diff mbox series

[01/13] dt-bindings: mfd: pm8008: add reset gpio

Message ID 20240506150830.23709-2-johan+linaro@kernel.org
State Superseded
Headers show
Series arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic | expand

Commit Message

Johan Hovold May 6, 2024, 3:08 p.m. UTC 
Describe the optional reset gpio (which may not be wired up).

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Krzysztof Kozlowski May 7, 2024, 6:38 a.m. UTC | #1 
On 06/05/2024 17:08, Johan Hovold wrote:
> Describe the optional reset gpio (which may not be wired up).
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Stephen Boyd May 8, 2024, 9:39 p.m. UTC | #2 
Quoting Johan Hovold (2024-05-06 08:08:18)
> Describe the optional reset gpio (which may not be wired up).
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Linus Walleij May 27, 2024, 1:32 p.m. UTC | #3 
On Mon, May 6, 2024 at 5:10 PM Johan Hovold <johan+linaro@kernel.org> wrote:

> Describe the optional reset gpio (which may not be wired up).
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 0c75d8bde568..e1e05921afb4 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -29,6 +29,9 @@  properties:
 
     description: Parent interrupt.
 
+  reset-gpios:
+    maxItems: 1
+
   "#interrupt-cells":
     const: 2
 
@@ -97,6 +100,7 @@  additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
@@ -115,6 +119,8 @@  examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
+        reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
         pm8008_gpios: gpio@c000 {
           compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;