diff mbox series

[v3,5/5] arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support

Message ID 20250423063054.28795-6-quic_kaushalk@quicinc.com
State New
Headers show
Series Enable QPIC BAM and QPIC NAND support for SDX75 | expand

Commit Message

Kaushal Kumar April 23, 2025, 6:30 a.m. UTC 
Enable QPIC BAM and QPIC NAND devicetree nodes for Qualcomm SDX75-IDP
board.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75-idp.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index f1bbe7ab01ab..06cacec3461f 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -278,6 +278,24 @@ 
 	vdd3-supply = <&vreg_l10b_3p08>;
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x680000 0xb00000>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };