use tabs where possible #116: FILE: tools/mesh-gatt/config-client.c:1062: + n += 2;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #116: FILE: tools/mesh-gatt/config-client.c:1062: + n += 2;$ ERROR:CODE_INDENT: code indent should use tabs where possible #117: FILE: tools/mesh-gatt/config-client.c:1063: + /* Subscription Address */$ ERROR:CODE_INDENT: code indent should use tabs where possible #118: FILE: tools/mesh-gatt/config-client.c:1064: + put_le16(parms[1], msg + n);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #118: FILE: tools/mesh-gatt/config-client.c:1064: + put_le16(parms[1], msg + n);$ ERROR:CODE_INDENT: code indent should use tabs where possible #119: FILE: tools/mesh-gatt/config-client.c:1065: + n += 2;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #119: FILE: tools/mesh-gatt/config-client.c:1065: + n += 2;$ ERROR:CODE_INDENT: code indent should use tabs where possible #120: FILE: tools/mesh-gatt/config-client.c:1066: + /* SIG Model ID */$ ERROR:CODE_INDENT: code indent should use tabs where possible #121: FILE: tools/mesh-gatt/config-client.c:1067: + put_le16(parms[2], msg + n);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #121: FILE: tools/mesh-gatt/config-client.c:1067: + put_le16(parms[2], msg + n);$ ERROR:CODE_INDENT: code indent should use tabs where possible #122: FILE: tools/mesh-gatt/config-client.c:1068: + n += 2;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #122: FILE: tools/mesh-gatt/config-client.c:1068: + n += 2;$ ERROR:CODE_INDENT: code indent should use tabs where possible #124: FILE: tools/mesh-gatt/config-client.c:1070: + if (!config_send(msg, n)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #124: FILE: tools/mesh-gatt/config-client.c:1070: + if (!config_send(msg, n)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #125: FILE: tools/mesh-gatt/config-client.c:1071: + bt_shell_printf("Failed to send \"DELETE SUBSCRIPTION\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #125: FILE: tools/mesh-gatt/config-client.c:1071: + bt_shell_printf("Failed to send \"DELETE SUBSCRIPTION\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #126: FILE: tools/mesh-gatt/config-client.c:1072: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #126: FILE: tools/mesh-gatt/config-client.c:1072: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #127: FILE: tools/mesh-gatt/config-client.c:1073: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #127: FILE: tools/mesh-gatt/config-client.c:1073: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #129: FILE: tools/mesh-gatt/config-client.c:1075: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #129: FILE: tools/mesh-gatt/config-client.c:1075: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ /github/workspace/src/12662889.patch total: 28 errors, 24 warnings, 52 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile /github/workspace/src/12662889.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [BlueZ,5/6] tools/mesh-gatt: Add generic level model support ERROR:CODE_INDENT: code indent should use tabs where possible #154: FILE: tools/mesh-gatt/level-model.c:43: + if (action == ACTION_ADD) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #154: FILE: tools/mesh-gatt/level-model.c:43: + if (action == ACTION_ADD) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #155: FILE: tools/mesh-gatt/level-model.c:44: + if (level_app_idx != APP_IDX_INVALID) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #155: FILE: tools/mesh-gatt/level-model.c:44: + if (level_app_idx != APP_IDX_INVALID) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #156: FILE: tools/mesh-gatt/level-model.c:45: + return MESH_STATUS_INSUFF_RESOURCES;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #156: FILE: tools/mesh-gatt/level-model.c:45: + return MESH_STATUS_INSUFF_RESOURCES;$ ERROR:CODE_INDENT: code indent should use tabs where possible #157: FILE: tools/mesh-gatt/level-model.c:46: + } else {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #157: FILE: tools/mesh-gatt/level-model.c:46: + } else {$ ERROR:CODE_INDENT: code indent should use tabs where possible #158: FILE: tools/mesh-gatt/level-model.c:47: + level_app_idx = app_idx;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #158: FILE: tools/mesh-gatt/level-model.c:47: + level_app_idx = app_idx;$ ERROR:CODE_INDENT: code indent should use tabs where possible #159: FILE: tools/mesh-gatt/level-model.c:48: + bt_shell_printf("Level client model: new binding"$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #159: FILE: tools/mesh-gatt/level-model.c:48: + bt_shell_printf("Level client model: new binding"$ ERROR:CODE_INDENT: code indent should use tabs where possible #160: FILE: tools/mesh-gatt/level-model.c:49: + " %4.4x\n", app_idx);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #160: FILE: tools/mesh-gatt/level-model.c:49: + " %4.4x\n", app_idx);$ ERROR:CODE_INDENT: code indent should use tabs where possible #161: FILE: tools/mesh-gatt/level-model.c:50: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #161: FILE: tools/mesh-gatt/level-model.c:50: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #162: FILE: tools/mesh-gatt/level-model.c:51: + } else {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #162: FILE: tools/mesh-gatt/level-model.c:51: + } else {$ ERROR:CODE_INDENT: code indent should use tabs where possible #163: FILE: tools/mesh-gatt/level-model.c:52: + if (level_app_idx == app_idx)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #163: FILE: tools/mesh-gatt/level-model.c:52: + if (level_app_idx == app_idx)$ ERROR:CODE_INDENT: code indent should use tabs where possible #164: FILE: tools/mesh-gatt/level-model.c:53: + level_app_idx = APP_IDX_INVALID;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #164: FILE: tools/mesh-gatt/level-model.c:53: + level_app_idx = APP_IDX_INVALID;$ ERROR:CODE_INDENT: code indent should use tabs where possible #165: FILE: tools/mesh-gatt/level-model.c:54: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #165: FILE: tools/mesh-gatt/level-model.c:54: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #166: FILE: tools/mesh-gatt/level-model.c:55: + return MESH_STATUS_SUCCESS;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #166: FILE: tools/mesh-gatt/level-model.c:55: + return MESH_STATUS_SUCCESS;$ ERROR:CODE_INDENT: code indent should use tabs where possible #170: FILE: tools/mesh-gatt/level-model.c:59: + uint8_t step = (remaining_time & 0xc0) >> 6;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #170: FILE: tools/mesh-gatt/level-model.c:59: + uint8_t step = (remaining_time & 0xc0) >> 6;$ ERROR:CODE_INDENT: code indent should use tabs where possible #171: FILE: tools/mesh-gatt/level-model.c:60: + uint8_t count = remaining_time & 0x3f;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #171: FILE: tools/mesh-gatt/level-model.c:60: + uint8_t count = remaining_time & 0x3f;$ ERROR:CODE_INDENT: code indent should use tabs where possible #172: FILE: tools/mesh-gatt/level-model.c:61: + int secs = 0, msecs = 0, minutes = 0, hours = 0;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #172: FILE: tools/mesh-gatt/level-model.c:61: + int secs = 0, msecs = 0, minutes = 0, hours = 0;$ ERROR:CODE_INDENT: code indent should use tabs where possible #173: FILE: tools/mesh-gatt/level-model.c:62: + switch (step) {$ WARNING:LINE_SPACING: Missing a blank line after declarations #173: FILE: tools/mesh-gatt/level-model.c:62: + int secs = 0, msecs = 0, minutes = 0, hours = 0; + switch (step) { WARNING:LEADING_SPACE: please, no spaces at the start of a line #173: FILE: tools/mesh-gatt/level-model.c:62: + switch (step) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #174: FILE: tools/mesh-gatt/level-model.c:63: + case 0:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #174: FILE: tools/mesh-gatt/level-model.c:63: + case 0:$ ERROR:CODE_INDENT: code indent should use tabs where possible #175: FILE: tools/mesh-gatt/level-model.c:64: + msecs = 100 * count;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #175: FILE: tools/mesh-gatt/level-model.c:64: + msecs = 100 * count;$ ERROR:CODE_INDENT: code indent should use tabs where possible #176: FILE: tools/mesh-gatt/level-model.c:65: + secs = msecs / 1000;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #176: FILE: tools/mesh-gatt/level-model.c:65: + secs = msecs / 1000;$ ERROR:CODE_INDENT: code indent should use tabs where possible #177: FILE: tools/mesh-gatt/level-model.c:66: + msecs -= (secs * 1000);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #177: FILE: tools/mesh-gatt/level-model.c:66: + msecs -= (secs * 1000);$ ERROR:CODE_INDENT: code indent should use tabs where possible #178: FILE: tools/mesh-gatt/level-model.c:67: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #178: FILE: tools/mesh-gatt/level-model.c:67: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #179: FILE: tools/mesh-gatt/level-model.c:68: + case 1:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #179: FILE: tools/mesh-gatt/level-model.c:68: + case 1:$ ERROR:CODE_INDENT: code indent should use tabs where possible #180: FILE: tools/mesh-gatt/level-model.c:69: + secs = 1 * count;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #180: FILE: tools/mesh-gatt/level-model.c:69: + secs = 1 * count;$ ERROR:CODE_INDENT: code indent should use tabs where possible #181: FILE: tools/mesh-gatt/level-model.c:70: + minutes = secs / 60;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #181: FILE: tools/mesh-gatt/level-model.c:70: + minutes = secs / 60;$ ERROR:CODE_INDENT: code indent should use tabs where possible #182: FILE: tools/mesh-gatt/level-model.c:71: + secs -= (minutes * 60);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #182: FILE: tools/mesh-gatt/level-model.c:71: + secs -= (minutes * 60);$ ERROR:CODE_INDENT: code indent should use tabs where possible #183: FILE: tools/mesh-gatt/level-model.c:72: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #183: FILE: tools/mesh-gatt/level-model.c:72: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #184: FILE: tools/mesh-gatt/level-model.c:73: + case 2:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #184: FILE: tools/mesh-gatt/level-model.c:73: + case 2:$ ERROR:CODE_INDENT: code indent should use tabs where possible #185: FILE: tools/mesh-gatt/level-model.c:74: + secs = 10 * count;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #185: FILE: tools/mesh-gatt/level-model.c:74: + secs = 10 * count;$ ERROR:CODE_INDENT: code indent should use tabs where possible #186: FILE: tools/mesh-gatt/level-model.c:75: + minutes = secs / 60;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #186: FILE: tools/mesh-gatt/level-model.c:75: + minutes = secs / 60;$ ERROR:CODE_INDENT: code indent should use tabs where possible #187: FILE: tools/mesh-gatt/level-model.c:76: + secs -= (minutes * 60);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #187: FILE: tools/mesh-gatt/level-model.c:76: + secs -= (minutes * 60);$ ERROR:CODE_INDENT: code indent should use tabs where possible #188: FILE: tools/mesh-gatt/level-model.c:77: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #188: FILE: tools/mesh-gatt/level-model.c:77: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #189: FILE: tools/mesh-gatt/level-model.c:78: + case 3:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #189: FILE: tools/mesh-gatt/level-model.c:78: + case 3:$ ERROR:CODE_INDENT: code indent should use tabs where possible #190: FILE: tools/mesh-gatt/level-model.c:79: + minutes = 10 * count;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #190: FILE: tools/mesh-gatt/level-model.c:79: + minutes = 10 * count;$ ERROR:CODE_INDENT: code indent should use tabs where possible #191: FILE: tools/mesh-gatt/level-model.c:80: + hours = minutes / 60;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #191: FILE: tools/mesh-gatt/level-model.c:80: + hours = minutes / 60;$ ERROR:CODE_INDENT: code indent should use tabs where possible #192: FILE: tools/mesh-gatt/level-model.c:81: + minutes -= (hours * 60);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #192: FILE: tools/mesh-gatt/level-model.c:81: + minutes -= (hours * 60);$ ERROR:CODE_INDENT: code indent should use tabs where possible #193: FILE: tools/mesh-gatt/level-model.c:82: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #193: FILE: tools/mesh-gatt/level-model.c:82: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #194: FILE: tools/mesh-gatt/level-model.c:83: + default:$ ERROR:CODE_INDENT: code indent should use tabs where possible #195: FILE: tools/mesh-gatt/level-model.c:84: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #195: FILE: tools/mesh-gatt/level-model.c:84: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #196: FILE: tools/mesh-gatt/level-model.c:85: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #196: FILE: tools/mesh-gatt/level-model.c:85: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #197: FILE: tools/mesh-gatt/level-model.c:86: + bt_shell_printf("\n\t\tRemaining time: %d hrs %d mins %d secs %d"$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #197: FILE: tools/mesh-gatt/level-model.c:86: + bt_shell_printf("\n\t\tRemaining time: %d hrs %d mins %d secs %d"$ ERROR:CODE_INDENT: code indent should use tabs where possible #198: FILE: tools/mesh-gatt/level-model.c:87: + " msecs\n", hours, minutes, secs, msecs);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #198: FILE: tools/mesh-gatt/level-model.c:87: + " msecs\n", hours, minutes, secs, msecs);$ ERROR:CODE_INDENT: code indent should use tabs where possible #201: FILE: tools/mesh-gatt/level-model.c:90: + uint16_t len, void *user_data)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #201: FILE: tools/mesh-gatt/level-model.c:90: + uint16_t len, void *user_data)$ ERROR:CODE_INDENT: code indent should use tabs where possible #203: FILE: tools/mesh-gatt/level-model.c:92: + uint32_t opcode;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #203: FILE: tools/mesh-gatt/level-model.c:92: + uint32_t opcode;$ ERROR:CODE_INDENT: code indent should use tabs where possible #204: FILE: tools/mesh-gatt/level-model.c:93: + int n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #204: FILE: tools/mesh-gatt/level-model.c:93: + int n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #205: FILE: tools/mesh-gatt/level-model.c:94: + uint8_t *p;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #205: FILE: tools/mesh-gatt/level-model.c:94: + uint8_t *p;$ ERROR:CODE_INDENT: code indent should use tabs where possible #206: FILE: tools/mesh-gatt/level-model.c:95: + int16_t lev;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #206: FILE: tools/mesh-gatt/level-model.c:95: + int16_t lev;$ ERROR:CODE_INDENT: code indent should use tabs where possible #207: FILE: tools/mesh-gatt/level-model.c:96: + char s[128];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #207: FILE: tools/mesh-gatt/level-model.c:96: + char s[128];$ ERROR:CODE_INDENT: code indent should use tabs where possible #209: FILE: tools/mesh-gatt/level-model.c:98: + if (mesh_opcode_get(data, len, &opcode, &n)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #209: FILE: tools/mesh-gatt/level-model.c:98: + if (mesh_opcode_get(data, len, &opcode, &n)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #210: FILE: tools/mesh-gatt/level-model.c:99: + len -= n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #210: FILE: tools/mesh-gatt/level-model.c:99: + len -= n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #211: FILE: tools/mesh-gatt/level-model.c:100: + data += n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #211: FILE: tools/mesh-gatt/level-model.c:100: + data += n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #212: FILE: tools/mesh-gatt/level-model.c:101: + } else$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #212: FILE: tools/mesh-gatt/level-model.c:101: + } else$ ERROR:CODE_INDENT: code indent should use tabs where possible #213: FILE: tools/mesh-gatt/level-model.c:102: + return false;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #213: FILE: tools/mesh-gatt/level-model.c:102: + return false;$ ERROR:CODE_INDENT: code indent should use tabs where possible #215: FILE: tools/mesh-gatt/level-model.c:104: + switch (opcode) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #215: FILE: tools/mesh-gatt/level-model.c:104: + switch (opcode) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #216: FILE: tools/mesh-gatt/level-model.c:105: + default:$ ERROR:CODE_INDENT: code indent should use tabs where possible #217: FILE: tools/mesh-gatt/level-model.c:106: + return false;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #217: FILE: tools/mesh-gatt/level-model.c:106: + return false;$ ERROR:CODE_INDENT: code indent should use tabs where possible #218: FILE: tools/mesh-gatt/level-model.c:107: + case OP_GENERIC_LEVEL_STATUS:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #218: FILE: tools/mesh-gatt/level-model.c:107: + case OP_GENERIC_LEVEL_STATUS:$ ERROR:CODE_INDENT: code indent should use tabs where possible #219: FILE: tools/mesh-gatt/level-model.c:108: + bt_shell_printf("Level Model Message received (%d) opcode %x\n",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #219: FILE: tools/mesh-gatt/level-model.c:108: + bt_shell_printf("Level Model Message received (%d) opcode %x\n",$ ERROR:CODE_INDENT: code indent should use tabs where possible #220: FILE: tools/mesh-gatt/level-model.c:109: + len, opcode);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #220: FILE: tools/mesh-gatt/level-model.c:109: + len, opcode);$ ERROR:CODE_INDENT: code indent should use tabs where possible #221: FILE: tools/mesh-gatt/level-model.c:110: + print_byte_array("\t",data, len);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #221: FILE: tools/mesh-gatt/level-model.c:110: + print_byte_array("\t",data, len);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #221: FILE: tools/mesh-gatt/level-model.c:110: + print_byte_array("\t",data, len); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #223: FILE: tools/mesh-gatt/level-model.c:112: + if (len != 2 && len != 4 && len != 5)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #223: FILE: tools/mesh-gatt/level-model.c:112: + if (len != 2 && len != 4 && len != 5)$ ERROR:CODE_INDENT: code indent should use tabs where possible #224: FILE: tools/mesh-gatt/level-model.c:113: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #224: FILE: tools/mesh-gatt/level-model.c:113: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #225: FILE: tools/mesh-gatt/level-model.c:114: + lev = 0;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #225: FILE: tools/mesh-gatt/level-model.c:114: + lev = 0;$ ERROR:CODE_INDENT: code indent should use tabs where possible #226: FILE: