diff mbox series

[v2,3/5] arm64: dts: qcom: sc8280xp: Add EL2 overlay for WoA devices

Message ID 20250503-sc-el2-overlays-v2-3-24e9b4572e15@trvn.ru
State New
Headers show
Series None | expand

Commit Message

Nikita Travkin May 3, 2025, 10:39 a.m. UTC 
WoA devices using sc8280xp use android firmware to boot, which notably
includes QHEE hypervisor. This means that, so far, Linux-based OS could
only boot in EL1 on those devices.

However Windows can replace QHEE upon boot with it's own hypervisor, and
with the use of tools such as "slbounce", it's possible to do the same
for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of QHEE services.

Add a EL2-specific DT overlay and apply it to sc8280xp WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 arch/arm64/boot/dts/qcom/Makefile          | 15 ++++++----
 arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso | 44 ++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 06da6f6791d69f56bafc3dad3e721c9ff2a1a68a..12d9ed1129b4e83146e561910aca9fc3718b0820 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -205,11 +205,16 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb
+sc8280xp-crd-el2-dtbs	:= sc8280xp-crd.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb sc8280xp-crd-el2.dtb
+sc8280xp-huawei-gaokun3-el2-dtbs	:= sc8280xp-huawei-gaokun3.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb sc8280xp-huawei-gaokun3-el2.dtb
+sc8280xp-lenovo-thinkpad-x13s-el2-dtbs	:= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-lenovo-thinkpad-x13s-el2.dtb
+sc8280xp-microsoft-arcata-el2-dtbs	:= sc8280xp-microsoft-arcata.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb sc8280xp-microsoft-arcata-el2.dtb
+sc8280xp-microsoft-blackrock-el2-dtbs	:= sc8280xp-microsoft-blackrock.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb sc8280xp-microsoft-blackrock-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..25d1fa4bc2055e67db0508aa09c8a8bd7fa01687
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc8280xp specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu {
+	zap-shader {
+		status = "disabled";
+	};
+};
+
+/*
+ * When running under QHEE, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ */
+&pcie2a {
+	iommu-map = <0 &pcie_smmu 0x20000 0x10000>;
+};
+
+&pcie2b {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+};
+
+&pcie3a {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie3b {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};