| Message ID | 20250201-rb1-bt-v1-0-ae896c4923d8@linaro.org |
|---|---|
| Headers | show |
| Series | Bluetooth: qca: add Qualcomm WCN3950 BT/WiFi chip support | expand |
On Sat, Feb 01, 2025 at 04:19:01PM +0100, Konrad Dybcio wrote: > On 1.02.2025 10:18 AM, Dmitry Baryshkov wrote: > > On QCM2290-based devices the SE3 is used for the Bluetooth chips. Add > > corresponding device node. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/qcm2290.dtsi | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi > > index f0746123e594d5ce5cc314c956eaca11556a9211..5f92eb16482a0ea5f8436cfa7e55849f171ebd24 100644 > > --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi > > +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi > > @@ -1239,6 +1239,21 @@ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, > > status = "disabled"; > > }; > > > > + uart3: serial@4a8c000 { > > + compatible = "qcom,geni-uart"; > > + reg = <0x0 0x04a8c000 0x0 0x4000>; > > + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; > > + clock-names = "se"; > > + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG > > + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, > > + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG > > + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; > > This path doesn't look quite right.. there'MASTER_APPSS_PROC is only > on one of these. Hmm. I should check my c&p source then. > > + RPM_ACTIVE_TAG > > Konrad
Qualcomm Robotics RB1 platform uses a new member of the WCN39xx family of BT/WiFi chips. Add support for this member of the family and enable it to be used on the RB1 board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- Dmitry Baryshkov (4): dt-bindings: net: bluetooth: qualcomm: document WCN3950 Bluetooth: qca: add WCN3950 support arm64: dts: qcom: qcm2290: add UART3 device arm64: dts: qcom: qrb2210-rb1: add Bluetooth support .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + arch/arm64/boot/dts/qcom/qcm2290.dtsi | 15 ++++ arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 81 ++++++++++++++++++++++ drivers/bluetooth/btqca.c | 9 +++ drivers/bluetooth/btqca.h | 1 + drivers/bluetooth/hci_qca.c | 25 +++++++ 6 files changed, 133 insertions(+) --- base-commit: 88b6bfc04cc5f60ce79c25cd27fe83f7fb4468bf change-id: 20250201-rb1-bt-cec7a314991d Best regards,