diff mbox series

[v5,4/6] soc: qcom: Add LLCC support for multi channel DDR

Message ID 20230724084155.8682-5-quic_kbajaj@quicinc.com
State New
Headers show
Series soc: qcom: llcc: Add support for QDU1000/QRU1000 | expand

Commit Message

Komal Bajaj July 24, 2023, 8:41 a.m. UTC 
Add LLCC support for multi channel DDR configuration
based on a feature register.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 drivers/soc/qcom/llcc-qcom.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 321f8d2079f7..1d2b08dfecea 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -12,6 +12,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
@@ -997,6 +998,19 @@  static int qcom_llcc_cfg_program(struct platform_device *pdev,
 	return ret;
 }
 
+static int qcom_llcc_get_cfg_index(struct platform_device *pdev, u8 *cfg_index)
+{
+	int ret;
+
+	ret = nvmem_cell_read_u8(&pdev->dev, "multi-chan-ddr", cfg_index);
+	if (ret == -ENOENT || ret == -EOPNOTSUPP) {
+		*cfg_index = 0;
+		return 0;
+	}
+
+	return ret;
+}
+
 static int qcom_llcc_remove(struct platform_device *pdev)
 {
 	/* Set the global pointer to a error code to avoid referencing it */
@@ -1033,6 +1047,7 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 	const struct qcom_llcc_config *cfg;
 	const struct llcc_slice_config *llcc_cfg;
 	u32 sz;
+	u8 cfg_index;
 	u32 version;
 	struct regmap *regmap;
 
@@ -1050,7 +1065,16 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 	}
 
 	cfgs = of_device_get_match_data(&pdev->dev);
-	cfg = &cfgs->llcc_config[0];
+	ret = qcom_llcc_get_cfg_index(pdev, &cfg_index);
+	 if (ret)
+		goto err;
+
+	if (cfg_index >= cfgs->num_cfgs) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	cfg = &cfgs->llcc_config[cfg_index];
 
 	ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
 	if (ret)