From patchwork Sun Sep 22 11:33:47 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Md Sadre Alam X-Patchwork-Id: 830150 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 06B19194136; Sun, 22 Sep 2024 11:35:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727004911; cv=none; b=dtxj+xyHb8LR/EuMdn5G1JEYjpmkQCv4zLVZcnhytrpHPxR7JdpMDWl6pCvB/dIqCIgZNRvtfoatCEB2TLdJ+ZnDEDwtcSvLd9Be/KHzPts/o2m4ydWT0+EK95Vl4Dq8r4wi+OTShyfk46c5gPNU5WJ/PsokyI7GYZ8y5DlcNkQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727004911; c=relaxed/simple; bh=sr43xqhwv87LmdSyS9OWMDOd5Cm+O4UHdaPWhznwfXQ=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=QvsnL+yFMjMEPedF0Uh/5oHyOSGRET8khCJ4t8brgCBLXLFaRalBtsBKmduuvNtM4dLlN5dAjVqDE9AJ+4L81ew43C4hFSHFEVAwSJ5Z6dv7AmUq8cRzh/abKy9Wogn/8m/FJ9KXOmbBPtF15tUI3jzkKAkFJHPnSN44kqvkj4U= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=D+QGom/A; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="D+QGom/A" Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 48MBI3Ga023431; Sun, 22 Sep 2024 11:34:36 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 8NiG8lperp2ksheEcOa4CtdV9o5egTlQa/U4pr1Pkz0=; b=D+QGom/Ac4ceN11g 11MPcrUX9LZk00iF4CUfH0AG27KKfR1Q5bycfw39hjinZicsZvE+gT/X8B4cOCeD ooe1kScFLtAa9nVK0OejbZWpB75YlgmVDmwOe81uOZtKX/pzP7PG0m1seImBprdo TJQbg5r5fgHsVia2rUpFX/lf+DMQM3onII9roTfs2EC0NYA88N0hNjew8Y6WBghD r6g3Zk18dFaACe/ospFhbs+uE8208jebkd64LZpyLSuUV+244vpM45IHJ1t5OKij 3AQif1FNnnrM+XH1PwDqgrthjfWY/TdyoYdpYLSJrUy+w3M3W/sU6ba6jzvWvYsj UeDgAQ== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 41sn5bje0v-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sun, 22 Sep 2024 11:34:35 +0000 (GMT) Received: from nasanex01a.na.qualcomm.com (nasanex01a.na.qualcomm.com [10.52.223.231]) by NASANPPMTA05.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 48MBYYGs014894 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sun, 22 Sep 2024 11:34:34 GMT Received: from hu-mdalam-blr.qualcomm.com (10.80.80.8) by nasanex01a.na.qualcomm.com (10.52.223.231) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Sun, 22 Sep 2024 04:34:28 -0700 From: Md Sadre Alam To: , , , , , , , , , , , , , , , , , CC: , , Subject: [PATCH v10 4/8] mtd: nand: Add qpic_common API file Date: Sun, 22 Sep 2024 17:03:47 +0530 Message-ID: <20240922113351.2390195-5-quic_mdalam@quicinc.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240922113351.2390195-1-quic_mdalam@quicinc.com> References: <20240922113351.2390195-1-quic_mdalam@quicinc.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nasanex01a.na.qualcomm.com (10.52.223.231) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: nDyHuKD_esIbOHqRS23G9GautetkV8F2 X-Proofpoint-GUID: nDyHuKD_esIbOHqRS23G9GautetkV8F2 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 lowpriorityscore=0 suspectscore=0 adultscore=0 impostorscore=0 malwarescore=0 mlxlogscore=999 spamscore=0 mlxscore=0 priorityscore=1501 bulkscore=0 phishscore=0 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2408220000 definitions=main-2409220087 Add qpic_common.c file which hold all the common qpic APIs which will be used by both qpic raw nand driver and qpic spi nand driver. Signed-off-by: Md Sadre Alam --- Change in [v10] * No change Change in [v9] * No Change Change in [v8] * Removed "inline" from qcom_nandc_dev_to_mem() Change in [v7] * Removed partition.h * Updated commit message heading * Made CONFIG_MTD_NAND_QCOM as bool Change in [v6] * made changes to select qpic_common.c based on either CONFIG_MTD_NAND_QCOM=y or CONFIG_SPI_QPIC_SNAND=y * Removed rawnand.h from qpic_common.c * change nand_controller variable as a pointer type. Change in [v5] * Remove multiple dma call back to avoid race condition Change in [v4] * Added kernel doc for all common api as per kernel doc standard * Added QPIC_COMMON config to build qpic_common.c Change in [v3] * Added original copy right * Removed all EXPORT_SYMBOL() * Made this common api file more generic * Added qcom_ prefix to all api in this file * Removed devm_kfree and added kfree * Moved to_qcom_nand_controller() to raw nand driver since it was only used by raw nand driver, so not needed as common * Added kernel doc for all api * made reverse tree of variable declaration in prep_adm_dma_desc() function * Added if(!ret) condition in prep_adm_dma_desc() function * Initialized slave_conf as 0 while declaration Change in [v2] * Posted initial support for common api file Change in [v1] * Posted as RFC patch for design review drivers/mtd/nand/Makefile | 4 + drivers/mtd/nand/qpic_common.c | 738 +++++++++++++++++ drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/qcom_nandc.c | 1092 +------------------------- include/linux/mtd/nand-qpic-common.h | 468 +++++++++++ 5 files changed, 1223 insertions(+), 1081 deletions(-) create mode 100644 drivers/mtd/nand/qpic_common.c create mode 100644 include/linux/mtd/nand-qpic-common.h diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 19e1291ac4d5..760a6e4efdac 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -4,6 +4,10 @@ nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o +ifeq ($(CONFIG_MTD_NAND_QCOM),y) +obj-y += qpic_common.o +endif + obj-y += onenand/ obj-y += raw/ obj-y += spi/ diff --git a/drivers/mtd/nand/qpic_common.c b/drivers/mtd/nand/qpic_common.c new file mode 100644 index 000000000000..2fe1a82307b4 --- /dev/null +++ b/drivers/mtd/nand/qpic_common.c @@ -0,0 +1,738 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * qcom_free_bam_transaction() - Frees the BAM transaction memory + * @nandc: qpic nand controller + * + * This function frees the bam transaction memory + */ +void qcom_free_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + kfree(bam_txn); +} + +/** + * qcom_alloc_bam_transaction() - allocate BAM transaction + * @nandc: qpic nand controller + * + * This function will allocate and initialize the BAM transaction structure + */ +struct bam_transaction * +qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn; + size_t bam_txn_size; + unsigned int num_cw = nandc->max_cwperpage; + void *bam_txn_buf; + + bam_txn_size = + sizeof(*bam_txn) + num_cw * + ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) + + (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + + (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); + + bam_txn_buf = kzalloc(bam_txn_size, GFP_KERNEL); + if (!bam_txn_buf) + return NULL; + + bam_txn = bam_txn_buf; + bam_txn_buf += sizeof(*bam_txn); + + bam_txn->bam_ce = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw; + + bam_txn->cmd_sgl = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; + + bam_txn->data_sgl = bam_txn_buf; + + init_completion(&bam_txn->txn_done); + + return bam_txn; +} + +/** + * qcom_clear_bam_transaction() - Clears the BAM transaction + * @nandc: qpic nand controller + * + * This function will clear the BAM transaction indexes. + */ +void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (!nandc->props->supports_bam) + return; + + memset(&bam_txn->bam_ce_pos, 0, sizeof(u32) * 8); + bam_txn->last_data_desc = NULL; + + sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage * + QPIC_PER_CW_CMD_SGL); + sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage * + QPIC_PER_CW_DATA_SGL); + + reinit_completion(&bam_txn->txn_done); +} + +/** + * qcom_qpic_bam_dma_done() - Callback for DMA descriptor completion + * @data: data pointer + * + * This function is a callback for DMA descriptor completion + */ +void qcom_qpic_bam_dma_done(void *data) +{ + struct bam_transaction *bam_txn = data; + + complete(&bam_txn->txn_done); +} + +/** + * qcom_nandc_dev_to_mem() - Check for dma sync for cpu or device + * @nandc: qpic nand controller + * @is_cpu: cpu or Device + * + * This function will check for dma sync for cpu or device + */ +inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu) +{ + if (!nandc->props->supports_bam) + return; + + if (is_cpu) + dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + else + dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); +} + +/** + * qcom_prepare_bam_async_desc() - Prepare DMA descriptor + * @nandc: qpic nand controller + * @chan: dma channel + * @flags: flags to control DMA descriptor preparation + * + * This function maps the scatter gather list for DMA transfer and forms the + * DMA descriptor for BAM.This descriptor will be added in the NAND DMA + * descriptor queue which will be submitted to DMA engine. + */ +int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc, + struct dma_chan *chan, unsigned long flags) +{ + struct desc_info *desc; + struct scatterlist *sgl; + unsigned int sgl_cnt; + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + enum dma_transfer_direction dir_eng; + struct dma_async_tx_descriptor *dma_desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return -ENOMEM; + + if (chan == nandc->cmd_chan) { + sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start]; + sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start; + bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else if (chan == nandc->tx_chan) { + sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start]; + sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start; + bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else { + sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start]; + sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start; + bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos; + dir_eng = DMA_DEV_TO_MEM; + desc->dir = DMA_FROM_DEVICE; + } + + sg_mark_end(sgl + sgl_cnt - 1); + ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + if (ret == 0) { + dev_err(nandc->dev, "failure in mapping desc\n"); + kfree(desc); + return -ENOMEM; + } + + desc->sgl_cnt = sgl_cnt; + desc->bam_sgl = sgl; + + dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng, + flags); + + if (!dma_desc) { + dev_err(nandc->dev, "failure in prep desc\n"); + dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + kfree(desc); + return -EINVAL; + } + + desc->dma_desc = dma_desc; + + /* update last data/command descriptor */ + if (chan == nandc->cmd_chan) + bam_txn->last_cmd_desc = dma_desc; + else + bam_txn->last_data_desc = dma_desc; + + list_add_tail(&desc->node, &nandc->desc_list); + + return 0; +} + +/** + * qcom_prep_bam_dma_desc_cmd() - Prepares the command descriptor for BAM DMA + * @nandc: qpic nand controller + * @read: read or write type + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to write to + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares the command descriptor for BAM DMA + * which will be used for NAND register reads and writes. + */ +int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, + int size, unsigned int flags) +{ + int bam_ce_size; + int i, ret; + struct bam_cmd_element *bam_ce_buffer; + struct bam_transaction *bam_txn = nandc->bam_txn; + + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; + + /* fill the command desc */ + for (i = 0; i < size; i++) { + if (read) + bam_prep_ce(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_READ_COMMAND, + reg_buf_dma_addr(nandc, + (__le32 *)vaddr + i)); + else + bam_prep_ce_le32(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_WRITE_COMMAND, + *((__le32 *)vaddr + i)); + } + + bam_txn->bam_ce_pos += size; + + /* use the separate sgl after this command */ + if (flags & NAND_BAM_NEXT_SGL) { + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; + bam_ce_size = (bam_txn->bam_ce_pos - + bam_txn->bam_ce_start) * + sizeof(struct bam_cmd_element); + sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], + bam_ce_buffer, bam_ce_size); + bam_txn->cmd_sgl_pos++; + bam_txn->bam_ce_start = bam_txn->bam_ce_pos; + + if (flags & NAND_BAM_NWD) { + ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_FENCE | DMA_PREP_CMD); + if (ret) + return ret; + } + } + + return 0; +} + +/** + * qcom_prep_bam_dma_desc_data() - Prepares the data descriptor for BAM DMA + * @nandc: qpic nand controller + * @read: read or write type + * @vaddr: virtual address of the buffer we want to write to + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares the data descriptor for BAM DMA which + * will be used for NAND data reads and writes. + */ +int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read, + const void *vaddr, int size, unsigned int flags) +{ + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (read) { + sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos], + vaddr, size); + bam_txn->rx_sgl_pos++; + } else { + sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos], + vaddr, size); + bam_txn->tx_sgl_pos++; + + /* + * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag + * is not set, form the DMA descriptor + */ + if (!(flags & NAND_BAM_NO_EOT)) { + ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (ret) + return ret; + } + } + + return 0; +} + +/** + * qcom_prep_adm_dma_desc() - Prepare descriptor for adma + * @nandc: qpic nand controller + * @read: read or write type + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to write to + * @size: adm dma transaction size in bytes + * @flow_control: flow controller + * + * This function will prepare descriptor for adma + */ +int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, int size, + bool flow_control) +{ + struct qcom_adm_peripheral_config periph_conf = {}; + struct dma_async_tx_descriptor *dma_desc; + struct dma_slave_config slave_conf = {0}; + enum dma_transfer_direction dir_eng; + struct desc_info *desc; + struct scatterlist *sgl; + int ret; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return -ENOMEM; + + sgl = &desc->adm_sgl; + + sg_init_one(sgl, vaddr, size); + + if (read) { + dir_eng = DMA_DEV_TO_MEM; + desc->dir = DMA_FROM_DEVICE; + } else { + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } + + ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir); + if (!ret) { + ret = -ENOMEM; + goto err; + } + + slave_conf.device_fc = flow_control; + if (read) { + slave_conf.src_maxburst = 16; + slave_conf.src_addr = nandc->base_dma + reg_off; + if (nandc->data_crci) { + periph_conf.crci = nandc->data_crci; + slave_conf.peripheral_config = &periph_conf; + slave_conf.peripheral_size = sizeof(periph_conf); + } + } else { + slave_conf.dst_maxburst = 16; + slave_conf.dst_addr = nandc->base_dma + reg_off; + if (nandc->cmd_crci) { + periph_conf.crci = nandc->cmd_crci; + slave_conf.peripheral_config = &periph_conf; + slave_conf.peripheral_size = sizeof(periph_conf); + } + } + + ret = dmaengine_slave_config(nandc->chan, &slave_conf); + if (ret) { + dev_err(nandc->dev, "failed to configure dma channel\n"); + goto err; + } + + dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0); + if (!dma_desc) { + dev_err(nandc->dev, "failed to prepare desc\n"); + ret = -EINVAL; + goto err; + } + + desc->dma_desc = dma_desc; + + list_add_tail(&desc->node, &nandc->desc_list); + + return 0; +err: + kfree(desc); + + return ret; +} + +/** + * qcom_read_reg_dma() - read a given number of registers to the reg_read_buf pointer + * @nandc: qpic nand controller + * @first: offset of the first register in the contiguous block + * @num_regs: number of registers to read + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares a descriptor to read a given number of + * contiguous registers to the reg_read_buf pointer. + */ +int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first, + int num_regs, unsigned int flags) +{ + bool flow_control = false; + void *vaddr; + + vaddr = nandc->reg_read_buf + nandc->reg_read_pos; + nandc->reg_read_pos += num_regs; + + if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, first); + + if (nandc->props->supports_bam) + return qcom_prep_bam_dma_desc_cmd(nandc, true, first, vaddr, + num_regs, flags); + + if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) + flow_control = true; + + return qcom_prep_adm_dma_desc(nandc, true, first, vaddr, + num_regs * sizeof(u32), flow_control); +} + +/** + * qcom_write_reg_dma() - write a given number of registers + * @nandc: qpic nand controller + * @vaddr: contnigeous memory from where register value will + * be written + * @first: offset of the first register in the contiguous block + * @num_regs: number of registers to write + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares a descriptor to write a given number of + * contiguous registers + */ +int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr, + int first, int num_regs, unsigned int flags) +{ + bool flow_control = false; + + if (first == NAND_EXEC_CMD) + flags |= NAND_BAM_NWD; + + if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1); + + if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); + + if (nandc->props->supports_bam) + return qcom_prep_bam_dma_desc_cmd(nandc, false, first, vaddr, + num_regs, flags); + + if (first == NAND_FLASH_CMD) + flow_control = true; + + return qcom_prep_adm_dma_desc(nandc, false, first, vaddr, + num_regs * sizeof(u32), flow_control); +} + +/** + * qcom_read_data_dma() - transfer data + * @nandc: qpic nand controller + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to write to + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares a DMA descriptor to transfer data from the + * controller's internal buffer to the buffer 'vaddr' + */ +int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off, + const u8 *vaddr, int size, unsigned int flags) +{ + if (nandc->props->supports_bam) + return qcom_prep_bam_dma_desc_data(nandc, true, vaddr, size, flags); + + return qcom_prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false); +} + +/** + * qcom_write_data_dma() - transfer data + * @nandc: qpic nand controller + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to read from + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + * + * This function will prepares a DMA descriptor to transfer data from + * 