@@ -125,32 +125,26 @@ soc: soc@0 {
ssphy_1: phy@58000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00058000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00058000 0x1000>;
clocks = <&gcc GCC_USB1_AUX_CLK>,
- <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&xo>,
+ <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB1_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3phy_1_cc_pipe_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB1_PHY_BCR>,
- <&gcc GCC_USB3PHY_1_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
+ <&gcc GCC_USB3PHY_1_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb1_ssphy: phy@58200 {
- reg = <0x00058200 0x130>, /* Tx */
- <0x00058400 0x200>, /* Rx */
- <0x00058800 0x1f8>, /* PCS */
- <0x00058600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB1_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_1_cc_pipe_clk";
- };
+ status = "disabled";
};
qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@ qusb_phy_1: phy@59000 {
ssphy_0: phy@78000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00078000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00078000 0x1000>;
clocks = <&gcc GCC_USB0_AUX_CLK>,
- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&xo>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3phy_0_cc_pipe_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB0_PHY_BCR>,
- <&gcc GCC_USB3PHY_0_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb0_ssphy: phy@78200 {
- reg = <0x00078200 0x130>, /* Tx */
- <0x00078400 0x200>, /* Rx */
- <0x00078800 0x1f8>, /* PCS */
- <0x00078600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_0_cc_pipe_clk";
- };
+ status = "disabled";
};
qusb_phy_0: phy@79000 {
@@ -628,7 +616,7 @@ dwc_0: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_0>, <&usb0_ssphy>;
+ phys = <&qusb_phy_0>, <&ssphy_0>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +658,7 @@ dwc_1: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_1>, <&usb1_ssphy>;
+ phys = <&qusb_phy_1>, <&ssphy_1>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 76 +++++++++++---------------- 1 file changed, 32 insertions(+), 44 deletions(-)