@@ -12,6 +12,8 @@
#include "pm8226.dtsi"
/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
/delete-node/ &smem_region;
/ {
@@ -8,6 +8,8 @@
#include "pm8226.dtsi"
/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
/delete-node/ &smem_region;
/ {
@@ -145,12 +147,12 @@ framebuffer@3200000 {
no-map;
};
- mpss@8400000 {
+ mpss_region: mpss@8400000 {
reg = <0x08400000 0x1f00000>;
no-map;
};
- mba@a300000 {
+ mba_region: mba@a300000 {
reg = <0x0a300000 0x100000>;
no-map;
};
@@ -213,6 +213,18 @@ smem_region: smem@3000000 {
no-map;
};
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x5100000>;
+ no-map;
+ status = "disabled";
+ };
+
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x100000>;
+ no-map;
+ status = "disabled";
+ };
+
adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
@@ -253,6 +265,31 @@ adsp_smp2p_in: slave-kernel {
};
};
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smsm {
compatible = "qcom,smsm";
#address-cells = <1>;
@@ -879,6 +916,51 @@ spmi_bus: spmi@fc4cf000 {
#interrupt-cells = <4>;
};
+ modem: remoteproc@fc880000 {
+ compatible = "qcom,msm8226-mss-pil";
+ reg = <0xfc880000 0x100>,
+ <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ power-domains = <&rpmpd MSM8226_VDDCX>;
+ power-domain-names = "cx";
+
+ qcom,ext-bhs-reg = <&tcsr_regs_1 0x194>;
+ qcom,halt-regs = <&tcsr_regs_1 0x180 0x200 0x280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ memory-region = <&mba_region>, <&mpss_region>;
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
@@ -9,6 +9,8 @@
#include "pm8226.dtsi"
/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
/delete-node/ &smem_region;
/ {