diff mbox series

[2/7] ARM: dts: qcom: msm8974: Use mboxes properties for APCS

Message ID 20240424-apcs-mboxes-v1-2-6556c47cb501@z3ntu.xyz
State Accepted
Commit d904c09b73fe9b0503e94f1c013d962e87a08123
Headers show
Series Use mboxes instead of syscon for APCS (arm32 & arm64) | expand

Commit Message

Luca Weiss April 24, 2024, 4:23 p.m. UTC 
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Konrad Dybcio April 24, 2024, 8:13 p.m. UTC | #1 
On 4/24/24 18:23, Luca Weiss wrote:
> Instead of passing the syscon to the various nodes, use the mbox
> interface using the mboxes property.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 20958c47ff3a..0f1dc4355c7a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -130,7 +130,7 @@  master-stats {
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -217,7 +217,7 @@  smp2p-adsp {
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -242,7 +242,7 @@  smp2p-modem {
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -267,7 +267,7 @@  smp2p-wcnss {
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -757,7 +757,7 @@  iris {
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 
 				wcnss {
@@ -1576,7 +1576,7 @@  bam_dmux: bam-dmux {
 			smd-edge {
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,smd-edge = <0>;
 
 				label = "modem";
@@ -2213,7 +2213,7 @@  remoteproc_adsp: remoteproc@fe200000 {
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 8>;
+				mboxes = <&apcs 8>;
 				qcom,smd-edge = <1>;
 				label = "lpass";
 			};