tools/mesh-gatt/level-model.c:115: + p = (uint8_t *)&lev;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #226: FILE: tools/mesh-gatt/level-model.c:115: + p = (uint8_t *)&lev;$ ERROR:CODE_INDENT: code indent should use tabs where possible #228: FILE: tools/mesh-gatt/level-model.c:117: + p[0] = data[0];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #228: FILE: tools/mesh-gatt/level-model.c:117: + p[0] = data[0];$ ERROR:CODE_INDENT: code indent should use tabs where possible #229: FILE: tools/mesh-gatt/level-model.c:118: + p[1] = data[1];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #229: FILE: tools/mesh-gatt/level-model.c:118: + p[1] = data[1];$ ERROR:CODE_INDENT: code indent should use tabs where possible #231: FILE: tools/mesh-gatt/level-model.c:120: + p[1] = data[0];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #231: FILE: tools/mesh-gatt/level-model.c:120: + p[1] = data[0];$ ERROR:CODE_INDENT: code indent should use tabs where possible #232: FILE: tools/mesh-gatt/level-model.c:121: + p[0] = data[1];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #232: FILE: tools/mesh-gatt/level-model.c:121: + p[0] = data[1];$ ERROR:CODE_INDENT: code indent should use tabs where possible #237: FILE: tools/mesh-gatt/level-model.c:126: + sprintf(s, "Node %4.4x: Level Status present = %d",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #237: FILE: tools/mesh-gatt/level-model.c:126: + sprintf(s, "Node %4.4x: Level Status present = %d",$ ERROR:CODE_INDENT: code indent should use tabs where possible #238: FILE: tools/mesh-gatt/level-model.c:127: + src, lev);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #238: FILE: tools/mesh-gatt/level-model.c:127: + src, lev);$ ERROR:CODE_INDENT: code indent should use tabs where possible #239: FILE: tools/mesh-gatt/level-model.c:128: + if (len >= 4) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #239: FILE: tools/mesh-gatt/level-model.c:128: + if (len >= 4) {$ WARNING:LONG_LINE: line length of 87 exceeds 80 columns #240: FILE: tools/mesh-gatt/level-model.c:129: + lev = (int16_t)(((uint16_t)data[3] << 8) | (uint16_t)data[2]); ERROR:CODE_INDENT: code indent should use tabs where possible #240: FILE: tools/mesh-gatt/level-model.c:129: + lev = (int16_t)(((uint16_t)data[3] << 8) | (uint16_t)data[2]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #240: FILE: tools/mesh-gatt/level-model.c:129: + lev = (int16_t)(((uint16_t)data[3] << 8) | (uint16_t)data[2]);$ ERROR:CODE_INDENT: code indent should use tabs where possible #241: FILE: tools/mesh-gatt/level-model.c:130: + sprintf(s, ", target = %d",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #241: FILE: tools/mesh-gatt/level-model.c:130: + sprintf(s, ", target = %d",$ ERROR:CODE_INDENT: code indent should use tabs where possible #242: FILE: tools/mesh-gatt/level-model.c:131: + lev);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #242: FILE: tools/mesh-gatt/level-model.c:131: + lev);$ ERROR:CODE_INDENT: code indent should use tabs where possible #243: FILE: tools/mesh-gatt/level-model.c:132: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #243: FILE: tools/mesh-gatt/level-model.c:132: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #244: FILE: tools/mesh-gatt/level-model.c:133: + bt_shell_printf("%s\n", s);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #244: FILE: tools/mesh-gatt/level-model.c:133: + bt_shell_printf("%s\n", s);$ ERROR:CODE_INDENT: code indent should use tabs where possible #245: FILE: tools/mesh-gatt/level-model.c:134: + if(len == 5){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #245: FILE: tools/mesh-gatt/level-model.c:134: + if(len == 5){$ ERROR:SPACING: space required before the open brace '{' #245: FILE: tools/mesh-gatt/level-model.c:134: + if(len == 5){ ERROR:SPACING: space required before the open parenthesis '(' #245: FILE: tools/mesh-gatt/level-model.c:134: + if(len == 5){ WARNING:BRACES: braces {} are not necessary for single statement blocks #245: FILE: tools/mesh-gatt/level-model.c:134: + if(len == 5){ + print_remaining_time(data[4]); + } ERROR:CODE_INDENT: code indent should use tabs where possible #246: FILE: tools/mesh-gatt/level-model.c:135: + print_remaining_time(data[4]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #246: FILE: tools/mesh-gatt/level-model.c:135: + print_remaining_time(data[4]);$ ERROR:CODE_INDENT: code indent should use tabs where possible #247: FILE: tools/mesh-gatt/level-model.c:136: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #247: FILE: tools/mesh-gatt/level-model.c:136: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #248: FILE: tools/mesh-gatt/level-model.c:137: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #248: FILE: tools/mesh-gatt/level-model.c:137: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #249: FILE: tools/mesh-gatt/level-model.c:138: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #249: FILE: tools/mesh-gatt/level-model.c:138: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #250: FILE: tools/mesh-gatt/level-model.c:139: + return true;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #250: FILE: tools/mesh-gatt/level-model.c:139: + return true;$ ERROR:CODE_INDENT: code indent should use tabs where possible #256: FILE: tools/mesh-gatt/level-model.c:145: + uint32_t i;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #256: FILE: tools/mesh-gatt/level-model.c:145: + uint32_t i;$ ERROR:CODE_INDENT: code indent should use tabs where possible #257: FILE: tools/mesh-gatt/level-model.c:146: + if (!argc)$ WARNING:LINE_SPACING: Missing a blank line after declarations #257: FILE: tools/mesh-gatt/level-model.c:146: + uint32_t i; + if (!argc) WARNING:LEADING_SPACE: please, no spaces at the start of a line #257: FILE: tools/mesh-gatt/level-model.c:146: + if (!argc)$ ERROR:CODE_INDENT: code indent should use tabs where possible #258: FILE: tools/mesh-gatt/level-model.c:147: + return 0;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #258: FILE: tools/mesh-gatt/level-model.c:147: + return 0;$ ERROR:CODE_INDENT: code indent should use tabs where possible #259: FILE: tools/mesh-gatt/level-model.c:148: + --argc;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #259: FILE: tools/mesh-gatt/level-model.c:148: + --argc;$ ERROR:CODE_INDENT: code indent should use tabs where possible #260: FILE: tools/mesh-gatt/level-model.c:149: + ++argv;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #260: FILE: tools/mesh-gatt/level-model.c:149: + ++argv;$ ERROR:CODE_INDENT: code indent should use tabs where possible #261: FILE: tools/mesh-gatt/level-model.c:150: + if (!argc || argv[0][0] == '\0')$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #261: FILE: tools/mesh-gatt/level-model.c:150: + if (!argc || argv[0][0] == '\0')$ ERROR:CODE_INDENT: code indent should use tabs where possible #262: FILE: tools/mesh-gatt/level-model.c:151: + return 0;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #262: FILE: tools/mesh-gatt/level-model.c:151: + return 0;$ ERROR:CODE_INDENT: code indent should use tabs where possible #263: FILE: tools/mesh-gatt/level-model.c:152: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #263: FILE: tools/mesh-gatt/level-model.c:152: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc;$ WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #263: FILE: tools/mesh-gatt/level-model.c:152: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc; WARNING:ARRAY_SIZE: Prefer ARRAY_SIZE(parms) #263: FILE: tools/mesh-gatt/level-model.c:152: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc; ERROR:CODE_INDENT: code indent should use tabs where possible #264: FILE: tools/mesh-gatt/level-model.c:153: + i++) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #264: FILE: tools/mesh-gatt/level-model.c:153: + i++) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #265: FILE: tools/mesh-gatt/level-model.c:154: + if(sscanf(argv[i], "%d", &parms[i]) <= 0)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #265: FILE: tools/mesh-gatt/level-model.c:154: + if(sscanf(argv[i], "%d", &parms[i]) <= 0)$ ERROR:SPACING: space required before the open parenthesis '(' #265: FILE: tools/mesh-gatt/level-model.c:154: + if(sscanf(argv[i], "%d", &parms[i]) <= 0) ERROR:CODE_INDENT: code indent should use tabs where possible #266: FILE: tools/mesh-gatt/level-model.c:155: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #266: FILE: tools/mesh-gatt/level-model.c:155: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #267: FILE: tools/mesh-gatt/level-model.c:156: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #267: FILE: tools/mesh-gatt/level-model.c:156: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #268: FILE: tools/mesh-gatt/level-model.c:157: + return i;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #268: FILE: tools/mesh-gatt/level-model.c:157: + return i;$ ERROR:CODE_INDENT: code indent should use tabs where possible #272: FILE: tools/mesh-gatt/level-model.c:161: + uint32_t dst;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #272: FILE: tools/mesh-gatt/level-model.c:161: + uint32_t dst;$ ERROR:CODE_INDENT: code indent should use tabs where possible #273: FILE: tools/mesh-gatt/level-model.c:162: + char *end;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #273: FILE: tools/mesh-gatt/level-model.c:162: + char *end;$ ERROR:CODE_INDENT: code indent should use tabs where possible #274: FILE: tools/mesh-gatt/level-model.c:163: + dst = strtol(argv[1], &end, 16);$ WARNING:LINE_SPACING: Missing a blank line after declarations #274: FILE: tools/mesh-gatt/level-model.c:163: + char *end; + dst = strtol(argv[1], &end, 16); WARNING:LEADING_SPACE: please, no spaces at the start of a line #274: FILE: tools/mesh-gatt/level-model.c:163: + dst = strtol(argv[1], &end, 16);$ ERROR:CODE_INDENT: code indent should use tabs where possible #275: FILE: tools/mesh-gatt/level-model.c:164: + if (end != (argv[1] + 4)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #275: FILE: tools/mesh-gatt/level-model.c:164: + if (end != (argv[1] + 4)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #276: FILE: tools/mesh-gatt/level-model.c:165: + bt_shell_printf("Bad unicast address %s: "$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #276: FILE: tools/mesh-gatt/level-model.c:165: + bt_shell_printf("Bad unicast address %s: "$ ERROR:CODE_INDENT: code indent should use tabs where possible #277: FILE: tools/mesh-gatt/level-model.c:166: + "expected format 4 digit hex\n", argv[1]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #277: FILE: tools/mesh-gatt/level-model.c:166: + "expected format 4 digit hex\n", argv[1]);$ ERROR:CODE_INDENT: code indent should use tabs where possible #278: FILE: tools/mesh-gatt/level-model.c:167: + target = UNASSIGNED_ADDRESS;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #278: FILE: tools/mesh-gatt/level-model.c:167: + target = UNASSIGNED_ADDRESS;$ ERROR:CODE_INDENT: code indent should use tabs where possible #279: FILE: tools/mesh-gatt/level-model.c:168: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #279: FILE: tools/mesh-gatt/level-model.c:168: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #280: FILE: tools/mesh-gatt/level-model.c:169: + } else {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #280: FILE: tools/mesh-gatt/level-model.c:169: + } else {$ ERROR:CODE_INDENT: code indent should use tabs where possible #281: FILE: tools/mesh-gatt/level-model.c:170: + bt_shell_printf("Controlling Level for node %4.4x\n", dst);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #281: FILE: tools/mesh-gatt/level-model.c:170: + bt_shell_printf("Controlling Level for node %4.4x\n", dst);$ ERROR:CODE_INDENT: code indent should use tabs where possible #282: FILE: tools/mesh-gatt/level-model.c:171: + target = dst;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #282: FILE: tools/mesh-gatt/level-model.c:171: + target = dst;$ ERROR:CODE_INDENT: code indent should use tabs where possible #283: FILE: tools/mesh-gatt/level-model.c:172: + set_menu_prompt("Level", argv[1]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #283: FILE: tools/mesh-gatt/level-model.c:172: + set_menu_prompt("Level", argv[1]);$ ERROR:CODE_INDENT: code indent should use tabs where possible #284: FILE: tools/mesh-gatt/level-model.c:173: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #284: FILE: tools/mesh-gatt/level-model.c:173: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ ERROR:CODE_INDENT: code indent should use tabs where possible #285: FILE: tools/mesh-gatt/level-model.c:174: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #285: FILE: tools/mesh-gatt/level-model.c:174: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #289: FILE: tools/mesh-gatt/level-model.c:178: + struct mesh_node *node = node_get_local_node();$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #289: FILE: tools/mesh-gatt/level-model.c:178: + struct mesh_node *node = node_get_local_node();$ ERROR:CODE_INDENT: code indent should use tabs where possible #290: FILE: tools/mesh-gatt/level-model.c:179: + uint8_t ttl;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #290: FILE: tools/mesh-gatt/level-model.c:179: + uint8_t ttl;$ ERROR:CODE_INDENT: code indent should use tabs where possible #291: FILE: tools/mesh-gatt/level-model.c:180: + if(!node)$ WARNING:LINE_SPACING: Missing a blank line after declarations #291: FILE: tools/mesh-gatt/level-model.c:180: + uint8_t ttl; + if(!node) WARNING:LEADING_SPACE: please, no spaces at the start of a line #291: FILE: tools/mesh-gatt/level-model.c:180: + if(!node)$ ERROR:SPACING: space required before the open parenthesis '(' #291: FILE: tools/mesh-gatt/level-model.c:180: + if(!node) ERROR:CODE_INDENT: code indent should use tabs where possible #292: FILE: tools/mesh-gatt/level-model.c:181: + return false;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #292: FILE: tools/mesh-gatt/level-model.c:181: + return false;$ ERROR:CODE_INDENT: code indent should use tabs where possible #293: FILE: tools/mesh-gatt/level-model.c:182: + ttl = node_get_default_ttl(node);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #293: FILE: tools/mesh-gatt/level-model.c:182: + ttl = node_get_default_ttl(node);$ ERROR:CODE_INDENT: code indent should use tabs where possible #294: FILE: tools/mesh-gatt/level-model.c:183: + return net_access_layer_send(ttl, node_get_primary(node),$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #294: FILE: tools/mesh-gatt/level-model.c:183: + return net_access_layer_send(ttl, node_get_primary(node),$ ERROR:CODE_INDENT: code indent should use tabs where possible #295: FILE: tools/mesh-gatt/level-model.c:184: + target, level_app_idx, buf, len);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #295: FILE: tools/mesh-gatt/level-model.c:184: + target, level_app_idx, buf, len);$ ERROR:CODE_INDENT: code indent should use tabs where possible #299: FILE: tools/mesh-gatt/level-model.c:188: + uint16_t n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #299: FILE: tools/mesh-gatt/level-model.c:188: + uint16_t n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #300: FILE: tools/mesh-gatt/level-model.c:189: + uint8_t msg[32];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #300: FILE: tools/mesh-gatt/level-model.c:189: + uint8_t msg[32];$ ERROR:CODE_INDENT: code indent should use tabs where possible #301: FILE: tools/mesh-gatt/level-model.c:190: + struct mesh_node *node;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #301: FILE: tools/mesh-gatt/level-model.c:190: + struct mesh_node *node;$ ERROR:CODE_INDENT: code indent should use tabs where possible #302: FILE: tools/mesh-gatt/level-model.c:191: + if (IS_UNASSIGNED(target)) {$ WARNING:LINE_SPACING: Missing a blank line after declarations #302: FILE: tools/mesh-gatt/level-model.c:191: + struct mesh_node *node; + if (IS_UNASSIGNED(target)) { WARNING:LEADING_SPACE: please, no spaces at the start of a line #302: FILE: tools/mesh-gatt/level-model.c:191: + if (IS_UNASSIGNED(target)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #303: FILE: tools/mesh-gatt/level-model.c:192: + bt_shell_printf("Destination not set\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #303: FILE: tools/mesh-gatt/level-model.c:192: + bt_shell_printf("Destination not set\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #304: FILE: tools/mesh-gatt/level-model.c:193: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #304: FILE: tools/mesh-gatt/level-model.c:193: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #305: FILE: tools/mesh-gatt/level-model.c:194: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #305: FILE: tools/mesh-gatt/level-model.c:194: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #306: FILE: tools/mesh-gatt/level-model.c:195: + node = node_find_by_addr(target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #306: FILE: tools/mesh-gatt/level-model.c:195: + node = node_find_by_addr(target);$ ERROR:CODE_INDENT: code indent should use tabs where possible #308: FILE: tools/mesh-gatt/level-model.c:197: + if (!node){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #308: FILE: tools/mesh-gatt/level-model.c:197: + if (!node){$ ERROR:SPACING: space required before the open brace '{' #308: FILE: tools/mesh-gatt/level-model.c:197: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #308: FILE: tools/mesh-gatt/level-model.c:197: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #309: FILE: tools/mesh-gatt/level-model.c:198: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:CODE_INDENT: code indent should use tabs where possible #309: FILE: tools/mesh-gatt/level-model.c:198: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #309: FILE: tools/mesh-gatt/level-model.c:198: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #309: FILE: tools/mesh-gatt/level-model.c:198: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #310: FILE: tools/mesh-gatt/level-model.c:199: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #310: FILE: tools/mesh-gatt/level-model.c:199: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #312: FILE: tools/mesh-gatt/level-model.c:201: + n = mesh_opcode_set(OP_GENERIC_LEVEL_GET, msg);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #312: FILE: tools/mesh-gatt/level-model.c:201: + n = mesh_opcode_set(OP_GENERIC_LEVEL_GET, msg);$ ERROR:CODE_INDENT: code indent should use tabs where possible #313: FILE: tools/mesh-gatt/level-model.c:202: + if (!send_cmd(msg, n)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #313: FILE: tools/mesh-gatt/level-model.c:202: + if (!send_cmd(msg, n)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #314: FILE: tools/mesh-gatt/level-model.c:203: + bt_shell_printf("Failed to send \"GENERIC LEVEL GET\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #314: FILE: tools/mesh-gatt/level-model.c:203: + bt_shell_printf("Failed to send \"GENERIC LEVEL GET\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #315: FILE: tools/mesh-gatt/level-model.c:204: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #315: FILE: tools/mesh-gatt/level-model.c:204: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #316: FILE: tools/mesh-gatt/level-model.c:205: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #316: FILE: tools/mesh-gatt/level-model.c:205: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #317: FILE: tools/mesh-gatt/level-model.c:206: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #317: FILE: tools/mesh-gatt/level-model.c:206: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ ERROR:CODE_INDENT: code indent should use tabs where possible #321: FILE: tools/mesh-gatt/level-model.c:210: + uint16_t n;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #321: FILE: tools/mesh-gatt/level-model.c:210: + uint16_t n;$ ERROR:CODE_INDENT: code indent should use tabs where possible #322: FILE: tools/mesh-gatt/level-model.c:211: + uint8_t msg[32];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #322: FILE: tools/mesh-gatt/level-model.c:211: + uint8_t msg[32];$ ERROR:CODE_INDENT: code indent should use tabs where possible #323: FILE: tools/mesh-gatt/level-model.c:212: + struct mesh_node *node;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #323: FILE: tools/mesh-gatt/level-model.c:212: + struct mesh_node *node;$ ERROR:CODE_INDENT: code indent should use tabs where possible #324: FILE: tools/mesh-gatt/level-model.c:213: + uint8_t *p;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #324: FILE: tools/mesh-gatt/level-model.c:213: + uint8_t *p;$ ERROR:CODE_INDENT: code indent should use tabs where possible #325: FILE: tools/mesh-gatt/level-model.c:214: + int np;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #325: FILE: tools/mesh-gatt/level-model.c:214: + int np;$ ERROR:CODE_INDENT: code indent should use tabs where possible #326: FILE: tools/mesh-gatt/level-model.c:215: + uint32_t opcode;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #326: FILE: tools/mesh-gatt/level-model.c:215: + uint32_t opcode;$ ERROR:CODE_INDENT: code indent should use tabs where possible #327: FILE: tools/mesh-gatt/level-model.c:216: + int16_t level;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #327: FILE: tools/mesh-gatt/level-model.c:216: + int16_t level;$ ERROR:CODE_INDENT: code indent should use tabs where possible #329: FILE: tools/mesh-gatt/level-model.c:218: + if (IS_UNASSIGNED(target)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #329: FILE: tools/mesh-gatt/level-model.c:218: + if (IS_UNASSIGNED(target)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #330: FILE: tools/mesh-gatt/level-model.c:219: + bt_shell_printf("Destination not set\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #330: FILE: tools/mesh-gatt/level-model.c:219: + bt_shell_printf("Destination not set\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #331: FILE: tools/mesh-gatt/level-model.c:220: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #331: FILE: tools/mesh-gatt/level-model.c:220: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #332: FILE: tools/mesh-gatt/level-model.c:221: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #332: FILE: tools/mesh-gatt/level-model.c:221: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #333: FILE: tools/mesh-gatt/level-model.c:222: + node = node_find_by_addr(target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #333: FILE: tools/mesh-gatt/level-model.c:222: + node = node_find_by_addr(target);$ ERROR:CODE_INDENT: code indent should use tabs where possible #335: FILE: tools/mesh-gatt/level-model.c:224: + if (!node){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #335: FILE: tools/mesh-gatt/level-model.c:224: + if (!node){$ ERROR:SPACING: space required before the open brace '{' #335: FILE: tools/mesh-gatt/level-model.c:224: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #335: FILE: tools/mesh-gatt/level-model.c:224: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #336: FILE: tools/mesh-gatt/level-model.c:225: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:CODE_INDENT: code indent should use tabs where possible #336: FILE: tools/mesh-gatt/level-model.c:225: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #336: FILE: tools/mesh-gatt/level-model.c:225: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #336: FILE: tools/mesh-gatt/level-model.c:225: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #337: FILE: tools/mesh-gatt/level-model.c:226: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #337: FILE: tools/mesh-gatt/level-model.c:226: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #339: FILE: tools/mesh-gatt/level-model.c:228: + np = read_input_parameters(argc, argv);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #339: FILE: tools/mesh-gatt/level-model.c:228: + np = read_input_parameters(argc, argv);$ ERROR:CODE_INDENT: code indent should use tabs where possible #340: FILE: tools/mesh-gatt/level-model.c:229: + if ((np != 1) && (np != 2) &&$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #340: FILE: tools/mesh-gatt/level-model.c:229: + if ((np != 1) && (np != 2) &&$ ERROR:CODE_INDENT: code indent should use tabs where possible #341: FILE: tools/mesh-gatt/level-model.c:230: + parms[0] < -32768 && parms[0] > 32767 &&$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #341: FILE: tools/mesh-gatt/level-model.c:230: + parms[0] < -32768 && parms[0] > 32767 &&$ ERROR:CODE_INDENT: code indent should use tabs where possible #342: FILE: tools/mesh-gatt/level-model.c:231: + parms[1] != 0 && parms[1] != 1) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #342: FILE: tools/mesh-gatt/level-model.c:231: + parms[1] != 0 && parms[1] != 1) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #343: FILE: tools/mesh-gatt/level-model.c:232: + bt_shell_printf("Bad arguments: Expecting an integer "$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #343: FILE: tools/mesh-gatt/level-model.c:232: + bt_shell_printf("Bad arguments: Expecting an integer "$ ERROR:CODE_INDENT: code indent should use tabs where possible #344: FILE: tools/mesh-gatt/level-model.c:233: + "-32768 to 32767 and an optional 0 or 1 as unack\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #344: FILE: tools/mesh-gatt/level-model.c:233: + "-32768 to 32767 and an optional 0 or 1 as unack\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #345: FILE: tools/mesh-gatt/level-model.c:234: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #345: FILE: tools/mesh-gatt/level-model.c:234: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #346: FILE: tools/mesh-gatt/level-model.c:235: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #346: FILE: tools/mesh-gatt/level-model.c:235: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){$ ERROR:SPACING: spaces required around that '==' (ctx:VxV) #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ ^ ERROR:SPACING: space required before the open brace '{' #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ ERROR:SPACING: space prohibited after that open parenthesis '(' #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ ERROR:SPACING: space prohibited before that close parenthesis ')' #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ ERROR:SPACING: space required before the open parenthesis '(' #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ WARNING:BRACES: braces {} are not necessary for any arm of this statement #348: FILE: tools/mesh-gatt/level-model.c:237: + if( (np==2) && parms[1] ){ [...] + }else{ [...] ERROR:CODE_INDENT: code indent should use tabs where possible #349: FILE: tools/mesh-gatt/level-model.c:238: + opcode = OP_GENERIC_LEVEL_SET_UNACK;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #349: FILE: tools/mesh-gatt/level-model.c:238: + opcode = OP_GENERIC_LEVEL_SET_UNACK;$ ERROR:CODE_INDENT: code indent should use tabs where possible #350: FILE: tools/mesh-gatt/level-model.c:239: + }else{$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #350: FILE: tools/mesh-gatt/level-model.c:239: + }else{$ ERROR:SPACING: space required before the open brace '{' #350: FILE: tools/mesh-gatt/level-model.c:239: + }else{ ERROR:SPACING: space required after that close brace '}' #350: FILE: tools/mesh-gatt/level-model.c:239: + }else{ ERROR:CODE_INDENT: code indent should use tabs where possible #351: FILE: tools/mesh-gatt/level-model.c:240: + opcode = OP_GENERIC_LEVEL_SET;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #351: FILE: tools/mesh-gatt/level-model.c:240: + opcode = OP_GENERIC_LEVEL_SET;$ ERROR:CODE_INDENT: code indent should use tabs where possible #352: FILE: tools/mesh-gatt/level-model.c:241: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #352: FILE: tools/mesh-gatt/level-model.c:241: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #354: FILE: tools/mesh-gatt/level-model.c:243: + n = mesh_opcode_set(opcode, msg);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #354: FILE: tools/mesh-gatt/level-model.c:243: + n = mesh_opcode_set(opcode, msg);$ ERROR:CODE_INDENT: code indent should use tabs where possible #355: FILE: tools/mesh-gatt/level-model.c:244: + level = (int16_t)parms[0];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #355: FILE: tools/mesh-gatt/level-model.c:244: + level = (int16_t)parms[0];$ ERROR:CODE_INDENT: code indent should use tabs where possible #356: FILE: tools/mesh-gatt/level-model.c:245: + p = (uint8_t *)&level;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #356: FILE: tools/mesh-gatt/level-model.c:245: + p = (uint8_t *)&level;$ ERROR:CODE_INDENT: code indent should use tabs where possible #358: FILE: tools/mesh-gatt/level-model.c:247: + msg[n++] = p[0];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #358: FILE: tools/mesh-gatt/level-model.c:247: + msg[n++] = p[0];$ ERROR:CODE_INDENT: code indent should use tabs where possible #359: FILE: tools/mesh-gatt/level-model.c:248: + msg[n++] = p[1];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #359: FILE: tools/mesh-gatt/level-model.c:248: + msg[n++] = p[1];$ ERROR:CODE_INDENT: code indent should use tabs where possible #361: FILE: tools/mesh-gatt/level-model.c:250: + msg[n++] = p[1];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #361: FILE: tools/mesh-gatt/level-model.c:250: + msg[n++] = p[1];$ ERROR:CODE_INDENT: code indent should use tabs where possible #362: FILE: tools/mesh-gatt/level-model.c:251: + msg[n++] = p[0];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #362: FILE: tools/mesh-gatt/level-model.c:251: + msg[n++] = p[0];$ ERROR:CODE_INDENT: code indent should use tabs where possible #367: FILE: tools/mesh-gatt/level-model.c:256: + msg[n++] = trans_id++;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #367: FILE: tools/mesh-gatt/level-model.c:256: + msg[n++] = trans_id++;$ ERROR:CODE_INDENT: code indent should use tabs where possible #368: FILE: tools/mesh-gatt/level-model.c:257: + if (!send_cmd(msg, n)) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #368: FILE: tools/mesh-gatt/level-model.c:257: + if (!send_cmd(msg, n)) {$ ERROR:CODE_INDENT: code indent should use tabs where possible #369: FILE: tools/mesh-gatt/level-model.c:258: + bt_shell_printf("Failed to send \"GENERIC LEVEL SET\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #369: FILE: tools/mesh-gatt/level-model.c:258: + bt_shell_printf("Failed to send \"GENERIC LEVEL SET\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #370: FILE: tools/mesh-gatt/level-model.c:259: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #370: FILE: tools/mesh-gatt/level-model.c:259: + return bt_shell_noninteractive_quit(EXIT_FAILURE);$ ERROR:CODE_INDENT: code indent should use tabs where possible #371: FILE: tools/mesh-gatt/level-model.c:260: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #371: FILE: tools/mesh-gatt/level-model.c:260: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #372: FILE: tools/mesh-gatt/level-model.c:261: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #372: FILE: tools/mesh-gatt/level-model.c:261: + return bt_shell_noninteractive_quit(EXIT_SUCCESS);$ ERROR:CODE_INDENT: code indent should use tabs where possible #375: FILE: tools/mesh-gatt/level-model.c:264: + .name = "level",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #375: FILE: tools/mesh-gatt/level-model.c:264: + .name = "level",$ ERROR:CODE_INDENT: code indent should use tabs where possible #376: FILE: tools/mesh-gatt/level-model.c:265: + .desc = "Level Model Submenu",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #376: FILE: tools/mesh-gatt/level-model.c:265: + .desc = "Level Model Submenu",$ ERROR:CODE_INDENT: code indent should use tabs where possible #377: FILE: tools/mesh-gatt/level-model.c:266: + .entries = {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #377: FILE: tools/mesh-gatt/level-model.c:266: + .entries = {$ WARNING:LONG_LINE: line length of 85 exceeds 80 columns #378: FILE: tools/mesh-gatt/level-model.c:267: + {"target", "<unicast>", cmd_set_node, ERROR:CODE_INDENT: code indent should use tabs where possible #378: FILE: tools/mesh-gatt/level-model.c:267: + {"target",^I^I"<unicast>",^I^I^Icmd_set_node,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #378: FILE: tools/mesh-gatt/level-model.c:267: + {"target",^I^I"<unicast>",^I^I^Icmd_set_node,$ ERROR:CODE_INDENT: code indent should use tabs where possible #379: FILE: tools/mesh-gatt/level-model.c:268: + "Set node to configure"},$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #379: FILE: tools/mesh-gatt/level-model.c:268: + "Set node to configure"},$ WARNING:LONG_LINE: line length of 87 exceeds 80 columns #380: FILE: tools/mesh-gatt/level-model.c:269: + {"get", NULL, cmd_get_status, ERROR:CODE_INDENT: code indent should use tabs where possible #380: FILE: tools/mesh-gatt/level-model.c:269: + {"get",^I^I^INULL,^I^I^I^Icmd_get_status,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #380: FILE: tools/mesh-gatt/level-model.c:269: + {"get",^I^I^INULL,^I^I^I^Icmd_get_status,$ ERROR:CODE_INDENT: code indent should use tabs where possible #381: FILE: tools/mesh-gatt/level-model.c:270: + "Get Level status"},$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #381: FILE: tools/mesh-gatt/level-model.c:270: + "Get Level status"},$ ERROR:CODE_INDENT: code indent should use tabs where possible #382: FILE: tools/mesh-gatt/level-model.c:271: + {"level",^I^I"<-32768/+32767> [unack]",^Icmd_set,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #382: FILE: tools/mesh-gatt/level-model.c:271: + {"level",^I^I"<-32768/+32767> [unack]",^Icmd_set,$ ERROR:CODE_INDENT: code indent should use tabs where possible #383: FILE: tools/mesh-gatt/level-model.c:272: + "Send \"SET Level\" command"},$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #383: FILE: tools/mesh-gatt/level-model.c:272: + "Send \"SET Level\" command"},$ ERROR:CODE_INDENT: code indent should use tabs where possible #384: FILE: tools/mesh-gatt/level-model.c:273: + {} },$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #384: FILE: tools/mesh-gatt/level-model.c:273: + {} },$ ERROR:CODE_INDENT: code indent should use tabs where possible #387: FILE: tools/mesh-gatt/level-model.c:276: + client_msg_recvd,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #387: FILE: tools/mesh-gatt/level-model.c:276: + client_msg_recvd,$ ERROR:CODE_INDENT: code indent should use tabs where possible #388: FILE: tools/mesh-gatt/level-model.c:277: + client_bind,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #388: FILE: tools/mesh-gatt/level-model.c:277: + client_bind,$ ERROR:CODE_INDENT: code indent should use tabs where possible #389: FILE: tools/mesh-gatt/level-model.c:278: + NULL,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #389: FILE: tools/mesh-gatt/level-model.c:278: + NULL,$ ERROR:CODE_INDENT: code indent should use tabs where possible #390: FILE: tools/mesh-gatt/level-model.c:279: + NULL$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #390: FILE: tools/mesh-gatt/level-model.c:279: + NULL$ ERROR:CODE_INDENT: code indent should use tabs where possible #394: FILE: tools/mesh-gatt/level-model.c:283: + if (!node_local_model_register(ele, GENERIC_LEVEL_CLIENT_MODEL_ID,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #394: FILE: tools/mesh-gatt/level-model.c:283: + if (!node_local_model_register(ele, GENERIC_LEVEL_CLIENT_MODEL_ID,$ ERROR:CODE_INDENT: code indent should use tabs where possible #395: FILE: tools/mesh-gatt/level-model.c:284: + &client_cbs, NULL))$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #395: FILE: tools/mesh-gatt/level-model.c:284: + &client_cbs, NULL))$ ERROR:CODE_INDENT: code indent should use tabs where possible #396: FILE: tools/mesh-gatt/level-model.c:285: + return false;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #396: FILE: tools/mesh-gatt/level-model.c:285: + return false;$ ERROR:CODE_INDENT: code indent should use tabs where possible #397: FILE: tools/mesh-gatt/level-model.c:286: + bt_shell_add_submenu(&level_menu);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #397: FILE: tools/mesh-gatt/level-model.c:286: + bt_shell_add_submenu(&level_menu);$ ERROR:CODE_INDENT: code indent should use tabs where possible #398: FILE: tools/mesh-gatt/level-model.c:287: + return true;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #398: FILE: tools/mesh-gatt/level-model.c:287: + return true;$ /github/workspace/src/12662891.patch total: 209 errors, 207 warnings, 353 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile /github/workspace/src/12662891.