@@ -125,12 +125,25 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
struct arm_smmu_domain *smmu_domain = (void *)cookie;
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
struct arm_smmu_device *smmu = smmu_domain->smmu;
- u32 reg = 0;
+ u32 reg = 0, sctlr;
+ unsigned long flags;
if (terminate)
reg |= ARM_SMMU_RESUME_TERMINATE;
+ spin_lock_irqsave(&smmu_domain->stall_lock, flags);
+
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
+
+ /*
+ * Re-enable interrupts after they were disabled by
+ * arm_smmu_context_fault().
+ */
+ sctlr = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_SCTLR);
+ sctlr |= ARM_SMMU_SCTLR_CFIE;
+ arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_SCTLR, sctlr);
+
+ spin_unlock_irqrestore(&smmu_domain->stall_lock, flags);
}
static void qcom_adreno_smmu_set_prr_bit(const void *cookie, bool set)
@@ -457,12 +457,43 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
DEFAULT_RATELIMIT_BURST);
int idx = smmu_domain->cfg.cbndx;
int ret;
+ unsigned long flags;
arm_smmu_read_context_fault_info(smmu, idx, &cfi);
if (!(cfi.fsr & ARM_SMMU_CB_FSR_FAULT))
return IRQ_NONE;
+ /*
+ * On some implementations FSR.SS asserts a context fault
+ * interrupt. We do not want this behavior, because resolving the
+ * original context fault typically requires operations that cannot be
+ * performed in IRQ context but leaving the stall unacknowledged will
+ * immediately lead to another spurious interrupt as FSR.SS is still
+ * set. Work around this by disabling interrupts for this context bank.
+ * It's expected that interrupts are re-enabled after resuming the
+ * translation.
+ *
+ * We have to do this before report_iommu_fault() so that we don't
+ * leave interrupts disabled in case the downstream user decides the
+ * fault can be resolved inside its fault handler.
+ *
+ * There is a possible race if there are multiple context banks sharing
+ * the same interrupt and both signal an interrupt in between writing
+ * RESUME and SCTLR. We could disable interrupts here before we
+ * re-enable them in the resume handler, leaving interrupts enabled.
+ * Lock the write to serialize it with the resume handler.
+ */
+ if (cfi.fsr & ARM_SMMU_CB_FSR_SS) {
+ u32 val;
+
+ spin_lock_irqsave(&smmu_domain->stall_lock, flags);
+ val = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_SCTLR);
+ val &= ~ARM_SMMU_SCTLR_CFIE;
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, val);
+ spin_unlock_irqrestore(&smmu_domain->stall_lock, flags);
+ }
+
ret = report_iommu_fault(&smmu_domain->domain, NULL, cfi.iova,
cfi.fsynr & ARM_SMMU_CB_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
@@ -921,6 +952,7 @@ static struct iommu_domain *arm_smmu_domain_alloc_paging(struct device *dev)
mutex_init(&smmu_domain->init_mutex);
spin_lock_init(&smmu_domain->cb_lock);
+ spin_lock_init(&smmu_domain->stall_lock);
return &smmu_domain->domain;
}
@@ -216,7 +216,6 @@ enum arm_smmu_cbar_type {
ARM_SMMU_CB_FSR_TLBLKF)
#define ARM_SMMU_CB_FSR_FAULT (ARM_SMMU_CB_FSR_MULTI | \
- ARM_SMMU_CB_FSR_SS | \
ARM_SMMU_CB_FSR_UUT | \
ARM_SMMU_CB_FSR_EF | \
ARM_SMMU_CB_FSR_PF | \
@@ -384,6 +383,7 @@ struct arm_smmu_domain {
enum arm_smmu_domain_stage stage;
struct mutex init_mutex; /* Protects smmu pointer */
spinlock_t cb_lock; /* Serialises ATS1* ops and TLB syncs */
+ spinlock_t stall_lock;
struct iommu_domain domain;
};
On some SMMUv2 implementations, including MMU-500, SMMU_CBn_FSR.SS asserts an interrupt. The only way to clear that bit is to resume the transaction by writing SMMU_CBn_RESUME, but typically resuming the transaction requires complex operations (copying in pages, etc.) that can't be done in IRQ context. drm/msm already has a problem, because its fault handler sometimes schedules a job to dump the GPU state and doesn't resume translation until this is complete. Work around this by disabling context fault interrupts until after the transaction is resumed. Because other context banks can share an IRQ line, we may still get an interrupt intended for another context bank, but in this case only SMMU_CBn_FSR.SS will be asserted and we can skip it assuming that interrupts are disabled which is accomplished by removing the bit from ARM_SMMU_CB_FSR_FAULT. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 15 +++++++++++++- drivers/iommu/arm/arm-smmu/arm-smmu.c | 32 ++++++++++++++++++++++++++++++ drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 +- 3 files changed, 47 insertions(+), 2 deletions(-)