diff mbox series

[v3,3/8] ASoC: msm8916-wcd-analog: add pm8950 codec

Message ID 20240731-msm8953-msm8976-asoc-v3-3-163f23c3a28d@gmail.com
State New
Headers show
Series [v3,1/8] ASoC: qcom: apq8016_sbc.c: Add Quinary support | expand

Commit Message

Adam Skladowski July 31, 2024, 3:25 p.m. UTC
Add regs overrides for PM8950 codec and implement matching reg overrides
via compatible.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 sound/soc/codecs/msm8916-wcd-analog.c | 52 ++++++++++++++++++++++++++++++++---
 1 file changed, 48 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 9ca381812975..13df60409857 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -232,6 +232,8 @@ 
 #define RX_EAR_CTL_PA_SEL_MASK			BIT(7)
 #define RX_EAR_CTL_PA_SEL			BIT(7)
 
+#define CDC_A_RX_EAR_STATUS		(0xf1A1)
+
 #define CDC_A_SPKR_DAC_CTL		(0xf1B0)
 #define SPKR_DAC_CTL_DAC_RESET_MASK	BIT(4)
 #define SPKR_DAC_CTL_DAC_RESET_NORMAL	0
@@ -250,6 +252,7 @@ 
 		SPKR_DRV_CAL_EN | SPKR_DRV_SETTLE_EN | \
 		SPKR_DRV_FW_EN | SPKR_DRV_BOOST_SET | \
 		SPKR_DRV_CMFB_SET | SPKR_DRV_GAIN_SET)
+#define CDC_A_SPKR_ANA_BIAS_SET		(0xf1B3)
 #define CDC_A_SPKR_OCP_CTL		(0xf1B4)
 #define CDC_A_SPKR_PWRSTG_CTL		(0xf1B5)
 #define SPKR_PWRSTG_CTL_DAC_EN_MASK	BIT(0)
@@ -264,6 +267,7 @@ 
 
 #define CDC_A_SPKR_DRV_DBG		(0xf1B7)
 #define CDC_A_CURRENT_LIMIT		(0xf1C0)
+#define CDC_A_BYPASS_MODE		(0xf1C2)
 #define CDC_A_BOOST_EN_CTL		(0xf1C3)
 #define CDC_A_SLOPE_COMP_IP_ZERO	(0xf1C4)
 #define CDC_A_SEC_ACCESS		(0xf1D0)
@@ -286,6 +290,11 @@  static const char * const supply_names[] = {
 
 #define MBHC_MAX_BUTTONS	(5)
 
+struct wcd_reg_seq {
+	const struct reg_default *seq;
+	int seq_size;
+};
+
 struct pm8916_wcd_analog_priv {
 	u16 pmic_rev;
 	u16 codec_version;
@@ -715,9 +724,41 @@  static const struct reg_default wcd_reg_defaults_2_0[] = {
 	{CDC_A_MASTER_BIAS_CTL, 0x30},
 };
 
+static const struct wcd_reg_seq pm8916_data = {
+	.seq = wcd_reg_defaults_2_0,
+	.seq_size = ARRAY_SIZE(wcd_reg_defaults_2_0),
+};
+
+static const struct reg_default wcd_reg_defaults_pm8950[] = {
+	{CDC_A_RX_COM_OCP_CTL, 0xd1},
+	{CDC_A_RX_COM_OCP_COUNT, 0xff},
+	{CDC_D_SEC_ACCESS, 0xa5},
+	{CDC_D_PERPH_RESET_CTL3, 0x0f},
+	{CDC_A_TX_1_2_OPAMP_BIAS, 0x4c},
+	{CDC_A_NCP_FBCTRL, 0xa8},
+	{CDC_A_NCP_VCTRL, 0xa4},
+	{CDC_A_SPKR_DRV_CTL, 0x69},
+	{CDC_A_SPKR_DRV_DBG, 0x01},
+	{CDC_A_SEC_ACCESS, 0xa5},
+	{CDC_A_PERPH_RESET_CTL3, 0x0f},
+	{CDC_A_CURRENT_LIMIT, 0x82},
+	{CDC_A_SPKR_ANA_BIAS_SET, 0x41},
+	{CDC_A_SPKR_DAC_CTL, 0x03},
+	{CDC_A_SPKR_OCP_CTL, 0xe1},
+	{CDC_A_RX_HPH_BIAS_PA, 0xfa},
+	{CDC_A_MASTER_BIAS_CTL, 0x30},
+	{CDC_A_MICB_1_INT_RBIAS, 0x00},
+};
+
+static const struct wcd_reg_seq pm8950_data = {
+	.seq = wcd_reg_defaults_pm8950,
+	.seq_size = ARRAY_SIZE(wcd_reg_defaults_pm8950),
+};
+
 static int pm8916_wcd_analog_probe(struct snd_soc_component *component)
 {
 	struct pm8916_wcd_analog_priv *priv = dev_get_drvdata(component->dev);
+	const struct wcd_reg_seq *wcd_reg_init_data;
 	int err, reg;
 
 	err = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
@@ -738,9 +779,11 @@  static int pm8916_wcd_analog_probe(struct snd_soc_component *component)
 	snd_soc_component_write(component, CDC_D_PERPH_RESET_CTL4, 0x01);
 	snd_soc_component_write(component, CDC_A_PERPH_RESET_CTL4, 0x01);
 
-	for (reg = 0; reg < ARRAY_SIZE(wcd_reg_defaults_2_0); reg++)
-		snd_soc_component_write(component, wcd_reg_defaults_2_0[reg].reg,
-			      wcd_reg_defaults_2_0[reg].def);
+	wcd_reg_init_data = of_device_get_match_data(component->dev);
+
+	for (reg = 0; reg < wcd_reg_init_data->seq_size; reg++)
+		snd_soc_component_write(component, wcd_reg_init_data->seq[reg].reg,
+					wcd_reg_init_data->seq[reg].def);
 
 	priv->component = component;
 
@@ -1259,7 +1302,8 @@  static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id pm8916_wcd_analog_spmi_match_table[] = {
-	{ .compatible = "qcom,pm8916-wcd-analog-codec", },
+	{ .compatible = "qcom,pm8916-wcd-analog-codec", .data = &pm8916_data },
+	{ .compatible = "qcom,pm8950-wcd-analog-codec", .data = &pm8950_data },
 	{ }
 };