'vaddr' to the controller's internal buffer + */ +int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off, + const u8 *vaddr, int size, unsigned int flags) +{ + if (nandc->props->supports_bam) + return qcom_prep_bam_dma_desc_data(nandc, false, vaddr, size, flags); + + return qcom_prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false); +} + +/** + * qcom_submit_descs() - submit dma descriptor + * @nandc: qpic nand controller + * + * This function will submit all the prepared dma descriptor + * cmd or data descriptor + */ +int qcom_submit_descs(struct qcom_nand_controller *nandc) +{ + struct desc_info *desc, *n; + dma_cookie_t cookie = 0; + struct bam_transaction *bam_txn = nandc->bam_txn; + int ret = 0; + + if (nandc->props->supports_bam) { + if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) { + ret = qcom_prepare_bam_async_desc(nandc, nandc->rx_chan, 0); + if (ret) + goto err_unmap_free_desc; + } + + if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) { + ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (ret) + goto err_unmap_free_desc; + } + + if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { + ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_CMD); + if (ret) + goto err_unmap_free_desc; + } + } + + list_for_each_entry(desc, &nandc->desc_list, node) + cookie = dmaengine_submit(desc->dma_desc); + + if (nandc->props->supports_bam) { + bam_txn->last_cmd_desc->callback = qcom_qpic_bam_dma_done; + bam_txn->last_cmd_desc->callback_param = bam_txn; + + dma_async_issue_pending(nandc->tx_chan); + dma_async_issue_pending(nandc->rx_chan); + dma_async_issue_pending(nandc->cmd_chan); + + if (!wait_for_completion_timeout(&bam_txn->txn_done, + QPIC_NAND_COMPLETION_TIMEOUT)) + ret = -ETIMEDOUT; + } else { + if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) + ret = -ETIMEDOUT; + } + +err_unmap_free_desc: + /* + * Unmap the dma sg_list and free the desc allocated by both + * qcom_prepare_bam_async_desc() and qcom_prep_adm_dma_desc() functions. + */ + list_for_each_entry_safe(desc, n, &nandc->desc_list, node) { + list_del(&desc->node); + + if (nandc->props->supports_bam) + dma_unmap_sg(nandc->dev, desc->bam_sgl, + desc->sgl_cnt, desc->dir); + else + dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1, + desc->dir); + + kfree(desc); + } + + return ret; +} + +/** + * qcom_clear_read_regs() - reset the read register buffer + * @nandc: qpic nand controller + * + * This function reset the register read buffer for next NAND operation + */ +void qcom_clear_read_regs(struct qcom_nand_controller *nandc) +{ + nandc->reg_read_pos = 0; + qcom_nandc_dev_to_mem(nandc, false); +} + +/** + * qcom_nandc_unalloc() - unallocate qpic nand controller + * @nandc: qpic nand controller + * + * This function will unallocate memory alloacted for qpic nand controller + */ +void qcom_nandc_unalloc(struct qcom_nand_controller *nandc) +{ + if (nandc->props->supports_bam) { + if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma)) + dma_unmap_single(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + + if (nandc->tx_chan) + dma_release_channel(nandc->tx_chan); + + if (nandc->rx_chan) + dma_release_channel(nandc->rx_chan); + + if (nandc->cmd_chan) + dma_release_channel(nandc->cmd_chan); + } else { + if (nandc->chan) + dma_release_channel(nandc->chan); + } +} + +/** + * qcom_nandc_alloc() - Allocate qpic nand controller + * @nandc: qpic nand controller + * + * This function will allocate memory for qpic nand controller + */ +int qcom_nandc_alloc(struct qcom_nand_controller *nandc) +{ + int ret; + + ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(nandc->dev, "failed to set DMA mask\n"); + return ret; + } + + /* + * we use the internal buffer for reading ONFI params, reading small + * data like ID and status, and preforming read-copy-write operations + * when writing to a codeword partially. 532 is the maximum possible + * size of a codeword for our nand controller + */ + nandc->buf_size = 532; + + nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size, GFP_KERNEL); + if (!nandc->data_buffer) + return -ENOMEM; + + nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs), GFP_KERNEL); + if (!nandc->regs) + return -ENOMEM; + + nandc->reg_read_buf = devm_kcalloc(nandc->dev, MAX_REG_RD, + sizeof(*nandc->reg_read_buf), + GFP_KERNEL); + if (!nandc->reg_read_buf) + return -ENOMEM; + + if (nandc->props->supports_bam) { + nandc->reg_read_dma = + dma_map_single(nandc->dev, nandc->reg_read_buf, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) { + dev_err(nandc->dev, "failed to DMA MAP reg buffer\n"); + return -EIO; + } + + nandc->tx_chan = dma_request_chan(nandc->dev, "tx"); + if (IS_ERR(nandc->tx_chan)) { + ret = PTR_ERR(nandc->tx_chan); + nandc->tx_chan = NULL; + dev_err_probe(nandc->dev, ret, + "tx DMA channel request failed\n"); + goto unalloc; + } + + nandc->rx_chan = dma_request_chan(nandc->dev, "rx"); + if (IS_ERR(nandc->rx_chan)) { + ret = PTR_ERR(nandc->rx_chan); + nandc->rx_chan = NULL; + dev_err_probe(nandc->dev, ret, + "rx DMA channel request failed\n"); + goto unalloc; + } + + nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd"); + if (IS_ERR(nandc->cmd_chan)) { + ret = PTR_ERR(nandc->cmd_chan); + nandc->cmd_chan = NULL; + dev_err_probe(nandc->dev, ret, + "cmd DMA channel request failed\n"); + goto unalloc; + } + + /* + * Initially allocate BAM transaction to read ONFI param page. + * After detecting all the devices, this BAM transaction will + * be freed and the next BAM transaction will be allocated with + * maximum codeword size + */ + nandc->max_cwperpage = 1; + nandc->bam_txn = qcom_alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + ret = -ENOMEM; + goto unalloc; + } + } else { + nandc->chan = dma_request_chan(nandc->dev, "rxtx"); + if (IS_ERR(nandc->chan)) { + ret = PTR_ERR(nandc->chan); + nandc->chan = NULL; + dev_err_probe(nandc->dev, ret, + "rxtx DMA channel request failed\n"); + return ret; + } + } + + INIT_LIST_HEAD(&nandc->desc_list); + INIT_LIST_HEAD(&nandc->host_list); + + return 0; +unalloc: + qcom_nandc_unalloc(nandc); + return ret; +} diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index d0aaccf72d78..47f5a7561a73 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -330,7 +330,7 @@ config MTD_NAND_HISI504 Enables support for NAND controller on Hisilicon SoC Hip04. config MTD_NAND_QCOM - tristate "QCOM NAND controller" + bool "QCOM NAND controller" depends on ARCH_QCOM || COMPILE_TEST depends on HAS_IOMEM help diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index daf8f73b25bc..91f1eb781cb2 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -15,417 +15,7 @@ #include #include #include - -/* NANDc reg offsets */ -#define NAND_FLASH_CMD 0x00 -#define NAND_ADDR0 0x04 -#define NAND_ADDR1 0x08 -#define NAND_FLASH_CHIP_SELECT 0x0c -#define NAND_EXEC_CMD 0x10 -#define NAND_FLASH_STATUS 0x14 -#define NAND_BUFFER_STATUS 0x18 -#define NAND_DEV0_CFG0 0x20 -#define NAND_DEV0_CFG1 0x24 -#define NAND_DEV0_ECC_CFG 0x28 -#define NAND_AUTO_STATUS_EN 0x2c -#define NAND_DEV1_CFG0 0x30 -#define NAND_DEV1_CFG1 0x34 -#define NAND_READ_ID 0x40 -#define NAND_READ_STATUS 0x44 -#define NAND_DEV_CMD0 0xa0 -#define NAND_DEV_CMD1 0xa4 -#define NAND_DEV_CMD2 0xa8 -#define NAND_DEV_CMD_VLD 0xac -#define SFLASHC_BURST_CFG 0xe0 -#define NAND_ERASED_CW_DETECT_CFG 0xe8 -#define NAND_ERASED_CW_DETECT_STATUS 0xec -#define NAND_EBI2_ECC_BUF_CFG 0xf0 -#define FLASH_BUF_ACC 0x100 - -#define NAND_CTRL 0xf00 -#define NAND_VERSION 0xf08 -#define NAND_READ_LOCATION_0 0xf20 -#define NAND_READ_LOCATION_1 0xf24 -#define NAND_READ_LOCATION_2 0xf28 -#define NAND_READ_LOCATION_3 0xf2c -#define NAND_READ_LOCATION_LAST_CW_0 0xf40 -#define NAND_READ_LOCATION_LAST_CW_1 0xf44 -#define NAND_READ_LOCATION_LAST_CW_2 0xf48 -#define NAND_READ_LOCATION_LAST_CW_3 0xf4c - -/* dummy register offsets, used by qcom_write_reg_dma */ -#define NAND_DEV_CMD1_RESTORE 0xdead -#define NAND_DEV_CMD_VLD_RESTORE 0xbeef - -/* NAND_FLASH_CMD bits */ -#define PAGE_ACC BIT(4) -#define LAST_PAGE BIT(5) - -/* NAND_FLASH_CHIP_SELECT bits */ -#define NAND_DEV_SEL 0 -#define DM_EN BIT(2) - -/* NAND_FLASH_STATUS bits */ -#define FS_OP_ERR BIT(4) -#define FS_READY_BSY_N BIT(5) -#define FS_MPU_ERR BIT(8) -#define FS_DEVICE_STS_ERR BIT(16) -#define FS_DEVICE_WP BIT(23) - -/* NAND_BUFFER_STATUS bits */ -#define BS_UNCORRECTABLE_BIT BIT(8) -#define BS_CORRECTABLE_ERR_MSK 0x1f - -/* NAND_DEVn_CFG0 bits */ -#define DISABLE_STATUS_AFTER_WRITE 4 -#define CW_PER_PAGE 6 -#define UD_SIZE_BYTES 9 -#define UD_SIZE_BYTES_MASK GENMASK(18, 9) -#define ECC_PARITY_SIZE_BYTES_RS 19 -#define SPARE_SIZE_BYTES 23 -#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23) -#define NUM_ADDR_CYCLES 27 -#define STATUS_BFR_READ 30 -#define SET_RD_MODE_AFTER_STATUS 31 - -/* NAND_DEVn_CFG0 bits */ -#define DEV0_CFG1_ECC_DISABLE 0 -#define WIDE_FLASH 1 -#define NAND_RECOVERY_CYCLES 