mbox series

[v4,0/4] Enable Bluetooth on qcs6490-rb3gen2 board

Message ID 20241204131706.20791-1-quic_janathot@quicinc.com
Headers show
Series Enable Bluetooth on qcs6490-rb3gen2 board | expand

Message

Janaki Ramaiah Thota Dec. 4, 2024, 1:17 p.m. UTC 
- Patch 1/4 Add description of the PMU of the WCN6750 module.
- Patch 2/4 add and enable BT node for qcs6490-rb3gen board.
- Patch 3/4 use the power sequencer for wcn6750.
- Patch 4/4 add support for the WCN6750 PMU.

----
Changes from v3:
* Defined the PMU node and used the its output to power up BT
* Used power sequencer for wcn wcn6750 module
* Split the patch to multiple as per subtree
* Add description of the PMU of the WCN6750 module
* Include separate UART state node for sleep pin configuarion
* Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/
Changes from v2:
* Sorted nodes alphabetically
* Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/
Changes from v1:
* Corrected the board name in subject
* Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/
Janaki Ramaiah Thota (4):
  regulator:·dt-bindings:·qcom,qca6390-pmu:·document wcn6750-pmu
  arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node
  Bluetooth: hci_qca: use the power sequencer for wcn6750
  power: sequencing: qcom-wcn: add support for the WCN6750 PMU

 .../bindings/regulator/qcom,qca6390-pmu.yaml  |  27 +++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  | 165 +++++++++++++++++-
 drivers/bluetooth/hci_qca.c                   |   2 +-
 drivers/power/sequencing/pwrseq-qcom-wcn.c    |  22 +++
 4 files changed, 214 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Dec. 5, 2024, 8:06 a.m. UTC | #1 
On Wed, Dec 04, 2024 at 06:47:03PM +0530, Janaki Ramaiah Thota wrote:
> Add description of the PMU of the WCN6750 module.
> 
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>

Subject is mangled.

What's more, you received a *very clear* instruction what to do on your
previous v4. This is also v4, but that's not the point. Why you ignored
the instruction?

Instruction is there because "many review tags are being ignored" and,
well, did not help! I don't know how to write it clearer.

Best regards,
Krzysztof