From patchwork Mon Nov 25 05:07:24 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manikanta Mylavarapu X-Patchwork-Id: 845411 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2278014F9D9; Mon, 25 Nov 2024 05:08:22 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732511304; cv=none; b=aIqZFwdnN8aj4MIUKWyJ/EAE0bkKhPMwp56CBeN6k/NFSosEVXObodNV6ORZq48QSMZbdzBzK9nNJ43l9ooHYtndntsvRMnMIlAprXi7cPufZFMm4tmihwn3jzYn5AOqO/GK/qQUvWaho3+wBr55IvT3rFWwRdQceHt5cwiMOwI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1732511304; c=relaxed/simple; bh=f7ZO31bml7UmbTDWrDyhlhgBd8y9Q4XYoJjjo8lhP+8=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=jxfv7XRzBR0/dgn8LeAK/xW21aow9oMp2dYzR+tMf/cTyfgOuwBOIumyIG1zU62PmupqaFy7dxA2fcPVMP1yhcsgfaye6dB6Pokophq0epfJuvt2UiWYPiHjFX5B2CFnWIu7lVddbxTf0Dp2gimjV6oTvDe3Q0yUqo9UV1Rcq0I= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=HM2kGpMc; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="HM2kGpMc" Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4AOMaXOq021290; Mon, 25 Nov 2024 05:08:14 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= cKNwfftnrb+XITN+CMwEFX8m2I1ToBKvQgKF60Duc90=; b=HM2kGpMcbZhea7lh sGsm8Gx+NN3Hq+bzOxxmOiDei+PHHE/ZGxaRqVyU0Q35AWnaVzQ1zmZRFwLovKGl cbA8MZwZnjlw+BEwPZjaNveXQf63eudCufu8xfSsCoAADldPII8Db2jN7WT5Kjeu VhP04N0fCUJbUp+lxK5I1m5wah/DRpiX5t/KpolDDlj76M7lUfFs2q83L0SR4GYO r/oRNlKMq+mwcO+PVctCjvFB2iekny97xvyXJecaWe7VMeP1irWDLrH/nJZlXfRg tZlmU/XgsS2nd/LVjH82LJ0WumYR1T6oMxXkXlhdGE7RetwTVJgj312ypPVHnB8B ABr6vg== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4337tjbb2r-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 25 Nov 2024 05:08:13 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4AP58CfD004747 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 25 Nov 2024 05:08:12 GMT Received: from hu-mmanikan-blr.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 24 Nov 2024 21:08:07 -0800 From: Manikanta Mylavarapu To: , , , , , , , , , , , , , , , CC: , Subject: [PATCH v9 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2 Date: Mon, 25 Nov 2024 10:37:24 +0530 Message-ID: <20241125050728.3699241-4-quic_mmanikan@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241125050728.3699241-1-quic_mmanikan@quicinc.com> References: <20241125050728.3699241-1-quic_mmanikan@quicinc.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: hU_53BWO4M_vjmYIQC4EHzqi7smE4LBi X-Proofpoint-ORIG-GUID: hU_53BWO4M_vjmYIQC4EHzqi7smE4LBi X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 clxscore=1015 impostorscore=0 priorityscore=1501 suspectscore=0 phishscore=0 spamscore=0 bulkscore=0 mlxlogscore=999 adultscore=0 mlxscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2411250041 From: Praveenkumar I SoCs without RPM need to enable sensors and calibrate them from the kernel. The IPQ5332 and IPQ5424 use the tsens v2.3.3 IP and do not have RPM. Therefore, add a new calibration function for V2, as the tsens.c calib function only supports V1. Also add new feature_config, ops and data for IPQ5332, IPQ5424. Although the TSENS IP supports 16 sensors, not all are used. The hw_id is used to enable the relevant sensors. Signed-off-by: Praveenkumar I Signed-off-by: Manikanta Mylavarapu --- Changes in V9: - Update variable declaration order in tsens_v2_calibrate_sensor() - Replace tab with space during the 'val' computation in the tsens_v2_calibrate_sensor() - Update 'RSEULT_FORMAT_TEMP' to 'RESULT_FORMAT_TEMP' drivers/thermal/qcom/tsens-v2.c | 178 ++++++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens.c | 8 +- drivers/thermal/qcom/tsens.h | 4 +- 3 files changed, 188 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c