From patchwork Mon May 6 15:08:30 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Johan Hovold X-Patchwork-Id: 795308 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9B0591553A1; Mon, 6 May 2024 15:10:15 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715008215; cv=none; b=G6OdAicANh6mwJXKKpOAMRba3VioAGbuCXsppMcJJLy73vbsRYaoz+YLGiebvYkqdsNaZPyeFkXPXEvElx6AQL0B6i0BEQlcKoadxqrLBizPm8yottO+3/OOZl3Rb6qpmEaO7UrMrhItj8X3q5kfLCyNlU+dGrWoMeiZDj8rVBo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715008215; c=relaxed/simple; bh=1Ss/oHL8DEJVMJndnNCdr7e+QS596xFOusjHOLUImeU=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=dsocq93Xpimm9pwbXbcv+leFFamDuW+L0HSkT3Ff54xUWjk+4jBGCFf5ATE3I19z4BKyg9wYPJLBIOXh3ywAlUZ8OpMpT6wT2KM204UZxRfggBln1Bg92KBHOzP7u3dpZne8d7rXDl7rQu9TtzfLL5VEuzofzPBhz817HgFboXo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=tkJxPXQ7; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="tkJxPXQ7" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 47245C4DDE6; Mon, 6 May 2024 15:10:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1715008215; bh=1Ss/oHL8DEJVMJndnNCdr7e+QS596xFOusjHOLUImeU=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=tkJxPXQ7t7k2y/coMRTsM8D8WGEMYlVFz4H5Lb6MAqLUuiDDKdSghPYvEer6IndfJ egGqcsFqyKcIO8kwWpoBwYK2NM65lqJcVEQRIBwSQI8bjySwdiVH49+ROEW6YiXGYa tBBQeIttkzFmQQkAT5+FkqOonOfHXC+YZFtxXSv6xRIHx4XY1UvYMcW5o1RDe5yHZX WAlsRh7V8W00zQxyJzuxRcvfmzws+gnILPwsXrEBg+z7QU20L888i8jZblMDKEh2ng rxhxyVixM7PJCK0b9rQS+mvWC/yz5zZ8CLu0e0+dnUHAmMy6TE8ON/O6c3S0VxcPVT Zo9MgFOGj44VQ== Received: from johan by xi.lan with local (Exim 4.97.1) (envelope-from ) id 1s3zyq-000000006Cg-3uHl; Mon, 06 May 2024 17:10:16 +0200 From: Johan Hovold To: Lee Jones , Mark Brown , Linus Walleij , Bjorn Andersson Cc: Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Das Srinagesh , Satya Priya , Stephen Boyd , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Johan Hovold Subject: [PATCH 13/13] arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic Date: Mon, 6 May 2024 17:08:30 +0200 Message-ID: <20240506150830.23709-14-johan+linaro@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240506150830.23709-1-johan+linaro@kernel.org> References: <20240506150830.23709-1-johan+linaro@kernel.org> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Enable the PM8008 PMIC which is used to power the camera sensors. Signed-off-by: Johan Hovold Reviewed-by: Bryan O'Donoghue Tested-by: Bryan O'Donoghue --- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 98c1b75513be..78d85e722ab1 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -295,6 +295,27 @@ linux,cma { }; thermal-zones { + pm8008-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + skin-temp-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -669,6 +690,85 @@ touchscreen@10 { }; }; +&i2c11 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_default>; + + status = "okay"; + + pm8008: pmic@c { + compatible = "qcom,pm8008"; + reg = <0xc>; + + interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd_l1_l2-supply = <&vreg_s11b>; + vdd_l3_l4-supply = <&vreg_bob>; + vdd_l5-supply = <&vreg_bob>; + vdd_l6-supply = <&vreg_bob>; + vdd_l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1q: ldo1 { + regulator-name = "vreg_l1q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2q: ldo2 { + regulator-name = "vreg_l2q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3q: ldo3 { + regulator-name = "vreg_l3q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4q: ldo4 { + regulator-name = "vreg_l4q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l5q: ldo5 { + regulator-name = "vreg_l5q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6q: ldo6 { + regulator-name = "vreg_l6q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7q: ldo7 { + regulator-name = "vreg_l7q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -1367,6 +1467,13 @@ i2c4_default: i2c4-default-state { bias-disable; }; + i2c11_default: i2c11-default-state { + pins = "gpio18", "gpio19"; + function = "qup11"; + drive-strength = <16>; + bias-disable; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -1470,6 +1577,22 @@ wake-n-pins { }; }; + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio41"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { perst-n-pins { pins = "gpio178";