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. [BlueZ,6/6] tools/mesh-gatt: Add generic power onoff client model ERROR:CODE_INDENT: code indent should use tabs where possible #181: FILE: tools/mesh-gatt/onpowerup-model.c:45: + if (power_onoff_app_idx != APP_IDX_INVALID) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #181: FILE: tools/mesh-gatt/onpowerup-model.c:45: + if (power_onoff_app_idx != APP_IDX_INVALID) {$ WARNING:UNNECESSARY_ELSE: else is not generally useful after a break or return #183: FILE: tools/mesh-gatt/onpowerup-model.c:47: + return MESH_STATUS_INSUFF_RESOURCES; + } else { ERROR:CODE_INDENT: code indent should use tabs where possible #184: FILE: tools/mesh-gatt/onpowerup-model.c:48: + power_onoff_app_idx = app_idx;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #184: FILE: tools/mesh-gatt/onpowerup-model.c:48: + power_onoff_app_idx = app_idx;$ ERROR:CODE_INDENT: code indent should use tabs where possible #185: FILE: tools/mesh-gatt/onpowerup-model.c:49: + bt_shell_printf("OnPowerUp client model: new binding"$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #185: FILE: tools/mesh-gatt/onpowerup-model.c:49: + bt_shell_printf("OnPowerUp client model: new binding"$ ERROR:CODE_INDENT: code indent should use tabs where possible #189: FILE: tools/mesh-gatt/onpowerup-model.c:53: + if (power_onoff_app_idx == app_idx)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #189: FILE: tools/mesh-gatt/onpowerup-model.c:53: + if (power_onoff_app_idx == app_idx)$ ERROR:CODE_INDENT: code indent should use tabs where possible #190: FILE: tools/mesh-gatt/onpowerup-model.c:54: + power_onoff_app_idx = APP_IDX_INVALID;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #190: FILE: tools/mesh-gatt/onpowerup-model.c:54: + power_onoff_app_idx = APP_IDX_INVALID;$ ERROR:CODE_INDENT: code indent should use tabs where possible #200: FILE: tools/mesh-gatt/onpowerup-model.c:64: + char s[10];$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #200: FILE: tools/mesh-gatt/onpowerup-model.c:64: + char s[10];$ ERROR:CODE_INDENT: code indent should use tabs where possible #212: FILE: tools/mesh-gatt/onpowerup-model.c:76: + case OP_GENERIC_POWER_ONOFF_STATUS:$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #212: FILE: tools/mesh-gatt/onpowerup-model.c:76: + case OP_GENERIC_POWER_ONOFF_STATUS:$ WARNING:LONG_LINE_STRING: line length of 84 exceeds 80 columns #213: FILE: tools/mesh-gatt/onpowerup-model.c:77: + bt_shell_printf("OnPowerUp Model Message received (%d) opcode %x\n", ERROR:CODE_INDENT: code indent should use tabs where possible #213: FILE: tools/mesh-gatt/onpowerup-model.c:77: + bt_shell_printf("OnPowerUp Model Message received (%d) opcode %x\n",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #213: FILE: tools/mesh-gatt/onpowerup-model.c:77: + bt_shell_printf("OnPowerUp Model Message received (%d) opcode %x\n",$ WARNING:LONG_LINE: line length of 85 exceeds 80 columns #214: FILE: tools/mesh-gatt/onpowerup-model.c:78: + len, opcode); ERROR:CODE_INDENT: code indent should use tabs where possible #214: FILE: tools/mesh-gatt/onpowerup-model.c:78: + len, opcode);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #214: FILE: tools/mesh-gatt/onpowerup-model.c:78: + len, opcode);$ ERROR:CODE_INDENT: code indent should use tabs where possible #215: FILE: tools/mesh-gatt/onpowerup-model.c:79: + print_byte_array("\t",data, len);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #215: FILE: tools/mesh-gatt/onpowerup-model.c:79: + print_byte_array("\t",data, len);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #215: FILE: tools/mesh-gatt/onpowerup-model.c:79: + print_byte_array("\t",data, len); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #216: FILE: tools/mesh-gatt/onpowerup-model.c:80: + if (len != 1)$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #216: FILE: tools/mesh-gatt/onpowerup-model.c:80: + if (len != 1)$ ERROR:CODE_INDENT: code indent should use tabs where possible #217: FILE: tools/mesh-gatt/onpowerup-model.c:81: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #217: FILE: tools/mesh-gatt/onpowerup-model.c:81: + break;$ ERROR:CODE_INDENT: code indent should use tabs where possible #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){$ WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (16, 20) #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){ + sprintf(s, "%s", "OFF"); ERROR:SPACING: space required before the open brace '{' #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){ ERROR:SPACING: space required before the open parenthesis '(' #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){ WARNING:BRACES: braces {} are not necessary for any arm of this statement #218: FILE: tools/mesh-gatt/onpowerup-model.c:82: + if(data[0] == 0){ [...] + }else if(data[0] == 1){ [...] + }else if(data[0] == 2){ [...] + }else{ [...] ERROR:CODE_INDENT: code indent should use tabs where possible #219: FILE: tools/mesh-gatt/onpowerup-model.c:83: + sprintf(s, "%s", "OFF");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #219: FILE: tools/mesh-gatt/onpowerup-model.c:83: + sprintf(s, "%s", "OFF");$ ERROR:CODE_INDENT: code indent should use tabs where possible #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){$ WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (16, 20) #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){ + sprintf(s, "%s", "ON"); ERROR:SPACING: space required before the open brace '{' #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){ ERROR:SPACING: space required after that close brace '}' #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){ ERROR:SPACING: space required before the open parenthesis '(' #220: FILE: tools/mesh-gatt/onpowerup-model.c:84: + }else if(data[0] == 1){ ERROR:CODE_INDENT: code indent should use tabs where possible #221: FILE: tools/mesh-gatt/onpowerup-model.c:85: + sprintf(s, "%s", "ON");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #221: FILE: tools/mesh-gatt/onpowerup-model.c:85: + sprintf(s, "%s", "ON");$ ERROR:CODE_INDENT: code indent should use tabs where possible #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){$ WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (16, 20) #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){ + sprintf(s, "%s", "RESUME"); ERROR:SPACING: space required before the open brace '{' #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){ ERROR:SPACING: space required after that close brace '}' #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){ ERROR:SPACING: space required before the open parenthesis '(' #222: FILE: tools/mesh-gatt/onpowerup-model.c:86: + }else if(data[0] == 2){ ERROR:CODE_INDENT: code indent should use tabs where possible #223: FILE: tools/mesh-gatt/onpowerup-model.c:87: + sprintf(s, "%s", "RESUME");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #223: FILE: tools/mesh-gatt/onpowerup-model.c:87: + sprintf(s, "%s", "RESUME");$ ERROR:CODE_INDENT: code indent should use tabs where possible #224: FILE: tools/mesh-gatt/onpowerup-model.c:88: + }else{$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #224: FILE: tools/mesh-gatt/onpowerup-model.c:88: + }else{$ WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (16, 20) #224: FILE: tools/mesh-gatt/onpowerup-model.c:88: + }else{ + sprintf(s, "%s", "?UNKNOWN"); ERROR:SPACING: space required before the open brace '{' #224: FILE: tools/mesh-gatt/onpowerup-model.c:88: + }else{ ERROR:SPACING: space required after that close brace '}' #224: FILE: tools/mesh-gatt/onpowerup-model.c:88: + }else{ ERROR:CODE_INDENT: code indent should use tabs where possible #225: FILE: tools/mesh-gatt/onpowerup-model.c:89: + sprintf(s, "%s", "?UNKNOWN");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #225: FILE: tools/mesh-gatt/onpowerup-model.c:89: + sprintf(s, "%s", "?UNKNOWN");$ ERROR:CODE_INDENT: code indent should use tabs where possible #226: FILE: tools/mesh-gatt/onpowerup-model.c:90: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #226: FILE: tools/mesh-gatt/onpowerup-model.c:90: + }$ WARNING:LONG_LINE: line length of 87 exceeds 80 columns #227: FILE: tools/mesh-gatt/onpowerup-model.c:91: + bt_shell_printf("Node %4.4x: OnPowerUp Status present = %s\n", src, s); ERROR:CODE_INDENT: code indent should use tabs where possible #227: FILE: tools/mesh-gatt/onpowerup-model.c:91: + bt_shell_printf("Node %4.4x: OnPowerUp Status present = %s\n", src, s);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #227: FILE: tools/mesh-gatt/onpowerup-model.c:91: + bt_shell_printf("Node %4.4x: OnPowerUp Status present = %s\n", src, s);$ ERROR:CODE_INDENT: code indent should use tabs where possible #228: FILE: tools/mesh-gatt/onpowerup-model.c:92: + break;$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #228: FILE: tools/mesh-gatt/onpowerup-model.c:92: + break;$ WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #252: FILE: tools/mesh-gatt/onpowerup-model.c:116: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc; WARNING:ARRAY_SIZE: Prefer ARRAY_SIZE(parms) #252: FILE: tools/mesh-gatt/onpowerup-model.c:116: + for (i = 0; i < sizeof(parms)/sizeof(parms[0]) && i < (unsigned) argc; WARNING:NAKED_SSCANF: unchecked sscanf return value #254: FILE: tools/mesh-gatt/onpowerup-model.c:118: + sscanf(argv[i], "%x", &parms[i]); WARNING:UNNECESSARY_ELSE: else is not generally useful after a break or return #273: FILE: tools/mesh-gatt/onpowerup-model.c:137: + return bt_shell_noninteractive_quit(EXIT_FAILURE); + } else { ERROR:CODE_INDENT: code indent should use tabs where possible #274: FILE: tools/mesh-gatt/onpowerup-model.c:138: + bt_shell_printf("Controlling OnPowerUp for node %4.4x\n", dst);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #274: FILE: tools/mesh-gatt/onpowerup-model.c:138: + bt_shell_printf("Controlling OnPowerUp for node %4.4x\n", dst);$ ERROR:CODE_INDENT: code indent should use tabs where possible #276: FILE: tools/mesh-gatt/onpowerup-model.c:140: + set_menu_prompt("OnPowerUp", argv[1]);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #276: FILE: tools/mesh-gatt/onpowerup-model.c:140: + set_menu_prompt("OnPowerUp", argv[1]);$ ERROR:SPACING: space required before the open parenthesis '(' #286: FILE: tools/mesh-gatt/onpowerup-model.c:150: + if(!node) ERROR:CODE_INDENT: code indent should use tabs where possible #292: FILE: tools/mesh-gatt/onpowerup-model.c:156: + target, power_onoff_app_idx, buf, len);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #292: FILE: tools/mesh-gatt/onpowerup-model.c:156: + target, power_onoff_app_idx, buf, len);$ ERROR:CODE_INDENT: code indent should