diff mbox series

[v2,2/3] arm64: dts: qcom: msm8996: add glink-edge nodes

Message ID 20240418-msm8996-remoteproc-v2-2-b9ae852bf6bc@linaro.org
State New
Headers show
Series arm64: dts: qcom: msm8996: enable fastrpc and glink-edge | expand

Commit Message

Dmitry Baryshkov April 18, 2024, 6:44 a.m. UTC 
MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:

modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0

adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 1601e46549e7..7ae499fa7d91 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2453,6 +2453,13 @@  slpi_pil: remoteproc@1c00000 {
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
 
@@ -2522,6 +2529,13 @@  metadata {
 				memory-region = <&mdata_mem>;
 			};
 
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 
@@ -3467,6 +3481,14 @@  adsp_pil: remoteproc@9300000 {
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+
+
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;