index 0cb7301eca6e..836155fa9ab2 100644 --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -4,13 +4,32 @@ * Copyright (c) 2018, Linaro Limited */ +#include #include #include +#include #include "tsens.h" /* ----- SROT ------ */ #define SROT_HW_VER_OFF 0x0000 #define SROT_CTRL_OFF 0x0004 +#define SROT_MEASURE_PERIOD 0x0008 +#define SROT_Sn_CONVERSION 0x0060 +#define V2_SHIFT_DEFAULT 0x0003 +#define V2_SLOPE_DEFAULT 0x0cd0 +#define V2_CZERO_DEFAULT 0x016a +#define ONE_PT_SLOPE 0x0cd0 +#define TWO_PT_SHIFTED_GAIN 921600 +#define ONE_PT_CZERO_CONST 94 +#define SW_RST_DEASSERT 0x0 +#define SW_RST_ASSERT 0x1 +#define MEASURE_PERIOD_2mSEC 0x1 +#define RESULT_FORMAT_TEMP 0x1 +#define TSENS_ENABLE 0x1 +#define SENSOR_CONVERSION(n) (((n) * 4) + SROT_Sn_CONVERSION) +#define CONVERSION_SHIFT_MASK GENMASK(24, 23) +#define CONVERSION_SLOPE_MASK GENMASK(22, 10) +#define CONVERSION_CZERO_MASK GENMASK(9, 0) /* ----- TM ------ */ #define TM_INT_EN_OFF 0x0004 @@ -50,6 +69,17 @@ static struct tsens_features ipq8074_feat = { .trip_max_temp = 204000, }; +static struct tsens_features ipq5332_feat = { + .ver_major = VER_2_X_NO_RPM, + .crit_int = 1, + .combo_int = 1, + .adc = 0, + .srot_split = 1, + .max_sensors = 16, + .trip_min_temp = 0, + .trip_max_temp = 204000, +}; + static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { /* ----- SROT ------ */ /* VERSION */ @@ -59,6 +89,10 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { /* CTRL_OFF */ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 18), + [CODE_OR_TEMP] = REG_FIELD(SROT_CTRL_OFF, 21, 21), + + [MAIN_MEASURE_PERIOD] = REG_FIELD(SROT_MEASURE_PERIOD, 0, 7), /* ----- TM ------ */ /* INTERRUPT ENABLE */ @@ -104,6 +138,128 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), }; +static int tsens_v2_calibrate_sensor(struct device *dev, struct tsens_sensor *sensor, + struct regmap *map, u32 mode, u32 base0, u32 base1) +{ + u32 shift = V2_SHIFT_DEFAULT; + u32 slope = V2_SLOPE_DEFAULT; + u32 czero = V2_CZERO_DEFAULT; + char name[20]; + u32 val; + int ret; + + /* Read offset value */ + ret = snprintf(name, sizeof(name), "tsens_sens%d_off", sensor->hw_id); + if (ret < 0) + return ret; + + ret = nvmem_cell_read_variable_le_u32(dev, name, &sensor->offset); + if (ret) + return ret; + + /* Based on calib mode, program SHIFT, SLOPE and CZERO */ + switch (mode) { + case TWO_PT_CALIB: + slope = (TWO_PT_SHIFTED_GAIN / (base1 - base0)); + + czero = (base0 + sensor->offset - ((base1 - base0) / 3)); + + break; + case ONE_PT_CALIB2: + czero = base0 + sensor->offset - ONE_PT_CZERO_CONST; + + slope = ONE_PT_SLOPE; + + break; + default: + dev_dbg(dev, "calibrationless mode\n"); + } + + val = FIELD_PREP(CONVERSION_SHIFT_MASK, shift) | + FIELD_PREP(CONVERSION_SLOPE_MASK, slope) | + FIELD_PREP(CONVERSION_CZERO_MASK, czero); + + regmap_write(map, SENSOR_CONVERSION(sensor->hw_id), val); + + return 0; +} + +static int tsens_v2_calibration(struct tsens_priv *priv) +{ + struct device *dev = priv->dev; + u32 mode, base0, base1; + int i, ret; + + if (priv->num_sensors > MAX_SENSORS) + return -EINVAL; + + ret = nvmem_cell_read_variable_le_u32(priv->dev, "mode", &mode); + if (ret == -ENOENT) + dev_warn(priv->dev, "Calibration data not present in DT\n"); + if (ret < 0) + return ret; + + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + ret = nvmem_cell_read_variable_le_u32(priv->dev, "base0", &base0); + if (ret < 0) + return ret; + + ret = nvmem_cell_read_variable_le_u32(priv->dev, "base1", &base1); + if (ret < 0) + return ret; + + /* Calibrate each sensor */ + for (i = 0; i < priv->num_sensors; i++) { + ret = tsens_v2_calibrate_sensor(dev, &priv->sensor[i], priv->srot_map, + mode, base0, base1); + if (ret < 0) + return ret; + } + + return 0; +} + +static int __init init_tsens_v2_no_rpm(struct tsens_priv *priv) +{ + struct device *dev = priv->dev; + int i, ret; + u32 val = 0; + + ret = init_common(priv); + if (ret < 0) + return ret; + + priv->rf[CODE_OR_TEMP] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[CODE_OR_TEMP]); + if (IS_ERR(priv->rf[CODE_OR_TEMP])) + return PTR_ERR(priv->rf[CODE_OR_TEMP]); + + priv->rf[MAIN_MEASURE_PERIOD] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[MAIN_MEASURE_PERIOD]); + if (IS_ERR(priv->rf[MAIN_MEASURE_PERIOD])) + return PTR_ERR(priv->rf[MAIN_MEASURE_PERIOD]); + + regmap_field_write(priv->rf[TSENS_SW_RST], SW_RST_ASSERT); + + regmap_field_write(priv->rf[MAIN_MEASURE_PERIOD], MEASURE_PERIOD_2mSEC); + + /* Enable available sensors */ + for (i = 0; i < priv->num_sensors; i++) + val |= 1 << priv->sensor[i].hw_id; + + regmap_field_write(priv->rf[SENSOR_EN], val); + + /* Select temperature format, unit is deci-Celsius */ + regmap_field_write(priv->rf[CODE_OR_TEMP], RESULT_FORMAT_TEMP); + + regmap_field_write(priv->rf[TSENS_SW_RST], SW_RST_DEASSERT); + + regmap_field_write(priv->rf[TSENS_EN], TSENS_ENABLE); + + return 0; +} + static const struct tsens_ops ops_generic_v2 = { .init = init_common, .get_temp = get_temp_tsens_valid, @@ -122,6 +278,28 @@ struct tsens_plat_data data_ipq8074 = { .fields = tsens_v2_regfields, }; +static const struct tsens_ops ops_ipq5332 = { + .init = init_tsens_v2_no_rpm, + .get_temp = get_temp_tsens_valid, + .calibrate = tsens_v2_calibration, +}; + +struct tsens_plat_data data_ipq5332 = { + .num_sensors = 5, + .ops = &ops_ipq5332, + .hw_ids = (unsigned int []){11, 12, 13, 14, 15}, + .feat = &ipq5332_feat, + .fields = tsens_v2_regfields, +}; + +struct tsens_plat_data data_ipq5424 = { + .num_sensors = 7, + .ops = &ops_ipq5332, + .hw_ids = (unsigned int []){9, 10, 11, 12, 13, 14, 15}, + .feat = &ipq5332_feat, + .fields = tsens_v2_regfields, +}; + /* Kept around for backward compatibility with old msm8996.dtsi */ struct tsens_plat_data data_8996 = { .num_sensors = 13, diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 3aa3736181aa..1f5d4de017d9 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -975,7 +975,7 @@ int __init init_common(struct tsens_priv *priv) ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); if (ret) goto err_put_device; - if (!enabled) { + if (!enabled && (tsens_version(priv) != VER_2_X_NO_RPM)) { dev_err(dev, "%s: device not enabled\n", __func__); ret = -ENODEV; goto err_put_device; @@ -1102,6 +1102,12 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); static const struct of_device_id tsens_table[] = { { + .compatible = "qcom,ipq5332-tsens", + .data = &data_ipq5332, + }, { + .compatible = "qcom,ipq5424-tsens", + .data = &data_ipq5424, + }, { .compatible = "qcom,ipq8064-tsens", .data = &data_8960, }, { diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 7b36a0318fa6..dcc3100cd449 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -35,6 +35,7 @@ enum tsens_ver { VER_0_1, VER_1_X, VER_2_X, + VER_2_X_NO_RPM, }; enum tsens_irq_type { @@ -168,6 +169,7 @@ enum regfield_ids { TSENS_SW_RST, SENSOR_EN, CODE_OR_TEMP, + MAIN_MEASURE_PERIOD, /* ----- TM ------ */ /* TRDY */ @@ -650,6 +652,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8 extern struct tsens_plat_data data_tsens_v1, data_8937, data_8976, data_8956; /* TSENS v2 targets */ -extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2; +extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_ipq5424, data_tsens_v2; #endif /* __QCOM_TSENS_H__ */