@@ -3866,6 +3866,90 @@ usb_2_hsphy: phy@88e0000 {
status = "disabled";
};
+ usb_mp_hsphy0: phy@88e1000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e1000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB3_MP0_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@88e2000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e2000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB3_MP1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy0: phy@88e3000 {
+ compatible = "qcom,x1e80100-qmp-usb3-uni-phy";
+ reg = <0 0x088e3000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb_mp_phy0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@88e5000 {
+ compatible = "qcom,x1e80100-qmp-usb3-uni-phy";
+ reg = <0 0x088e5000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb_mp_phy1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
usb_1_ss2: usb@a0f8800 {
compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
reg = <0 0x0a0f8800 0 0x400>;
@@ -4040,6 +4124,92 @@ usb_2_dwc3_hs: endpoint {
};
};
+ usb_mp: usb@a4f8800 {
+ compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 52 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 51 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 54 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 53 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 55 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "hs_phy_1", "hs_phy_2",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc GCC_USB30_MP_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_mp_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x1400 0x0>;
+
+ phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0", "usb3-0",
+ "usb2-1", "usb3-1";
+ dr_mode = "host";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+
+ dma-coherent;
+ };
+ };
+
usb_1_ss0: usb@a6f8800 {
compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;