@@ -145,6 +145,12 @@ properties:
and devices related to the Modem.
unevaluatedProperties: false
+ cooling:
+ $ref: /schemas/thermal/qcom,qmi-cooling.yaml#
+ description:
+ Cooling subnode which represents the cooling devices exposed by the Modem.
+ unevaluatedProperties: false
+
# Deprecated properties
mba:
type: object
@@ -386,6 +392,13 @@ examples:
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ cooling {
+ vdd {
+ label = "cpuv_restriction_cold";
+ #cooling-cells = <2>;
+ };
+ };
+
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
@@ -77,6 +77,12 @@ properties:
and devices related to the ADSP.
unevaluatedProperties: false
+ cooling:
+ $ref: /schemas/thermal/qcom,qmi-cooling.yaml#
+ description:
+ Cooling subnode which represents the cooling devices exposed by the Modem.
+ unevaluatedProperties: false
+
required:
- clocks
- clock-names
new file mode 100644
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 (c), Linaro Limited
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,qmi-cooling.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMI based thermal mitigation (TMD) cooling devices.
+
+maintainers:
+ - Caleb Connolly <caleb.connolly@linaro.org>
+
+description:
+ Qualcomm QMI based TMD cooling device(s) are used for various mitigations for
+ remote subsystem(s) including remote processor mitigation, rail voltage
+ restriction etc. Some devices such as "cpuv_restriction_cold" are for warming,
+ (e.g. by raising minimum voltage on core system rails).
+
+ Each subnode represents a control for a single instance of the TMD service running
+ on a remote subsystem.
+
+definitions:
+ tmd:
+ type: object
+ description: |
+ A single Thermal Mitigation Device exposed by a remote subsystem.
+ properties:
+ label:
+ maxItems: 1
+ "#cooling-cells":
+ $ref: /schemas/thermal/thermal-cooling-devices.yaml#/properties/#cooling-cells
+
+ required:
+ - label
+ - "#cooling-cells"
+
+ additionalProperties: false
+
+properties:
+ compatible:
+ enum:
+ - qcom,qmi-cooling-modem
+ - qcom,qmi-cooling-adsp
+ - qcom,qmi-cooling-cdsp
+ - qcom,qmi-cooling-slpi
+
+ vdd:
+ $ref: "#/definitions/tmd"
+ description:
+ Restrict primary rail minimum voltage to "nominal" setting.
+ properties:
+ label:
+ const: cpuv_restriction_cold
+
+required:
+ - compatible
+ - vdd
+
+# Modem has additional TMDs
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,qmi-cooling-modem
+ then:
+ properties:
+ pa:
+ $ref: "#/definitions/tmd"
+ description:
+ Power Amplifier TMD
+ properties:
+ label:
+ const: pa
+
+ proc:
+ $ref: "#/definitions/tmd"
+ description:
+ Modem processor temperature TMD
+ properties:
+ label:
+ const: modem
+
+ current:
+ $ref: "#/definitions/tmd"
+ description:
+ Modem peak current TMD
+ properties:
+ label:
+ const: modem_current
+
+ skin:
+ $ref: "#/definitions/tmd"
+ description:
+ Modem skin temperature TMD
+ properties:
+ label:
+ const: modem_skin
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ remoteproc-modem {
+ cooling {
+ compatible = "qcom,qmi-cooling-modem";
+
+ modem_pa: pa {
+ label = "pa";
+ #cooling-cells = <2>;
+ };
+
+ modem_proc: proc {
+ label = "modem";
+ #cooling-cells = <2>;
+ };
+
+ modem_current: current {
+ label = "modem_current";
+ #cooling-cells = <2>;
+ };
+
+ modem_skin: skin {
+ label = "modem_skin";
+ #cooling-cells = <2>;
+ };
+
+ modem_vdd: vdd {
+ label = "cpuv_restriction_cold";
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
+ remoteproc-adsp {
+ cooling {
+ compatible = "qcom,qmi-cooling-adsp";
+
+ adsp_vdd: vdd {
+ label = "cpuv_restriction_cold";
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
+ remoteproc-cdsp {
+ cooling {
+ compatible = "qcom,qmi-cooling-cdsp";
+
+ cdsp_vdd: vdd {
+ label = "cpuv_restriction_cold";
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
+ remoteproc-slpi {
+ cooling {
+ compatible = "qcom,qmi-cooling-slpi";
+
+ slpi_vdd: vdd {
+ label = "cpuv_restriction_cold";
+ #cooling-cells = <2>;
+ };
+ };
+ };
+...
The cooling subnode of a remoteproc represents a client of the Thermal Mitigation Device QMI service running on it. Each subnode of the cooling node represents a single control exposed by the service. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- .../bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 13 ++ .../bindings/remoteproc/qcom,pas-common.yaml | 6 + .../bindings/thermal/qcom,qmi-cooling.yaml | 168 +++++++++++++++++++++ 3 files changed, 187 insertions(+)