2 -#define CS_ACTIVE_BSY 5 -#define BAD_BLOCK_BYTE_NUM 6 -#define BAD_BLOCK_IN_SPARE_AREA 16 -#define WR_RD_BSY_GAP 17 -#define ENABLE_BCH_ECC 27 - -/* NAND_DEV0_ECC_CFG bits */ -#define ECC_CFG_ECC_DISABLE 0 -#define ECC_SW_RESET 1 -#define ECC_MODE 4 -#define ECC_PARITY_SIZE_BYTES_BCH 8 -#define ECC_NUM_DATA_BYTES 16 -#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16) -#define ECC_FORCE_CLK_OPEN 30 - -/* NAND_DEV_CMD1 bits */ -#define READ_ADDR 0 - -/* NAND_DEV_CMD_VLD bits */ -#define READ_START_VLD BIT(0) -#define READ_STOP_VLD BIT(1) -#define WRITE_START_VLD BIT(2) -#define ERASE_START_VLD BIT(3) -#define SEQ_READ_START_VLD BIT(4) - -/* NAND_EBI2_ECC_BUF_CFG bits */ -#define NUM_STEPS 0 - -/* NAND_ERASED_CW_DETECT_CFG bits */ -#define ERASED_CW_ECC_MASK 1 -#define AUTO_DETECT_RES 0 -#define MASK_ECC BIT(ERASED_CW_ECC_MASK) -#define RESET_ERASED_DET BIT(AUTO_DETECT_RES) -#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES) -#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC) -#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC) - -/* NAND_ERASED_CW_DETECT_STATUS bits */ -#define PAGE_ALL_ERASED BIT(7) -#define CODEWORD_ALL_ERASED BIT(6) -#define PAGE_ERASED BIT(5) -#define CODEWORD_ERASED BIT(4) -#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED) -#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) - -/* NAND_READ_LOCATION_n bits */ -#define READ_LOCATION_OFFSET 0 -#define READ_LOCATION_SIZE 16 -#define READ_LOCATION_LAST 31 - -/* Version Mask */ -#define NAND_VERSION_MAJOR_MASK 0xf0000000 -#define NAND_VERSION_MAJOR_SHIFT 28 -#define NAND_VERSION_MINOR_MASK 0x0fff0000 -#define NAND_VERSION_MINOR_SHIFT 16 - -/* NAND OP_CMDs */ -#define OP_PAGE_READ 0x2 -#define OP_PAGE_READ_WITH_ECC 0x3 -#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 -#define OP_PAGE_READ_ONFI_READ 0x5 -#define OP_PROGRAM_PAGE 0x6 -#define OP_PAGE_PROGRAM_WITH_ECC 0x7 -#define OP_PROGRAM_PAGE_SPARE 0x9 -#define OP_BLOCK_ERASE 0xa -#define OP_CHECK_STATUS 0xc -#define OP_FETCH_ID 0xb -#define OP_RESET_DEVICE 0xd - -/* Default Value for NAND_DEV_CMD_VLD */ -#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ - ERASE_START_VLD | SEQ_READ_START_VLD) - -/* NAND_CTRL bits */ -#define BAM_MODE_EN BIT(0) - -/* - * the NAND controller performs reads/writes with ECC in 516 byte chunks. - * the driver calls the chunks 'step' or 'codeword' interchangeably - */ -#define NANDC_STEP_SIZE 512 - -/* - * the largest page size we support is 8K, this will have 16 steps/codewords - * of 512 bytes each - */ -#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE) - -/* we read at most 3 registers per codeword scan */ -#define MAX_REG_RD (3 * MAX_NUM_STEPS) - -/* ECC modes supported by the controller */ -#define ECC_NONE BIT(0) -#define ECC_RS_4BIT BIT(1) -#define ECC_BCH_4BIT BIT(2) -#define ECC_BCH_8BIT BIT(3) - -/* - * Returns the actual register address for all NAND_DEV_ registers - * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD) - */ -#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) - -/* Returns the NAND register physical address */ -#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) - -/* Returns the dma address for reg read buffer */ -#define reg_buf_dma_addr(chip, vaddr) \ - ((chip)->reg_read_dma + \ - ((u8 *)(vaddr) - (u8 *)(chip)->reg_read_buf)) - -#define QPIC_PER_CW_CMD_ELEMENTS 32 -#define QPIC_PER_CW_CMD_SGL 32 -#define QPIC_PER_CW_DATA_SGL 8 - -#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000) - -/* - * Flags used in DMA descriptor preparation helper functions - * (i.e. qcom_read_reg_dma/qcom_write_reg_dma/qcom_read_data_dma/qcom_write_data_dma) - */ -/* Don't set the EOT in current tx BAM sgl */ -#define NAND_BAM_NO_EOT BIT(0) -/* Set the NWD flag in current BAM sgl */ -#define NAND_BAM_NWD BIT(1) -/* Finish writing in the current BAM sgl and start writing in another BAM sgl */ -#define NAND_BAM_NEXT_SGL BIT(2) -/* - * Erased codeword status is being used two times in single transfer so this - * flag will determine the current value of erased codeword status register - */ -#define NAND_ERASED_CW_SET BIT(4) - -#define MAX_ADDRESS_CYCLE 5 - -/* - * This data type corresponds to the BAM transaction which will be used for all - * NAND transfers. - * @bam_ce - the array of BAM command elements - * @cmd_sgl - sgl for NAND BAM command pipe - * @data_sgl - sgl for NAND BAM consumer/producer pipe - * @last_data_desc - last DMA desc in data channel (tx/rx). - * @last_cmd_desc - last DMA desc in command channel. - * @txn_done - completion for NAND transfer. - * @bam_ce_pos - the index in bam_ce which is available for next sgl - * @bam_ce_start - the index in bam_ce which marks the start position ce - * for current sgl. It will be used for size calculation - * for current sgl - * @cmd_sgl_pos - current index in command sgl. - * @cmd_sgl_start - start index in command sgl. - * @tx_sgl_pos - current index in data sgl for tx. - * @tx_sgl_start - start index in data sgl for tx. - * @rx_sgl_pos - current index in data sgl for rx. - * @rx_sgl_start - start index in data sgl for rx. - */ -struct bam_transaction { - struct bam_cmd_element *bam_ce; - struct scatterlist *cmd_sgl; - struct scatterlist *data_sgl; - struct dma_async_tx_descriptor *last_data_desc; - struct dma_async_tx_descriptor *last_cmd_desc; - struct completion txn_done; - u32 bam_ce_pos; - u32 bam_ce_start; - u32 cmd_sgl_pos; - u32 cmd_sgl_start; - u32 tx_sgl_pos; - u32 tx_sgl_start; - u32 rx_sgl_pos; - u32 rx_sgl_start; -}; - -/* - * This data type corresponds to the nand dma descriptor - * @dma_desc - low level DMA engine descriptor - * @list - list for desc_info - * - * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by - * ADM - * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM - * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM - * @dir - DMA transfer direction - */ -struct desc_info { - struct dma_async_tx_descriptor *dma_desc; - struct list_head node; - - union { - struct scatterlist adm_sgl; - struct { - struct scatterlist *bam_sgl; - int sgl_cnt; - }; - }; - enum dma_data_direction dir; -}; - -/* - * holds the current register values that we want to write. acts as a contiguous - * chunk of memory which we use to write the controller registers through DMA. - */ -struct nandc_regs { - __le32 cmd; - __le32 addr0; - __le32 addr1; - __le32 chip_sel; - __le32 exec; - - __le32 cfg0; - __le32 cfg1; - __le32 ecc_bch_cfg; - - __le32 clrflashstatus; - __le32 clrreadstatus; - - __le32 cmd1; - __le32 vld; - - __le32 orig_cmd1; - __le32 orig_vld; - - __le32 ecc_buf_cfg; - __le32 read_location0; - __le32 read_location1; - __le32 read_location2; - __le32 read_location3; - __le32 read_location_last0; - __le32 read_location_last1; - __le32 read_location_last2; - __le32 read_location_last3; - - __le32 erased_cw_detect_cfg_clr; - __le32 erased_cw_detect_cfg_set; -}; - -/* - * NAND controller data struct - * - * @dev: parent device - * - * @base: MMIO base - * - * @core_clk: controller clock - * @aon_clk: another controller clock - * - * @regs: a contiguous chunk of memory for DMA register - * writes. contains the register values to be - * written to controller - * - * @props: properties of current NAND controller, - * initialized via DT match data - * - * @controller: base controller structure - * @host_list: list containing all the chips attached to the - * controller - * - * @chan: dma channel - * @cmd_crci: ADM DMA CRCI for command flow control - * @data_crci: ADM DMA CRCI for data flow control - * - * @desc_list: DMA descriptor list (list of desc_infos) - * - * @data_buffer: our local DMA buffer for page read/writes, - * used when we can't use the buffer provided - * by upper layers directly - * @reg_read_buf: local buffer for reading back registers via DMA - * - * @base_phys: physical base address of controller registers - * @base_dma: dma base address of controller registers - * @reg_read_dma: contains dma address for register read buffer - * - * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf - * functions - * @max_cwperpage: maximum QPIC codewords required. calculated - * from all connected NAND devices pagesize - * - * @reg_read_pos: marker for data read in reg_read_buf - * - * @cmd1/vld: some fixed controller register values - * - * @exec_opwrite: flag to select correct number of code word - * while reading status - */ -struct qcom_nand_controller { - struct device *dev; - - void __iomem *base; - - struct clk *core_clk; - struct clk *aon_clk; - - struct nandc_regs *regs; - struct bam_transaction *bam_txn; - - const struct qcom_nandc_props *props; - - struct nand_controller controller; - struct list_head host_list; - - union { - /* will be used only by QPIC for BAM DMA */ - struct { - struct dma_chan *tx_chan; - struct dma_chan *rx_chan; - struct dma_chan *cmd_chan; - }; - - /* will be used only by EBI2 for ADM DMA */ - struct { - struct dma_chan *chan; - unsigned int cmd_crci; - unsigned int data_crci; - }; - }; - - struct list_head desc_list; - - u8 *data_buffer; - __le32 *reg_read_buf; - - phys_addr_t base_phys; - dma_addr_t base_dma; - dma_addr_t reg_read_dma; - - int buf_size; - int buf_count; - int buf_start; - unsigned int max_cwperpage; - - int reg_read_pos; - - u32 cmd1, vld; - bool exec_opwrite; -}; +#include /* * NAND special boot partitions @@ -530,97 +120,6 @@ struct qcom_nand_host { bool bch_enabled; }; -/* - * This data type corresponds to the NAND controller properties which varies - * among different NAND controllers. - * @ecc_modes - ecc mode for NAND - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset - * @supports_bam - whether NAND controller is using BAM - * @nandc_part_of_qpic - whether NAND controller is part of qpic IP - * @qpic_version2 - flag to indicate QPIC IP version 2 - * @use_codeword_fixup - whether NAND has different layout for boot partitions - */ -struct qcom_nandc_props { - u32 ecc_modes; - u32 dev_cmd_reg_start; - bool supports_bam; - bool nandc_part_of_qpic; - bool qpic_version2; - bool use_codeword_fixup; -}; - -/* Frees the BAM transaction memory */ -static void qcom_free_bam_transaction(struct qcom_nand_controller *nandc) -{ - struct bam_transaction *bam_txn = nandc->bam_txn; - - devm_kfree(nandc->dev, bam_txn); -} - -/* Allocates and Initializes the BAM transaction */ -static struct bam_transaction * -qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc) -{ - struct bam_transaction *bam_txn; - size_t bam_txn_size; - unsigned int num_cw = nandc->max_cwperpage; - void *bam_txn_buf; - - bam_txn_size = - sizeof(*bam_txn) + num_cw * - ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) + - (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + - (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); - - bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL); - if (!bam_txn_buf) - return NULL; - - bam_txn = bam_txn_buf; - bam_txn_buf += sizeof(*bam_txn); - - bam_txn->bam_ce = bam_txn_buf; - bam_txn_buf += - sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw; - - bam_txn->cmd_sgl = bam_txn_buf; - bam_txn_buf += - sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; - - bam_txn->data_sgl = bam_txn_buf; - - init_completion(&bam_txn->txn_done); - - return bam_txn; -} - -/* Clears the BAM transaction indexes */ -static void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc) -{ - struct bam_transaction *bam_txn = nandc->bam_txn; - - if (!nandc->props->supports_bam) - return; - - memset(&bam_txn->bam_ce_pos, 0, sizeof(u32) * 8); - bam_txn->last_data_desc = NULL; - - sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage * - QPIC_PER_CW_CMD_SGL); - sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage * - QPIC_PER_CW_DATA_SGL); - - reinit_completion(&bam_txn->txn_done); -} - -/* Callback for DMA descriptor completion */ -static void qcom_qpic_bam_dma_done(void *data) -{ - struct bam_transaction *bam_txn = data; - - complete(&bam_txn->txn_done); -} - static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) { return container_of(chip, struct qcom_nand_host, chip); @@ -629,8 +128,8 @@ static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) static inline struct qcom_nand_controller * get_qcom_nand_controller(struct nand_chip *chip) { - return container_of(chip->controller, struct qcom_nand_controller, - controller); + return (struct qcom_nand_controller *) + ((u8 *)chip->controller - sizeof(struct qcom_nand_controller)); } static inline u32 nandc_read(struct qcom_nand_controller *nandc, int offset) @@ -644,23 +143,6 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset, iowrite32(val, nandc->base + offset); } -static inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu) -{ - if (!nandc->props->supports_bam) - return; - - if (is_cpu) - dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma, - MAX_REG_RD * - sizeof(*nandc->reg_read_buf), - DMA_FROM_DEVICE); - else - dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma, - MAX_REG_RD * - sizeof(*nandc->reg_read_buf), - DMA_FROM_DEVICE); -} - /* Helper to check the code word, whether it is last cw or not */ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw) { @@ -819,356 +301,6 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i host->cw_data : host->cw_size, 1); } -/* - * Maps the scatter gather list for DMA transfer and forms the DMA descriptor - * for BAM. This descriptor will be added in the NAND DMA descriptor queue - * which will be submitted to DMA engine. - */ -static int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc, - struct dma_chan *chan, - unsigned long flags) -{ - struct desc_info *desc; - struct scatterlist *sgl; - unsigned int sgl_cnt; - int ret; - struct bam_transaction *bam_txn = nandc->bam_txn; - enum dma_transfer_direction dir_eng; - struct dma_async_tx_descriptor *dma_desc; - - desc = kzalloc(sizeof(*desc), GFP_KERNEL); - if (!desc) - return -ENOMEM; - - if (chan == nandc->cmd_chan) { - sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start]; - sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start; - bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos; - dir_eng = DMA_MEM_TO_DEV; - desc->dir = DMA_TO_DEVICE; - } else if (chan == nandc->tx_chan) { - sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start]; - sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start; - bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos; - dir_eng = DMA_MEM_TO_DEV; - desc->dir = DMA_TO_DEVICE; - } else { - sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start]; - sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start; - bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos; - dir_eng = DMA_DEV_TO_MEM; - desc->dir = DMA_FROM_DEVICE; - } - - sg_mark_end(sgl + sgl_cnt - 1); - ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir); - if (ret == 0) { - dev_err(nandc->dev, "failure in mapping desc\n"); - kfree(desc); - return -ENOMEM; - } - - desc->sgl_cnt = sgl_cnt; - desc->bam_sgl = sgl; - - dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng, - flags); - - if (!dma_desc) { - dev_err(nandc->dev, "failure in prep desc\n"); - dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir); - kfree(desc); - return -EINVAL; - } - - desc->dma_desc = dma_desc; - - /* update last data/command descriptor */ - if (chan == nandc->cmd_chan) - bam_txn->last_cmd_desc = dma_desc; - else - bam_txn->last_data_desc = dma_desc; - - list_add_tail(&desc->node, &nandc->desc_list); - - return 0; -} - -/* - * Prepares the command descriptor for BAM DMA which will be used for NAND - * register reads and writes. The command descriptor requires the command - * to be formed in command element type so this function uses the command - * element from bam transaction ce array and fills the same with required - * data. A single SGL can contain multiple command elements so - * NAND_BAM_NEXT_SGL will be used for starting the separate SGL - * after the current command element. - */ -static int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, - int reg_off, const void *vaddr, - int size, unsigned int flags) -{ - int bam_ce_size; - int i, ret; - struct bam_cmd_element *bam_ce_buffer; - struct bam_transaction *bam_txn = nandc->bam_txn; - - bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; - - /* fill the command desc */ - for (i = 0; i < size; i++) { - if (read) - bam_prep_ce(&bam_ce_buffer[i], - nandc_reg_phys(nandc, reg_off + 4 * i), - BAM_READ_COMMAND, - reg_buf_dma_addr(nandc, - (__le32 *)vaddr + i)); - else - bam_prep_ce_le32(&bam_ce_buffer[i], - nandc_reg_phys(nandc, reg_off + 4 * i), - BAM_WRITE_COMMAND, - *((__le32 *)vaddr + i)); - } - - bam_txn->bam_ce_pos += size; - - /* use the separate sgl after this command */ - if (flags & NAND_BAM_NEXT_SGL) { - bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; - bam_ce_size = (bam_txn->bam_ce_pos - - bam_txn->bam_ce_start) * - sizeof(struct bam_cmd_element); - sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], - bam_ce_buffer, bam_ce_size); - bam_txn->cmd_sgl_pos++; - bam_txn->bam_ce_start = bam_txn->bam_ce_pos; - - if (flags & NAND_BAM_NWD) { - ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan, - DMA_PREP_FENCE | - DMA_PREP_CMD); - if (ret) - return ret; - } - } - - return 0; -} - -/* - * Prepares the data descriptor for BAM DMA which will be used for NAND - * data reads and writes. - */ -static int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read, - const void *vaddr, int size, unsigned int flags) -{ - int ret; - struct bam_transaction *bam_txn = nandc->bam_txn; - - if (read) { - sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos], - vaddr, size); - bam_txn->rx_sgl_pos++; - } else { - sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos], - vaddr, size); - bam_txn->tx_sgl_pos++; - - /* - * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag - * is not set, form the DMA descriptor - */ - if (!(flags & NAND_BAM_NO_EOT)) { - ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan, - DMA_PREP_INTERRUPT); - if (ret) - return ret; - } - } - - return 0; -} - -static int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, - int reg_off, const void *vaddr, int size, - bool flow_control) -{ - struct desc_info *desc; - struct dma_async_tx_descriptor *dma_desc; - struct scatterlist *sgl; - struct dma_slave_config slave_conf; - struct qcom_adm_peripheral_config periph_conf = {}; - enum dma_transfer_direction dir_eng; - int ret; - - desc = kzalloc(sizeof(*desc), GFP_KERNEL); - if (!desc) - return -ENOMEM; - - sgl = &desc->adm_sgl; - - sg_init_one(sgl, vaddr, size); - - if (read) { - dir_eng = DMA_DEV_TO_MEM; - desc->dir = DMA_FROM_DEVICE; - } else { - dir_eng = DMA_MEM_TO_DEV; - desc->dir = DMA_TO_DEVICE; - } - - ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir); - if (ret == 0) { - ret = -ENOMEM; - goto err; - } - - memset(&slave_conf, 0x00, sizeof(slave_conf)); - - slave_conf.device_fc = flow_control; - if (read) { - slave_conf.src_maxburst = 16; - slave_conf.src_addr = nandc->base_dma + reg_off; - if (nandc->data_crci) { - periph_conf.crci = nandc->data_crci; - slave_conf.peripheral_config = &periph_conf; - slave_conf.peripheral_size = sizeof(periph_conf); - } - } else { - slave_conf.dst_maxburst = 16; - slave_conf.dst_addr = nandc->base_dma + reg_off; - if (nandc->cmd_crci) { - periph_conf.crci = nandc->cmd_crci; - slave_conf.peripheral_config = &periph_conf; - slave_conf.peripheral_size = sizeof(periph_conf); - } - } - - ret = dmaengine_slave_config(nandc->chan, &slave_conf); - if (ret) { - dev_err(nandc->dev, "failed to configure dma channel\n"); - goto err; - } - - dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0); - if (!dma_desc) { - dev_err(nandc->dev, "failed to prepare desc\n"); - ret = -EINVAL; - goto err; - } - - desc->dma_desc = dma_desc; - - list_add_tail(&desc->node, &nandc->desc_list); - - return 0; -err: - kfree(desc); - - return ret; -} - -/* - * qcom_read_reg_dma: prepares a descriptor to read a given number of - * contiguous registers to the reg_read_buf pointer - * - * @first: offset of the first register in the contiguous block - * @num_regs: number of registers to read - * @flags: flags to control DMA descriptor preparation - */ -static int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first, - int num_regs, unsigned int flags) -{ - bool flow_control = false; - void *vaddr; - - vaddr = nandc->reg_read_buf + nandc->reg_read_pos; - nandc->reg_read_pos += num_regs; - - if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) - first = dev_cmd_reg_addr(nandc, first); - - if (nandc->props->supports_bam) - return qcom_prep_bam_dma_desc_cmd(nandc, true, first, vaddr, - num_regs, flags); - - if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) - flow_control = true; - - return qcom_prep_adm_dma_desc(nandc, true, first, vaddr, - num_regs * sizeof(u32), flow_control); -} - -/* - * qcom_write_reg_dma: prepares a descriptor to write a given number of - * contiguous registers - * - * @vaddr: contnigeous memory from where register value will - * be written - * @first: offset of the first register in the contiguous block - * @num_regs: number of registers to write - * @flags: flags to control DMA descriptor preparation - */ -static int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr, - int first, int num_regs, unsigned int flags) -{ - bool flow_control = false; - - if (first == NAND_EXEC_CMD) - flags |= NAND_BAM_NWD; - - if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1) - first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1); - - if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) - first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); - - if (nandc->props->supports_bam) - return qcom_prep_bam_dma_desc_cmd(nandc, false, first, vaddr, - num_regs, flags); - - if (first == NAND_FLASH_CMD) - flow_control = true; - - return qcom_prep_adm_dma_desc(nandc, false, first, vaddr, - num_regs * sizeof(u32), flow_control); -} - -/* - * qcom_read_data_dma: prepares a DMA descriptor to transfer data from the - * controller's internal buffer to the buffer 'vaddr' - * - * @reg_off: offset within the controller's data buffer - * @vaddr: virtual address of the buffer we want to write to - * @size: DMA transaction size in bytes - * @flags: flags to control DMA descriptor preparation - */ -static int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off, - const u8 *vaddr, int size, unsigned int flags) -{ - if (nandc->props->supports_bam) - return qcom_prep_bam_dma_desc_data(nandc, true, vaddr, size, flags); - - return qcom_prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false); -} - -/* - * qcom_write_data_dma: prepares a DMA descriptor to transfer data from - * 'vaddr' to the controller's internal buffer - * - * @reg_off: offset within the controller's data buffer - * @vaddr: virtual address of the buffer we want to read from - * @size: DMA transaction size in bytes - * @flags: flags to control DMA descriptor preparation - */ -static int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off, - const u8 *vaddr, int size, unsigned int flags) -{ - if (nandc->props->supports_bam) - return qcom_prep_bam_dma_desc_data(nandc, false, vaddr, size, flags); - - return qcom_prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false); -} - /* * Helper to prepare DMA descriptors for configuring registers * before reading a NAND page. @@ -1262,83 +394,6 @@ static void config_nand_cw_write(struct nand_chip *chip) NAND_BAM_NEXT_SGL); } -/* helpers to submit/free our list of dma descriptors */ -static int qcom_submit_descs(struct qcom_nand_controller *nandc) -{ - struct desc_info *desc, *n; - dma_cookie_t cookie = 0; - struct bam_transaction *bam_txn = nandc->bam_txn; - int ret = 0; - - if (nandc->props->supports_bam) { - if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) { - ret = qcom_prepare_bam_async_desc(nandc, nandc->rx_chan, 0); - if (ret) - goto err_unmap_free_desc; - } - - if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) { - ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan, - DMA_PREP_INTERRUPT); - if (ret) - goto err_unmap_free_desc; - } - - if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { - ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan, - DMA_PREP_CMD); - if (ret) - goto err_unmap_free_desc; - } - } - - list_for_each_entry(desc, &nandc->desc_list, node) - cookie = dmaengine_submit(desc->dma_desc); - - if (nandc->props->supports_bam) { - bam_txn->last_cmd_desc->callback = qcom_qpic_bam_dma_done; - bam_txn->last_cmd_desc->callback_param = bam_txn; - - dma_async_issue_pending(nandc->tx_chan); - dma_async_issue_pending(nandc->rx_chan); - dma_async_issue_pending(nandc->cmd_chan); - - if (!wait_for_completion_timeout(&bam_txn->txn_done, - QPIC_NAND_COMPLETION_TIMEOUT)) - ret = -ETIMEDOUT; - } else { - if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) - ret = -ETIMEDOUT; - } - -err_unmap_free_desc: - /* - * Unmap the dma sg_list and free the desc allocated by both - * qcom_prepare_bam_async_desc() and qcom_prep_adm_dma_desc() functions. - */ - list_for_each_entry_safe(desc, n, &nandc->desc_list, node) { - list_del(&desc->node); - - if (nandc->props->supports_bam) - dma_unmap_sg(nandc->dev, desc->bam_sgl, - desc->sgl_cnt, desc->dir); - else - dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1, - desc->dir); - - kfree(desc); - } - - return ret; -} - -/* reset the register read buffer for next NAND operation */ -static void qcom_clear_read_regs(struct qcom_nand_controller *nandc) -{ - nandc->reg_read_pos = 0; - qcom_nandc_dev_to_mem(nandc, false); -} - /* * when using BCH ECC, the HW flags an error in NAND_FLASH_STATUS if it read * an erased CW, and reports an erased CW in NAND_ERASED_CW_DETECT_STATUS. @@ -2967,141 +2022,14 @@ static const struct nand_controller_ops qcom_nandc_ops = { .exec_op = qcom_nand_exec_op, }; -static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc) -{ - if (nandc->props->supports_bam) { - if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma)) - dma_unmap_single(nandc->dev, nandc->reg_read_dma, - MAX_REG_RD * - sizeof(*nandc->reg_read_buf), - DMA_FROM_DEVICE); - - if (nandc->tx_chan) - dma_release_channel(nandc->tx_chan); - - if (nandc->rx_chan) - dma_release_channel(nandc->rx_chan); - - if (nandc->cmd_chan) - dma_release_channel(nandc->cmd_chan); - } else { - if (nandc->chan) - dma_release_channel(nandc->chan); - } -} - -static int qcom_nandc_alloc(struct qcom_nand_controller *nandc) -{ - int ret; - - ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32)); - if (ret) { - dev_err(nandc->dev, "failed to set DMA mask\n"); - return ret; - } - - /* - * we use the internal buffer for reading ONFI params, reading small - * data like ID and status, and preforming read-copy-write operations - * when writing to a codeword partially. 532 is the maximum possible - * size of a codeword for our nand controller - */ - nandc->buf_size = 532; - - nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size, GFP_KERNEL); - if (!nandc->data_buffer) - return -ENOMEM; - - nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs), GFP_KERNEL); - if (!nandc->regs) - return -ENOMEM; - - nandc->reg_read_buf = devm_kcalloc(nandc->dev, MAX_REG_RD, - sizeof(*nandc->reg_read_buf), - GFP_KERNEL); - if (!nandc->reg_read_buf) - return -ENOMEM; - - if (nandc->props->supports_bam) { - nandc->reg_read_dma = - dma_map_single(nandc->dev, nandc->reg_read_buf, - MAX_REG_RD * - sizeof(*nandc->reg_read_buf), - DMA_FROM_DEVICE); - if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) { - dev_err(nandc->dev, "failed to DMA MAP reg buffer\n"); - return -EIO; - } - - nandc->tx_chan = dma_request_chan(nandc->dev, "tx"); - if (IS_ERR(nandc->tx_chan)) { - ret = PTR_ERR(nandc->tx_chan); - nandc->tx_chan = NULL; - dev_err_probe(nandc->dev, ret, - "tx DMA channel request failed\n"); - goto unalloc; - } - - nandc->rx_chan = dma_request_chan(nandc->dev, "rx"); - if (IS_ERR(nandc->rx_chan)) { - ret = PTR_ERR(nandc->rx_chan); - nandc->rx_chan = NULL; - dev_err_probe(nandc->dev, ret, - "rx DMA channel request failed\n"); - goto unalloc; - } - - nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd"); - if (IS_ERR(nandc->cmd_chan)) { - ret = PTR_ERR(nandc->cmd_chan); - nandc->cmd_chan = NULL; - dev_err_probe(nandc->dev, ret, - "cmd DMA channel request failed\n"); - goto unalloc; - } - - /* - * Initially allocate BAM transaction to read ONFI param page. - * After detecting all the devices, this BAM transaction will - * be freed and the next BAM transaction will be allocated with - * maximum codeword size - */ - nandc->max_cwperpage = 1; - nandc->bam_txn = qcom_alloc_bam_transaction(nandc); - if (!nandc->bam_txn) { - dev_err(nandc->dev, - "failed to allocate bam transaction\n"); - ret = -ENOMEM; - goto unalloc; - } - } else { - nandc->chan = dma_request_chan(nandc->dev, "rxtx"); - if (IS_ERR(nandc->chan)) { - ret = PTR_ERR(nandc->chan); - nandc->chan = NULL; - dev_err_probe(nandc->dev, ret, - "rxtx DMA channel request failed\n"); - return ret; - } - } - - INIT_LIST_HEAD(&nandc->desc_list); - INIT_LIST_HEAD(&nandc->host_list); - - nand_controller_init(&nandc->controller); - nandc->controller.ops = &qcom_nandc_ops; - - return 0; -unalloc: - qcom_nandc_unalloc(nandc); - return ret; -} - /* one time setup of a few nand controller registers */ static int qcom_nandc_setup(struct qcom_nand_controller *nandc) { u32 nand_ctrl; + nand_controller_init(nandc->controller); + nandc->controller->ops = &qcom_nandc_ops; + /* kill onenand */ if (!nandc->props->nandc_part_of_qpic) nandc_write(nandc, SFLASHC_BURST_CFG, 0); @@ -3240,7 +2168,7 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, chip->legacy.block_bad = qcom_nandc_block_bad; chip->legacy.block_markbad = qcom_nandc_block_markbad; - chip->controller = &nandc->controller; + chip->controller = nandc->controller; chip->options |= NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA | NAND_SKIP_BBTSCAN; @@ -3323,17 +2251,21 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) static int qcom_nandc_probe(struct platform_device *pdev) { struct qcom_nand_controller *nandc; + struct nand_controller *controller; const void *dev_data; struct device *dev = &pdev->dev; struct resource *res; int ret; - nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL); + nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc) + sizeof(*controller), + GFP_KERNEL); if (!nandc) return -ENOMEM; + controller = (struct nand_controller *)&nandc[1]; platform_set_drvdata(pdev, nandc); nandc->dev = dev; + nandc->controller = controller; dev_data = of_device_get_match_data(dev); if (!dev_data) { diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h new file mode 100644 index 000000000000..425994429387 --- /dev/null +++ b/include/linux/mtd/nand-qpic-common.h @@ -0,0 +1,468 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * QCOM QPIC common APIs header file + * + * Copyright (c) 2023 Qualcomm Inc. + * Authors: Md sadre Alam + * + */ +#ifndef __MTD_NAND_QPIC_COMMON_H__ +#define __MTD_NAND_QPIC_COMMON_H__ + +/* NANDc reg offsets */ +#define NAND_FLASH_CMD 0x00 +#define NAND_ADDR0 0x04 +#define NAND_ADDR1 0x08 +#define NAND_FLASH_CHIP_SELECT 0x0c +#define NAND_EXEC_CMD 0x10 +#define NAND_FLASH_STATUS 0x14 +#define NAND_BUFFER_STATUS 0x18 +#define NAND_DEV0_CFG0 0x20 +#define NAND_DEV0_CFG1 0x24 +#define NAND_DEV0_ECC_CFG 0x28 +#define NAND_AUTO_STATUS_EN 0x2c +#define NAND_DEV1_CFG0 0x30 +#define NAND_DEV1_CFG1 0x34 +#define NAND_READ_ID 0x40 +#define NAND_READ_STATUS 0x44 +#define NAND_DEV_CMD0 0xa0 +#define NAND_DEV_CMD1 0xa4 +#define NAND_DEV_CMD2 0xa8 +#define NAND_DEV_CMD_VLD 0xac +#define SFLASHC_BURST_CFG 0xe0 +#define NAND_ERASED_CW_DETECT_CFG 0xe8 +#define NAND_ERASED_CW_DETECT_STATUS 0xec +#define NAND_EBI2_ECC_BUF_CFG 0xf0 +#define FLASH_BUF_ACC 0x100 + +#define NAND_CTRL 0xf00 +#define NAND_VERSION 0xf08 +#define NAND_READ_LOCATION_0 0xf20 +#define NAND_READ_LOCATION_1 0xf24 +#define NAND_READ_LOCATION_2 0xf28 +#define NAND_READ_LOCATION_3 0xf2c +#define NAND_READ_LOCATION_LAST_CW_0 0xf40 +#define NAND_READ_LOCATION_LAST_CW_1 0xf44 +#define NAND_READ_LOCATION_LAST_CW_2 0xf48 +#define NAND_READ_LOCATION_LAST_CW_3 0xf4c + +/* dummy register offsets, used by qcom_write_reg_dma */ +#define NAND_DEV_CMD1_RESTORE 0xdead +#define NAND_DEV_CMD_VLD_RESTORE 0xbeef + +/* NAND_FLASH_CMD bits */ +#define PAGE_ACC BIT(4) +#define LAST_PAGE BIT(5) + +/* NAND_FLASH_CHIP_SELECT bits */ +#define NAND_DEV_SEL 0 +#define DM_EN BIT(2) + +/* NAND_FLASH_STATUS bits */ +#define FS_OP_ERR BIT(4) +#define FS_READY_BSY_N BIT(5) +#define FS_MPU_ERR BIT(8) +#define FS_DEVICE_STS_ERR BIT(16) +#define FS_DEVICE_WP BIT(23) + +/* NAND_BUFFER_STATUS bits */ +#define BS_UNCORRECTABLE_BIT BIT(8) +#define BS_CORRECTABLE_ERR_MSK 0x1f + +/* NAND_DEVn_CFG0 bits */ +#define DISABLE_STATUS_AFTER_WRITE 4 +#define CW_PER_PAGE 6 +#define UD_SIZE_BYTES 9 +#define UD_SIZE_BYTES_MASK GENMASK(18, 9) +#define ECC_PARITY_SIZE_BYTES_RS 19 +#define SPARE_SIZE_BYTES 23 +#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23) +#define NUM_ADDR_CYCLES 27 +#define STATUS_BFR_READ 30 +#define SET_RD_MODE_AFTER_STATUS 31 + +/* NAND_DEVn_CFG0 bits */ +#define DEV0_CFG1_ECC_DISABLE 0 +#define WIDE_FLASH 1 +#define NAND_RECOVERY_CYCLES 2 +#define CS_ACTIVE_BSY 5 +#define BAD_BLOCK_BYTE_NUM 6 +#define BAD_BLOCK_IN_SPARE_AREA 16 +#define WR_RD_BSY_GAP 17 +#define ENABLE_BCH_ECC 27 + +/* NAND_DEV0_ECC_CFG bits */ +#define ECC_CFG_ECC_DISABLE 0 +#define ECC_SW_RESET 1 +#define ECC_MODE 4 +#define ECC_PARITY_SIZE_BYTES_BCH 8 +#define ECC_NUM_DATA_BYTES 16 +#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16) +#define ECC_FORCE_CLK_OPEN 30 + +/* NAND_DEV_CMD1 bits */ +#define READ_ADDR 0 + +/* NAND_DEV_CMD_VLD bits */ +#define READ_START_VLD BIT(0) +#define READ_STOP_VLD BIT(1) +#define WRITE_START_VLD BIT(2) +#define ERASE_START_VLD BIT(3) +#define SEQ_READ_START_VLD BIT(4) + +/* NAND_EBI2_ECC_BUF_CFG bits */ +#define NUM_STEPS 0 + +/* NAND_ERASED_CW_DETECT_CFG bits */ +#define ERASED_CW_ECC_MASK 1 +#define AUTO_DETECT_RES 0 +#define MASK_ECC BIT(ERASED_CW_ECC_MASK) +#define RESET_ERASED_DET BIT(AUTO_DETECT_RES) +#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES) +#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC) +#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC) + +/* NAND_ERASED_CW_DETECT_STATUS bits */ +#define PAGE_ALL_ERASED BIT(7) +#define CODEWORD_ALL_ERASED BIT(6) +#define PAGE_ERASED BIT(5) +#define CODEWORD_ERASED BIT(4) +#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED) +#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) + +/* NAND_READ_LOCATION_n bits */ +#define READ_LOCATION_OFFSET 0 +#define READ_LOCATION_SIZE 16 +#define READ_LOCATION_LAST 31 + +/* Version Mask */ +#define NAND_VERSION_MAJOR_MASK 0xf0000000 +#define NAND_VERSION_MAJOR_SHIFT 28 +#define NAND_VERSION_MINOR_MASK 0x0fff0000 +#define NAND_VERSION_MINOR_SHIFT 16 + +/* NAND OP_CMDs */ +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PAGE_READ_ONFI_READ 0x5 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_CHECK_STATUS 0xc +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd + +/* Default Value for NAND_DEV_CMD_VLD */ +#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ + ERASE_START_VLD | SEQ_READ_START_VLD) + +/* NAND_CTRL bits */ +#define BAM_MODE_EN BIT(0) + +/* + * the NAND controller performs reads/writes with ECC in 516 byte chunks. + * the driver calls the chunks 'step' or 'codeword' interchangeably + */ +#define NANDC_STEP_SIZE 512 + +/* + * the largest page size we support is 8K, this