| Message ID | 20230715091932.161507-8-davidwronek@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add initial support for SM7125 and Xiaomi SM7125 platform | expand |
On 15.07.2023 11:16, David Wronek wrote: > There are 6 Xiaomi smartphones with the SM7125 SoC: > > - POCO M2 Pro (gram) > - Redmi Note 9S (curtana) > - Redmi Note 9 Pro (Global, joyeuse) > - Redmi Note 9 Pro (India, curtana) > - Redmi Note 9 Pro Max (excalibur) > - Redmi Note 10 Lite (curtana) > > These devices share a common board design (a.k.a miatoll) with only a > few differences. Add support for the common board, as well as support > for the global Redmi Note 9 Pro. > > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- The copyright headers seem weird, but other than that: Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + > .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ > 3 files changed, 440 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 337abc4ceb17..7ef9e7d43904 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > new file mode 100644 > index 000000000000..2b3d1ed1bcae > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "sm7125-xiaomi-miatoll.dtsi" > + > +/ { > + model = "Xiaomi Redmi Note 9 Pro (Global)"; > + compatible = "xiaomi,joyeuse", "qcom,sm7125"; > + > + /* required for bootloader to select correct board */ > + qcom,board-id = <0x50022 1>; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > new file mode 100644 > index 000000000000..80073140e475 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi > @@ -0,0 +1,423 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/arm/qcom,ids.h> > +#include <dt-bindings/firmware/qcom,scm.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm7125.dtsi" > +#include "pm6150.dtsi" > +#include "pm6150l.dtsi" > + > +/delete-node/ &ipa_fw_mem; > +/delete-node/ &rmtfs_mem; > + > +/ { > + chassis-type = "handset"; > + > + qcom,msm-id = <QCOM_ID_SM7125 0>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer@9c000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; > + width = <1080>; > + height = <2400>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > + }; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + > + key-vol-down { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + reserved-memory { > + mpss_mem: memory@86000000 { > + reg = <0x0 0x86000000 0x0 0x8400000>; > + no-map; > + }; > + > + venus_mem: memory@8ee00000 { > + reg = <0x0 0x8ee00000 0x0 0x500000>; > + no-map; > + }; > + > + cdsp_mem: memory@8f300000 { > + reg = <0x0 0x8f300000 0x0 0x1e00000>; > + no-map; > + }; > + > + adsp_mem: memory@91100000 { > + reg = <0x0 0x91100000 0x0 0x2800000>; > + no-map; > + }; > + > + wlan_mem: memory@93900000 { > + reg = <0x0 0x93900000 0x0 0x200000>; > + no-map; > + }; > + > + ipa_fw_mem: memory@93b00000 { > + reg = <0x0 0x93b00000 0x0 0x10000>; > + no-map; > + }; > + > + gpu_mem: memory@93b15000 { > + reg = <0x0 0x93b15000 0x0 0x2000>; > + no-map; > + }; > + > + cont_splash_mem: memory@9c000000 { > + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; > + no-map; > + }; > + > + pstore_mem: ramoops@9d800000 { > + compatible = "ramoops"; > + reg = <0x0 0x9d800000 0x0 0x400000>; > + record-size = <0x80000>; > + pmsg-size = <0x200000>; > + console-size = <0x100000>; > + }; > + > + rmtfs_mem: memory@fa601000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0xfa601000 0x0 0x200000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; > + }; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm6150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vreg_s1a_1p1: smps1 { > + regulator-min-microvolt = <1128000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s4a_1p0: smps4 { > + regulator-min-microvolt = <824000>; > + regulator-max-microvolt = <1120000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-min-microvolt = <1744000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + vreg_l1a_1p2: ldo1 { > + regulator-min-microvolt = <1178000>; > + regulator-max-microvolt = <1256000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2a_1p0: ldo2 { > + regulator-min-microvolt = <944000>; > + regulator-max-microvolt = <1056000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3a_1p0: ldo3 { > + regulator-min-microvolt = <968000>; > + regulator-max-microvolt = <1064000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4a_0p88: ldo4 { > + regulator-min-microvolt = <824000>; > + regulator-max-microvolt = <928000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5a_2p7: ldo5 { > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6a_0p6: ldo6 { > + regulator-min-microvolt = <568000>; > + regulator-max-microvolt = <648000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9a_0p664: ldo9 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10a_1p8: ldo10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1832000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11a_1p8: ldo11 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1952000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a_1p8: ldo13 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-min-microvolt = <1728000>; > + regulator-max-microvolt = <1832000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16a_2p7: ldo16 { > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17a_3p1: ldo17 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18a_3p0: ldo18 { > + regulator-min-microvolt = <1696000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l19a_3p0: ldo19 { > + regulator-min-microvolt = <2696000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm6150l-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vreg_s8c_1p3: smps8 { > + regulator-min-microvolt = <1120000>; > + regulator-max-microvolt = <1408000>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-min-microvolt = <1616000>; > + regulator-max-microvolt = <1984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_1p3: ldo2 { > + regulator-min-microvolt = <1168000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_1p23: ldo3 { > + regulator-min-microvolt = <1144000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4c_1p8: ldo4 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5c_1p8: ldo5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_3p0: ldo6 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c_3p0: ldo7 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p9: ldo9 { > + regulator-min-microvolt = <2952000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p3: ldo11 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + }; > +}; > + > +&dispcc { > + /* HACK: disable until a panel driver is ready to retain simplefb */ > + status = "disabled"; > +}; > + > +&pm6150_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > +}; > + > +&pm6150_rtc { > + status = "okay"; > +}; > + > +&sdhc_2 { > + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&sdc2_on>; > + pinctrl-1 = <&sdc2_off>; > + vmmc-supply = <&vreg_l9c_2p9>; > + vqmmc-supply = <&vreg_l6c_3p0>; > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; > + > + sdc2_on: sdc2-on-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + sd-cd-pins { > + pins = "gpio69"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > + > + sdc2_off: sdc2-off-state { > + clk-pins { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <2>; > + }; > + > + cmd-pins { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + data-pins { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + sd-cd-pins { > + pins = "gpio69"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > +}; > + > +&usb_1 { > + qcom,select-utmi-as-pipe-clk; > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > + maximum-speed = "high-speed"; > + status = "okay"; > +}; > + > +&usb_1_hsphy { > + vdd-supply = <&vreg_l4a_0p88>; > + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; > + vdda-pll-supply = <&vreg_l11a_1p8>; > + status = "okay"; > +}; > + > +&usb_1_qmpphy { > + vdda-phy-supply = <&vreg_l4a_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p23>; > + status = "okay"; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 337abc4ceb17..7ef9e7d43904 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file mode 100644 index 000000000000..2b3d1ed1bcae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-xiaomi-miatoll.dtsi" + +/ { + model = "Xiaomi Redmi Note 9 Pro (Global)"; + compatible = "xiaomi,joyeuse", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x50022 1>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi new file mode 100644 index 000000000000..80073140e475 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7125.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM7125 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + key-vol-down { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8400000>; + no-map; + }; + + venus_mem: memory@8ee00000 { + reg = <0x0 0x8ee00000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@8f300000 { + reg = <0x0 0x8f300000 0x0 0x1e00000>; + no-map; + }; + + adsp_mem: memory@91100000 { + reg = <0x0 0x91100000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: memory@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: memory@93b00000 { + reg = <0x0 0x93b00000 0x0 0x10000>; + no-map; + }; + + gpu_mem: memory@93b15000 { + reg = <0x0 0x93b15000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + pstore_mem: ramoops@9d800000 { + compatible = "ramoops"; + reg = <0x0 0x9d800000 0x0 0x400000>; + record-size = <0x80000>; + pmsg-size = <0x200000>; + console-size = <0x100000>; + }; + + rmtfs_mem: memory@fa601000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xfa601000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a_0p88: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p664: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p1: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_3p0: ldo18 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p23: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_3p0: ldo6 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6150_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm6150_rtc { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_3p0>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p88>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; + vdda-pll-supply = <&vreg_l11a_1p8>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +};
There are 6 Xiaomi smartphones with the SM7125 SoC: - POCO M2 Pro (gram) - Redmi Note 9S (curtana) - Redmi Note 9 Pro (Global, joyeuse) - Redmi Note 9 Pro (India, curtana) - Redmi Note 9 Pro Max (excalibur) - Redmi Note 10 Lite (curtana) These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro. Signed-off-by: David Wronek <davidwronek@gmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ 3 files changed, 440 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi