new file mode 100644
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA87755P Display MDSS
+
+maintainers:
+ - Mahadevan <quic_mahap@quicinc.com>
+
+description:
+ SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sa8775p-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 3
+
+ interconnect-names:
+ maxItems: 3
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sa8775p-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sa8775p-dp
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sa8775p-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ /* same path used twice */
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
+
+
+ resets = <&dispcc_core_bcr>;
+ power-domains = <&dispcc_gdsc>;
+
+ clocks = <&dispcc_ahb_clk>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc_mdp_clk>;
+
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sa8775p-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc_ahb_clk>,
+ <&dispcc_mdp_lut_clk>,
+ <&dispcc_mdp_clk>,
+ <&dispcc_mdp_vsync_clk>;
+ clock-names = "bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdp_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+ };
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ displayport-controller@af54000 {
+ compatible = "qcom,sa8775p-dp";
+
+ pinctrl-0 = <&dp_hot_plug_det>;
+ pinctrl-names = "default";
+
+ reg = <0 0xaf54000 0 0x104>,
+ <0 0xaf54200 0 0x0c0>,
+ <0 0xaf55000 0 0x770>,
+ <0 0xaf56000 0 0x09c>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <12>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&dispcc_dptx0_aux_clk>,
+ <&dispcc_dptx0_link_clk>,
+ <&dispcc_dptx0_link_intf_clk>,
+ <&dispcc_dptx0_pixel0_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+ <&dispcc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>;
+
+ phys = <&mdss0_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss0_dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
Document the MDSS hardware found on the Qualcomm SA8775P platform. Signed-off-by: Mahadevan <quic_mahap@quicinc.com> --- [v2] - Use fake DISPCC nodes to avoid clock dependencies in dt-bindings. [Dmitry] - Update bindings by fixing dt_binding_check tool errors (update includes in example), adding proper spacing and indentation in binding example, dropping unused labels, dropping status disable, adding reset node. [Dmitry, Rob, Krzysztof] --- .../display/msm/qcom,sa8775p-mdss.yaml | 239 ++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml