diff mbox series

[v3,5/6] ASoC: codecs: wcd938x: add mux control support for hp audio mux

Message ID 20250324110606.32001-6-srinivas.kandagatla@linaro.org
State New
Headers show
Series ASoC: wcd938x: enable t14s audio headset | expand

Commit Message

Srinivas Kandagatla March 24, 2025, 11:06 a.m. UTC 
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

On some platforms to minimise pop and click during switching between
CTIA and OMTP headset an additional HiFi mux is used. Most common
case is that this switch is switched on by default, but on some
platforms this needs a regulator enable.

move to using mux control to enable both regulator and handle gpios,
deprecate the usage of gpio.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
---
 sound/soc/codecs/Kconfig   |  1 +
 sound/soc/codecs/wcd938x.c | 38 ++++++++++++++++++++++++++++++--------
 2 files changed, 31 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ee35f3aa5521..a2829d76e108 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -2226,6 +2226,7 @@  config SND_SOC_WCD938X
 	tristate
 	depends on SOUNDWIRE || !SOUNDWIRE
 	select SND_SOC_WCD_CLASSH
+	select MULTIPLEXER
 
 config SND_SOC_WCD938X_SDW
 	tristate "WCD9380/WCD9385 Codec - SDW"
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
index dfaa3de31164..948b5f6cc45a 100644
--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -19,6 +19,7 @@ 
 #include <linux/regmap.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
+#include <linux/mux/consumer.h>
 #include <linux/regulator/consumer.h>
 
 #include "wcd-clsh-v2.h"
@@ -178,6 +179,8 @@  struct wcd938x_priv {
 	int variant;
 	int reset_gpio;
 	struct gpio_desc *us_euro_gpio;
+	struct mux_control *us_euro_mux;
+	u32 mux_state;
 	u32 micb1_mv;
 	u32 micb2_mv;
 	u32 micb3_mv;
@@ -3243,9 +3246,16 @@  static bool wcd938x_swap_gnd_mic(struct snd_soc_component *component)
 
 	wcd938x = snd_soc_component_get_drvdata(component);
 
-	value = gpiod_get_value(wcd938x->us_euro_gpio);
+	if (!wcd938x->us_euro_mux) {
+		value = gpiod_get_value(wcd938x->us_euro_gpio);
 
-	gpiod_set_value(wcd938x->us_euro_gpio, !value);
+		gpiod_set_value(wcd938x->us_euro_gpio, !value);
+	} else {
+		mux_control_deselect(wcd938x->us_euro_mux);
+		wcd938x->mux_state = !wcd938x->mux_state;
+		if (mux_control_select(wcd938x->us_euro_mux, wcd938x->mux_state))
+			dev_err(component->dev, "Unable to select us/euro mux state\n");
+	}
 
 	return true;
 }
@@ -3261,14 +3271,23 @@  static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
 		return dev_err_probe(dev, wcd938x->reset_gpio,
 				     "Failed to get reset gpio\n");
 
-	wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
-						GPIOD_OUT_LOW);
-	if (IS_ERR(wcd938x->us_euro_gpio))
-		return dev_err_probe(dev, PTR_ERR(wcd938x->us_euro_gpio),
-				     "us-euro swap Control GPIO not found\n");
+	wcd938x->us_euro_mux = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(wcd938x->us_euro_mux)) {
+		if (PTR_ERR(wcd938x->us_euro_mux) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		/* mux is optional and now fallback to using gpio */
+		wcd938x->us_euro_mux = NULL;
+		wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro", GPIOD_OUT_LOW);
+		if (IS_ERR(wcd938x->us_euro_gpio))
+			return dev_err_probe(dev, PTR_ERR(wcd938x->us_euro_gpio),
+					     "us-euro swap Control GPIO not found\n");
+	} else {
+		if (mux_control_select(wcd938x->us_euro_mux, wcd938x->mux_state))
+			dev_err(dev, "Unable to select us/euro mux state\n");
+	}
 
 	cfg->swap_gnd_mic = wcd938x_swap_gnd_mic;
-
 	wcd938x->supplies[0].supply = "vdd-rxtx";
 	wcd938x->supplies[1].supply = "vdd-io";
 	wcd938x->supplies[2].supply = "vdd-buck";
@@ -3581,6 +3600,9 @@  static void wcd938x_remove(struct platform_device *pdev)
 	pm_runtime_set_suspended(dev);
 	pm_runtime_dont_use_autosuspend(dev);
 
+	if (wcd938x->us_euro_mux)
+		mux_control_deselect(wcd938x->us_euro_mux);
+
 	regulator_bulk_disable(WCD938X_MAX_SUPPLY, wcd938x->supplies);
 	regulator_bulk_free(WCD938X_MAX_SUPPLY, wcd938x->supplies);
 }