| Message ID | 20240416182005.75422-9-quic_ajipan@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | clk: qcom: Add support for DISPCC, CAMCC and GPUCC on SM4450 | expand |
On 16.04.2024 8:20 PM, Ajit Pandey wrote: > Add device node for camera, display and graphics clock controller on > Qualcomm SM4450 platform. > > Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sm4450.dtsi | 35 ++++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi > index 603c962661cc..c78b793f5d6a 100644 > --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi > @@ -364,6 +364,41 @@ gcc: clock-controller@100000 { > <0>; > }; > > + camcc: clock-controller@ade0000 { > + compatible = "qcom,sm4450-camcc"; > + reg = <0x0 0xade0000 0x0 0x20000>; Please keep the non-zero address part padded to 8 hex digits > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_CAMERA_AHB_CLK>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > + dispcc: clock-controller@af00000 { > + compatible = "qcom,sm4450-dispcc"; > + reg = <0 0x0af00000 0 0x20000>; You used 0x0 above and 0 here.. Consistency is key! :P Konrad
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index 603c962661cc..c78b793f5d6a 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -364,6 +364,41 @@ gcc: clock-controller@100000 { <0>; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm4450-camcc"; + reg = <0x0 0xade0000 0x0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm4450-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm4450-gpucc"; + reg = <0 0x3d90000 0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + qupv3_id_0: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x2000>;
Add device node for camera, display and graphics clock controller on Qualcomm SM4450 platform. Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com> --- arch/arm64/boot/dts/qcom/sm4450.dtsi | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)