From patchwork Fri Nov 24 09:20:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 746849 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="ImBvoVHk" Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5DA3510C9 for ; Fri, 24 Nov 2023 01:20:58 -0800 (PST) Received: by mail-wr1-x436.google.com with SMTP id ffacd0b85a97d-332e40315bdso840797f8f.1 for ; Fri, 24 Nov 2023 01:20:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700817657; x=1701422457; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=qh57jYizUR6T9htWz0tIFyEV74zQHcgKpTBHSCa9cik=; b=ImBvoVHkBNg4bzE5T6N+gdfKydUeauOgmksrNUQWEOlTe8q7A98tAxFywpdAYu66Zl Blq0AujT3yZhIvXUnXt+oROgqn0KL2NZFR4mWtzRdbYsGgFvHeOpm/Gm0kZv5CoUV8TC k6AG2CxVSdYqQQFuwY/U00gi484ZrGQNJ7d3Wf1bFvesTGHqD94g8qd4CnQSMWBAOcOi dTGMMBRU3L9T40d1BTO99B5ckpX+3EfmqWbODzbBgHk3MwJ4WYOzeQwgU7JaZ7t4dBXO 6i0uanilSG+RzSUss8zac0s5lEaSgM2bwfEo55/pIGWN4uLU4LBQXO+vwJDxUMTLVjhw 2T0Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700817657; x=1701422457; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qh57jYizUR6T9htWz0tIFyEV74zQHcgKpTBHSCa9cik=; b=oGxxtJYk7R/bqNpFjbFMEguduTvZMZJUUtlIkfwTVwarO2zzi5rbvVueVJrheXD2nG Ml/PQA+9KXmooqaJjbummyNeVlSLcRdXOzKPJi147O8Of46ureCuWFqR+DEquzLmu8Bs uy0TLFvqD+thYjSp8SpKkS1UJQaw20RXWwi0zygnTOVqXN8GhEfsny7Vfz9iYXpY8gZ+ IFH80WbRG5vFHECe+UCsundflbXa1awTBHtO9/V9HF1NyjZw4/K6ycUUC4CtxJ401Myi +EhX2a9GvuYZoIKXLu7O2X4uA8DvDa9pAHE4H2cV8BHGm7T6PQ4+RQbxA6Az6wiby1N6 qMtQ== X-Gm-Message-State: AOJu0YzGTS/DlWI6QX+exL1TGarXbevP+ahoY4pD9zipEEf6KgGSacpw WGsiTrUjs2UHoihI6LWBo8Q9og== X-Google-Smtp-Source: AGHT+IHE9M9mC7eD0R7Y2GDrv+D+QNtcI27tqx5RX0gWWEfwQilLN9u9+1mzX6MGQZ71fQ07r9pMqQ== X-Received: by 2002:a5d:43d2:0:b0:32d:9f1b:3a1f with SMTP id v18-20020a5d43d2000000b0032d9f1b3a1fmr1578414wrr.31.1700817656767; Fri, 24 Nov 2023 01:20:56 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id m23-20020a056000025700b00332ce0d7300sm3805755wrz.92.2023.11.24.01.20.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 24 Nov 2023 01:20:56 -0800 (PST) From: Neil Armstrong Date: Fri, 24 Nov 2023 10:20:44 +0100 Subject: [PATCH v4 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231124-topic-sm8650-upstream-dt-v4-7-e402e73cc5f0@linaro.org> References: <20231124-topic-sm8650-upstream-dt-v4-0-e402e73cc5f0@linaro.org> In-Reply-To: <20231124-topic-sm8650-upstream-dt-v4-0-e402e73cc5f0@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=6219; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=lQBCp1m4Jg+eo2PKFFIsdpDkhpzuG5vLXmMIqKfipxY=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlYGrwWfFhG8yF8ENycGFMUSBa3NrSdElEGH3H6R1y sldhmomJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZWBq8AAKCRB33NvayMhJ0X1+D/ 9Fzk4dh71NwGZEZhkhUHz3ZQ1azErl7pAjo7H1lvH1B/qEulRG2lTb6ETV9Se1lnjrgMqyWwndyNUG 8fOahhweOMhMm7MDE5Qpzy+4wH5Vk8jr9cKybpjjV/KyEgtaMtgSchtdrgvjPYurHTt4ge2balWNNc 72GcwrFHrRJ/AFoosGu99b/go0YtRgnrS/nukpx9+2yh2t4HBIdD1EEgweh/0rC/l5gBUxjRiHahhj fp1y8mNH7wvctX2bv8sWITiop1NVGelcR6nIFnLRRtSmQfuBXwrVWJIon6lGHRSr7RfcjjWeeLo/XD D8bb7FNPYFEnIY3XJ4Si4nZ3G882RL2+yGUw2tp0nuoY4D3hYSJRL6Ni/sTj4BYSS9FOenooCCR5MB 2oOXz0LZHPWQ5QFFDShpA/XL8fC2aLZUCAJ+AWdDUC97aVfRESFRaiYXGsOeMEWI4bdy4E3uD+uM7F sS+R1BwqT1T7FhRd5gDKZw34bFbrcdzIu22AwdCx25JhpqOfiZybPpxjF4bo+fAO6ltMI360henxuZ fuYk7FswRz6TDxv80fo4vZ/0IlxRt/D2K1HLlR609QRcjhapHCOgsqLTCiuuo0Q04fzuqMiijP3hVI 3erzTXxZaJ4fRaLtRZbNmxFgQuF4qzFP2axyrdJwHU8rxGccRP6Ff9c++qBg== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Now interconnect dependent devices are added in sm8650 DTSI, now enable more devices for the Qualcomm SM8650 MTP board: - PCIe - Display - DSPs - SDCard - UFS - USB role switch with PMIC Glink Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 235 +++++++++++++++++++++++++++++++- 1 file changed, 234 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 51092d20d610..656cdbc6f234 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -28,6 +28,44 @@ chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -77,6 +115,9 @@ vreg_l2b_3p0: ldo2 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; }; vreg_l5b_3p1: ldo5 { @@ -389,6 +430,106 @@ vreg_l3i_1p2: ldo3 { }; }; +&dispcc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; +}; + &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; @@ -398,6 +539,43 @@ &qupv3_id_1 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32000>; }; @@ -405,12 +583,58 @@ &sleep_clk { &tlmm { /* Reserved I/Os for NFC */ gpio-reserved-ranges = <32 8>; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart15 { status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + /* * DPAUX -> WCD9395 -> USB_SBU -> USB-C * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C @@ -422,7 +646,16 @@ &usb_1 { }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy {