diff mbox series

[v2,5/9] dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM

Message ID T-ZqipM8xIaRroty0k9MEPCfD31BvtDXY6IaSm8uCD_ffIgJKYAcY-EZ49w0S-uX0w9sn1mUfBALTv0SqOb7OM1Uh6pskewGKxkOFYRJwfM=@protonmail.com
State Accepted
Commit 3e1fac9324f8feaeffc724fd9aca7709caa6d3cc
Headers show
Series [v2,1/9] dt-bindings: clk: qcom: msm8996-apcc: Add CBF | expand

Commit Message

Yassine Oudjana April 9, 2022, 4:17 a.m. UTC
qcom-cpufreq-nvmem no longer uses SMEM. Remove all references
to SMEM and change the description and maximum value of
opp-supported-hw to reflect the new set of possible values.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 .../bindings/opp/opp-v2-kryo-cpu.yaml         | 56 +++++++++----------
 1 file changed, 26 insertions(+), 30 deletions(-)

--
2.35.1

Comments

Rob Herring (Arm) April 26, 2022, 6:52 p.m. UTC | #1
On Sat, 09 Apr 2022 04:17:35 +0000, Yassine Oudjana wrote:
> qcom-cpufreq-nvmem no longer uses SMEM. Remove all references
> to SMEM and change the description and maximum value of
> opp-supported-hw to reflect the new set of possible values.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> ---
>  .../bindings/opp/opp-v2-kryo-cpu.yaml         | 56 +++++++++----------
>  1 file changed, 26 insertions(+), 30 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Viresh Kumar April 27, 2022, 3:21 a.m. UTC | #2
On 09-04-22, 04:17, Yassine Oudjana wrote:
> qcom-cpufreq-nvmem no longer uses SMEM. Remove all references
> to SMEM and change the description and maximum value of
> opp-supported-hw to reflect the new set of possible values.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> ---
>  .../bindings/opp/opp-v2-kryo-cpu.yaml         | 56 +++++++++----------
>  1 file changed, 26 insertions(+), 30 deletions(-)

Applied. Thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
index 8c2e9ac5f68d..30f7b596d609 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -17,10 +17,10 @@  description: |
   the CPU frequencies subset and voltage value of each OPP varies based on
   the silicon variant in use.
   Qualcomm Technologies, Inc. Process Voltage Scaling Tables
-  defines the voltage and frequency value based on the msm-id in SMEM
-  and speedbin blown in the efuse combination.
-  The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
-  to provide the OPP framework with required information (existing HW bitmap).
+  defines the voltage and frequency value based on the speedbin blown in
+  the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
+  the OPP framework with required information (existing HW bitmap).
   This is used to determine the voltage and frequency value for each OPP of
   operating-points-v2 table when it is parsed by the OPP framework.

@@ -50,15 +50,11 @@  patternProperties:
         description: |
           A single 32 bit bitmap value, representing compatible HW.
           Bitmap:
-          0:  MSM8996 V3, speedbin 0
-          1:  MSM8996 V3, speedbin 1
-          2:  MSM8996 V3, speedbin 2
-          3:  unused
-          4:  MSM8996 SG, speedbin 0
-          5:  MSM8996 SG, speedbin 1
-          6:  MSM8996 SG, speedbin 2
-          7-31:  unused
-        maximum: 0x77
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3-31:  unused
+        maximum: 0x7

       clock-latency-ns: true

@@ -184,19 +180,19 @@  examples:
             opp-307200000 {
                 opp-hz = /bits/ 64 <307200000>;
                 opp-microvolt = <905000 905000 1140000>;
-                opp-supported-hw = <0x77>;
+                opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
             };
-            opp-1593600000 {
-                opp-hz = /bits/ 64 <1593600000>;
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
                 opp-microvolt = <1140000 905000 1140000>;
-                opp-supported-hw = <0x71>;
+                opp-supported-hw = <0x5>;
                 clock-latency-ns = <200000>;
             };
-            opp-2188800000 {
-                opp-hz = /bits/ 64 <2188800000>;
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
                 opp-microvolt = <1140000 905000 1140000>;
-                opp-supported-hw = <0x10>;
+                opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
             };
         };
@@ -209,25 +205,25 @@  examples:
             opp-307200000 {
                 opp-hz = /bits/ 64 <307200000>;
                 opp-microvolt = <905000 905000 1140000>;
-                opp-supported-hw = <0x77>;
+                opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
             };
-            opp-1593600000 {
-                opp-hz = /bits/ 64 <1593600000>;
+            opp-1804800000 {
+                opp-hz = /bits/ 64 <1804800000>;
                 opp-microvolt = <1140000 905000 1140000>;
-                opp-supported-hw = <0x70>;
+                opp-supported-hw = <0x6>;
                 clock-latency-ns = <200000>;
             };
-            opp-2150400000 {
-                opp-hz = /bits/ 64 <2150400000>;
+            opp-1900800000 {
+                opp-hz = /bits/ 64 <1900800000>;
                 opp-microvolt = <1140000 905000 1140000>;
-                opp-supported-hw = <0x31>;
+                opp-supported-hw = <0x4>;
                 clock-latency-ns = <200000>;
             };
-            opp-2342400000 {
-                opp-hz = /bits/ 64 <2342400000>;
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
                 opp-microvolt = <1140000 905000 1140000>;
-                opp-supported-hw = <0x10>;
+                opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
             };
         };