will have 16 steps/codewords + * of 512 bytes each + */ +#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE) + +/* we read at most 3 registers per codeword scan */ +#define MAX_REG_RD (3 * MAX_NUM_STEPS) + +/* ECC modes supported by the controller */ +#define ECC_NONE BIT(0) +#define ECC_RS_4BIT BIT(1) +#define ECC_BCH_4BIT BIT(2) +#define ECC_BCH_8BIT BIT(3) + +/* + * Returns the actual register address for all NAND_DEV_ registers + * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD) + */ +#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) + +/* Returns the NAND register physical address */ +#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) + +/* Returns the dma address for reg read buffer */ +#define reg_buf_dma_addr(chip, vaddr) \ + ((chip)->reg_read_dma + \ + ((u8 *)(vaddr) - (u8 *)(chip)->reg_read_buf)) + +#define QPIC_PER_CW_CMD_ELEMENTS 32 +#define QPIC_PER_CW_CMD_SGL 32 +#define QPIC_PER_CW_DATA_SGL 8 + +#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000) + +/* + * Flags used in DMA descriptor preparation helper functions + * (i.e. qcom_read_reg_dma/qcom_write_reg_dma/qcom_read_data_dma/qcom_write_data_dma) + */ +/* Don't set the EOT in current tx BAM sgl */ +#define NAND_BAM_NO_EOT BIT(0) +/* Set the NWD flag in current BAM sgl */ +#define NAND_BAM_NWD BIT(1) +/* Finish writing in the current BAM sgl and start writing in another BAM sgl */ +#define NAND_BAM_NEXT_SGL BIT(2) +/* + * Erased codeword status is being used two times in single transfer so this + * flag will determine the current value of erased codeword status register + */ +#define NAND_ERASED_CW_SET BIT(4) + +#define MAX_ADDRESS_CYCLE 5 + +/* + * This data type corresponds to the BAM transaction which will be used for all + * NAND transfers. + * @bam_ce - the array of BAM command elements + * @cmd_sgl - sgl for NAND BAM command pipe + * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @last_data_desc - last DMA desc in data channel (tx/rx). + * @last_cmd_desc - last DMA desc in command channel. + * @txn_done - completion for NAND transfer. + * @bam_ce_pos - the index in bam_ce which is available for next sgl + * @bam_ce_start - the index in bam_ce which marks the start position ce + * for current sgl. It will be used for size calculation + * for current sgl + * @cmd_sgl_pos - current index in command sgl. + * @cmd_sgl_start - start index in command sgl. + * @tx_sgl_pos - current index in data sgl for tx. + * @tx_sgl_start - start index in data sgl for tx. + * @rx_sgl_pos - current index in data sgl for rx. + * @rx_sgl_start - start index in data sgl for rx. + */ +struct bam_transaction { + struct bam_cmd_element *bam_ce; + struct scatterlist *cmd_sgl; + struct scatterlist *data_sgl; + struct dma_async_tx_descriptor *last_data_desc; + struct dma_async_tx_descriptor *last_cmd_desc; + struct completion txn_done; + u32 bam_ce_pos; + u32 bam_ce_start; + u32 cmd_sgl_pos; + u32 cmd_sgl_start; + u32 tx_sgl_pos; + u32 tx_sgl_start; + u32 rx_sgl_pos; + u32 rx_sgl_start; +}; + +/* + * This data type corresponds to the nand dma descriptor + * @dma_desc - low level DMA engine descriptor + * @list - list for desc_info + * + * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by + * ADM + * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM + * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM + * @dir - DMA transfer direction + */ +struct desc_info { + struct dma_async_tx_descriptor *dma_desc; + struct list_head node; + + union { + struct scatterlist adm_sgl; + struct { + struct scatterlist *bam_sgl; + int sgl_cnt; + }; + }; + enum dma_data_direction dir; +}; + +/* + * holds the current register values that we want to write. acts as a contiguous + * chunk of memory which we use to write the controller registers through DMA. + */ +struct nandc_regs { + __le32 cmd; + __le32 addr0; + __le32 addr1; + __le32 chip_sel; + __le32 exec; + + __le32 cfg0; + __le32 cfg1; + __le32 ecc_bch_cfg; + + __le32 clrflashstatus; + __le32 clrreadstatus; + + __le32 cmd1; + __le32 vld; + + __le32 orig_cmd1; + __le32 orig_vld; + + __le32 ecc_buf_cfg; + __le32 read_location0; + __le32 read_location1; + __le32 read_location2; + __le32 read_location3; + __le32 read_location_last0; + __le32 read_location_last1; + __le32 read_location_last2; + __le32 read_location_last3; + + __le32 erased_cw_detect_cfg_clr; + __le32 erased_cw_detect_cfg_set; +}; + +/* + * NAND controller data struct + * + * @dev: parent device + * + * @base: MMIO base + * + * @core_clk: controller clock + * @aon_clk: another controller clock + * + * @regs: a contiguous chunk of memory for DMA register + * writes. contains the register values to be + * written to controller + * + * @props: properties of current NAND controller, + * initialized via DT match data + * + * @controller: base controller structure + * @host_list: list containing all the chips attached to the + * controller + * + * @chan: dma channel + * @cmd_crci: ADM DMA CRCI for command flow control + * @data_crci: ADM DMA CRCI for data flow control + * + * @desc_list: DMA descriptor list (list of desc_infos) + * + * @data_buffer: our local DMA buffer for page read/writes, + * used when we can't use the buffer provided + * by upper layers directly + * @reg_read_buf: local buffer for reading back registers via DMA + * + * @base_phys: physical base address of controller registers + * @base_dma: dma base address of controller registers + * @reg_read_dma: contains dma address for register read buffer + * + * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf + * functions + * @max_cwperpage: maximum QPIC codewords required. calculated + * from all connected NAND devices pagesize + * + * @reg_read_pos: marker for data read in reg_read_buf + * + * @cmd1/vld: some fixed controller register values + * + * @exec_opwrite: flag to select correct number of code word + * while reading status + */ +struct qcom_nand_controller { + struct device *dev; + + void __iomem *base; + + struct clk *core_clk; + struct clk *aon_clk; + + struct nandc_regs *regs; + struct bam_transaction *bam_txn; + + const struct qcom_nandc_props *props; + + struct nand_controller *controller; + struct list_head host_list; + + union { + /* will be used only by QPIC for BAM DMA */ + struct { + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; + struct dma_chan *cmd_chan; + }; + + /* will be used only by EBI2 for ADM DMA */ + struct { + struct dma_chan *chan; + unsigned int cmd_crci; + unsigned int data_crci; + }; + }; + + struct list_head desc_list; + + u8 *data_buffer; + __le32 *reg_read_buf; + + phys_addr_t base_phys; + dma_addr_t base_dma; + dma_addr_t reg_read_dma; + + int buf_size; + int buf_count; + int buf_start; + unsigned int max_cwperpage; + + int reg_read_pos; + + u32 cmd1, vld; + bool exec_opwrite; +}; + +/* + * This data type corresponds to the NAND controller properties which varies + * among different NAND controllers. + * @ecc_modes - ecc mode for NAND + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset + * @supports_bam - whether NAND controller is using BAM + * @nandc_part_of_qpic - whether NAND controller is part of qpic IP + * @qpic_version2 - flag to indicate QPIC IP version 2 + * @use_codeword_fixup - whether NAND has different layout for boot partitions + */ +struct qcom_nandc_props { + u32 ecc_modes; + u32 dev_cmd_reg_start; + bool supports_bam; + bool nandc_part_of_qpic; + bool qpic_version2; + bool use_codeword_fixup; +}; + +void qcom_free_bam_transaction(struct qcom_nand_controller *nandc); +struct bam_transaction *qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc); +void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc); +void qcom_qpic_bam_dma_done(void *data); +void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu); +int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc, + struct dma_chan *chan, unsigned long flags); +int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, int size, unsigned int flags); +int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read, + const void *vaddr, int size, unsigned int flags); +int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, int reg_off, + const void *vaddr, int size, bool flow_control); +int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first, int num_regs, + unsigned int flags); +int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr, int first, + int num_regs, unsigned int flags); +int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off, const u8 *vaddr, + int size, unsigned int flags); +int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off, const u8 *vaddr, + int size, unsigned int flags); +int qcom_submit_descs(struct qcom_nand_controller *nandc); +void qcom_clear_read_regs(struct qcom_nand_controller *nandc); +void qcom_nandc_unalloc(struct qcom_nand_controller *nandc); +int qcom_nandc_alloc(struct qcom_nand_controller *nandc); +#endif +