use tabs where possible #308: FILE: tools/mesh-gatt/onpowerup-model.c:172: + if (!node){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #308: FILE: tools/mesh-gatt/onpowerup-model.c:172: + if (!node){$ ERROR:SPACING: space required before the open brace '{' #308: FILE: tools/mesh-gatt/onpowerup-model.c:172: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #308: FILE: tools/mesh-gatt/onpowerup-model.c:172: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #309: FILE: tools/mesh-gatt/onpowerup-model.c:173: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:CODE_INDENT: code indent should use tabs where possible #309: FILE: tools/mesh-gatt/onpowerup-model.c:173: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #309: FILE: tools/mesh-gatt/onpowerup-model.c:173: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #309: FILE: tools/mesh-gatt/onpowerup-model.c:173: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #310: FILE: tools/mesh-gatt/onpowerup-model.c:174: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #310: FILE: tools/mesh-gatt/onpowerup-model.c:174: + }$ ERROR:CODE_INDENT: code indent should use tabs where possible #312: FILE: tools/mesh-gatt/onpowerup-model.c:176: + n = mesh_opcode_set(OP_GENERIC_POWER_ONOFF_GET, msg);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #312: FILE: tools/mesh-gatt/onpowerup-model.c:176: + n = mesh_opcode_set(OP_GENERIC_POWER_ONOFF_GET, msg);$ ERROR:CODE_INDENT: code indent should use tabs where possible #315: FILE: tools/mesh-gatt/onpowerup-model.c:179: + bt_shell_printf("Failed to send \"GENERIC POWER ONOFF GET\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #315: FILE: tools/mesh-gatt/onpowerup-model.c:179: + bt_shell_printf("Failed to send \"GENERIC POWER ONOFF GET\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #335: FILE: tools/mesh-gatt/onpowerup-model.c:199: + if (!node){$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #335: FILE: tools/mesh-gatt/onpowerup-model.c:199: + if (!node){$ ERROR:SPACING: space required before the open brace '{' #335: FILE: tools/mesh-gatt/onpowerup-model.c:199: + if (!node){ WARNING:BRACES: braces {} are not necessary for single statement blocks #335: FILE: tools/mesh-gatt/onpowerup-model.c:199: + if (!node){ + bt_shell_printf("Warning: node %4.4x not found in database\n",target); + } WARNING:LONG_LINE: line length of 86 exceeds 80 columns #336: FILE: tools/mesh-gatt/onpowerup-model.c:200: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ERROR:CODE_INDENT: code indent should use tabs where possible #336: FILE: tools/mesh-gatt/onpowerup-model.c:200: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #336: FILE: tools/mesh-gatt/onpowerup-model.c:200: + bt_shell_printf("Warning: node %4.4x not found in database\n",target);$ ERROR:SPACING: space required after that ',' (ctx:VxV) #336: FILE: tools/mesh-gatt/onpowerup-model.c:200: + bt_shell_printf("Warning: node %4.4x not found in database\n",target); ^ ERROR:CODE_INDENT: code indent should use tabs where possible #337: FILE: tools/mesh-gatt/onpowerup-model.c:201: + }$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #337: FILE: tools/mesh-gatt/onpowerup-model.c:201: + }$ WARNING:LONG_LINE: line length of 90 exceeds 80 columns #340: FILE: tools/mesh-gatt/onpowerup-model.c:204: + parms[0] != 0 && parms[0] != 1 && parms[0] != 2) { ERROR:CODE_INDENT: code indent should use tabs where possible #340: FILE: tools/mesh-gatt/onpowerup-model.c:204: + parms[0] != 0 && parms[0] != 1 && parms[0] != 2) {$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #340: FILE: tools/mesh-gatt/onpowerup-model.c:204: + parms[0] != 0 && parms[0] != 1 && parms[0] != 2) {$ WARNING:LONG_LINE_STRING: line length of 86 exceeds 80 columns #341: FILE: tools/mesh-gatt/onpowerup-model.c:205: + bt_shell_printf("Bad arguments: Expecting \"0\" or \"1\" or \"2\"\n"); ERROR:CODE_INDENT: code indent should use tabs where possible #341: FILE: tools/mesh-gatt/onpowerup-model.c:205: + bt_shell_printf("Bad arguments: Expecting \"0\" or \"1\" or \"2\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #341: FILE: tools/mesh-gatt/onpowerup-model.c:205: + bt_shell_printf("Bad arguments: Expecting \"0\" or \"1\" or \"2\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #345: FILE: tools/mesh-gatt/onpowerup-model.c:209: + n = mesh_opcode_set(OP_GENERIC_POWER_ONOFF_SET, msg);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #345: FILE: tools/mesh-gatt/onpowerup-model.c:209: + n = mesh_opcode_set(OP_GENERIC_POWER_ONOFF_SET, msg);$ ERROR:CODE_INDENT: code indent should use tabs where possible #350: FILE: tools/mesh-gatt/onpowerup-model.c:214: + bt_shell_printf("Failed to send \"GENERIC POWER ONOFF SET\"\n");$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #350: FILE: tools/mesh-gatt/onpowerup-model.c:214: + bt_shell_printf("Failed to send \"GENERIC POWER ONOFF SET\"\n");$ ERROR:CODE_INDENT: code indent should use tabs where possible #358: FILE: tools/mesh-gatt/onpowerup-model.c:222: + .name = "power_onoff",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #358: FILE: tools/mesh-gatt/onpowerup-model.c:222: + .name = "power_onoff",$ ERROR:CODE_INDENT: code indent should use tabs where possible #359: FILE: tools/mesh-gatt/onpowerup-model.c:223: + .desc = "Power OnOff (OnPowerUp) Model Submenu",$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #359: FILE: tools/mesh-gatt/onpowerup-model.c:223: + .desc = "Power OnOff (OnPowerUp) Model Submenu",$ ERROR:CODE_INDENT: code indent should use tabs where possible #364: FILE: tools/mesh-gatt/onpowerup-model.c:228: + "Get OnPowerUp status"},$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #364: FILE: tools/mesh-gatt/onpowerup-model.c:228: + "Get OnPowerUp status"},$ ERROR:CODE_INDENT: code indent should use tabs where possible #365: FILE: tools/mesh-gatt/onpowerup-model.c:229: + {"set", "<0/1/2>",^I^I^Icmd_set,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #365: FILE: tools/mesh-gatt/onpowerup-model.c:229: + {"set", "<0/1/2>",^I^I^Icmd_set,$ WARNING:LONG_LINE: line length of 89 exceeds 80 columns #366: FILE: tools/mesh-gatt/onpowerup-model.c:230: + "Set OnPowerUp status (OFF/ON/RESTORE)"}, ERROR:CODE_INDENT: code indent should use tabs where possible #366: FILE: tools/mesh-gatt/onpowerup-model.c:230: + "Set OnPowerUp status (OFF/ON/RESTORE)"},$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #366: FILE: tools/mesh-gatt/onpowerup-model.c:230: + "Set OnPowerUp status (OFF/ON/RESTORE)"},$ ERROR:CODE_INDENT: code indent should use tabs where possible #379: FILE: tools/mesh-gatt/onpowerup-model.c:243: + if (!node_local_model_register(ele, GENERIC_POWER_ONOFF_CLIENT_MODEL_ID,$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #379: FILE: tools/mesh-gatt/onpowerup-model.c:243: + if (!node_local_model_register(ele, GENERIC_POWER_ONOFF_CLIENT_MODEL_ID,$ ERROR:CODE_INDENT: code indent should use tabs where possible #383: FILE: tools/mesh-gatt/onpowerup-model.c:247: + bt_shell_add_submenu(&power_onoff_menu);$ WARNING:LEADING_SPACE: please, no spaces at the start of a line #383: FILE: tools/mesh-gatt/onpowerup-model.c:247: + bt_shell_add_submenu(&power_onoff_menu);$ WARNING:LONG_LINE_STRING: line length of 86 exceeds 80 columns #431: FILE: tools/meshctl.c:2008: + g_printerr("Failed to initialize mesh generic power On/Off client\n"); /github/workspace/src/12662893.patch total: 61 errors, 66 warnings, 315 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile /github/workspace/src/12662893.patch has style problems, please review. NOTE: Ignored message types: COMMIT_MESSAGE COMPLEX_MACRO CONST_STRUCT FILE_PATH_CHANGES MISSING_SIGN_OFF PREFER_PACKED SPDX_LICENSE_TAG SPLIT_STRING SSCANF_TO_KSTRTO NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. ############################## Test: GitLint - FAIL Desc: Run gitlint with rule in .gitlint Output: [BlueZ,4/6] tools/mesh-gatt: Add subscription delete message to config client model 1: T1 Title exceeds max length (83>80): "[BlueZ,4/6] tools/mesh-gatt: Add subscription delete message to config client model" --- Regards, Linux Bluetooth

Message ID	20211207225604.35156-2-daniele.biagetti@cblelectronics.com
State	New
Headers	show Return-Path: <linux-bluetooth-owner@kernel.org> From: Daniele Biagetti <dbiagio79@gmail.com> To: linux-bluetooth@vger.kernel.org Cc: Daniele Biagetti <daniele.biagetti@cblelectronics.com> Subject: [PATCH BlueZ 1/6] tools/mesh-gatt: Add onoff set unack message to onoff client model Date: Tue, 7 Dec 2021 23:55:59 +0100 Message-Id: <20211207225604.35156-2-daniele.biagetti@cblelectronics.com> In-Reply-To: <20211207225604.35156-1-daniele.biagetti@cblelectronics.com> References: <20211207225604.35156-1-daniele.biagetti@cblelectronics.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	tools/mesh-gatt meshctl tool improvements \| expand [BlueZ,0/6] tools/mesh-gatt meshctl tool improvements [BlueZ,1/6] tools/mesh-gatt: Add onoff set unack message to onoff client model [BlueZ,2/6] tools/mesh-gatt: Fix status messages processing [BlueZ,3/6] tools/mesh-gatt: Fix unwanted return in onoff client model [BlueZ,4/6] tools/mesh-gatt: Add subscription delete message to config client model [BlueZ,5/6] tools/mesh-gatt: Add generic level model support [BlueZ,6/6] tools/mesh-gatt: Add generic power onoff client model

[BlueZ,1/6] tools/mesh-gatt: Add onoff set unack message to onoff client model

Commit Message

Comments

Patch