From patchwork Thu Jul 13 10:59:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anusha Canchi X-Patchwork-Id: 702847 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B7987EB64DD for ; Thu, 13 Jul 2023 10:59:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233961AbjGMK7g (ORCPT ); Thu, 13 Jul 2023 06:59:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48882 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233934AbjGMK7e (ORCPT ); Thu, 13 Jul 2023 06:59:34 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 776D11999; Thu, 13 Jul 2023 03:59:32 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36D59fWN002643; Thu, 13 Jul 2023 10:59:28 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=05a3kJ72ST1UyOsJFanFdp32nnph1FLDzXXppM6GRvA=; b=MQCSeMmuyiXVLnhXlHjXFdiZfH7wi9GIB0fPFkzrEXJdFKtKMYPt9okZxQ3CVWeJcaxC jn4QZajDyPVIFsV6PsI1zdGrq064Njoorp1ioC8PRwtYZmV+1Ov0JE4OuQtev8Zrp5CC ojzxTx9BZEWeFSIx3A1Io4aqlHY/bbXgneaAYs9/b01AHTtd6Zv7ua6Ea7QYfS4LQcoA R6QxTa1Pmo5/ViBmEXqAvls6LNWP69Nz5GZHe1DFJQkxoRG+Gj6vBeYq0FAUBRln3Y+J ssNQ73QbKcnQtE9ZIxHTauy5Vz7iSOEPvt3rkvPEMO03OsPXL64wUAY/v2atPh4COuQM Jg== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3rt3f019h2-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 13 Jul 2023 10:59:28 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36DAxRL5021143 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 13 Jul 2023 10:59:27 GMT Received: from anusha-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 13 Jul 2023 03:59:23 -0700 From: Anusha Rao To: , , , , , , , , CC: , Subject: [PATCH V2 1/2] arm64: dts: qcom: ipq9574: Add common RDP dtsi file Date: Thu, 13 Jul 2023 16:29:08 +0530 Message-ID: <20230713105909.14209-2-quic_anusha@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230713105909.14209-1-quic_anusha@quicinc.com> References: <20230713105909.14209-1-quic_anusha@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: yhQ64mnwkXsluR1O0MOSSjYZK1BMubfl X-Proofpoint-ORIG-GUID: yhQ64mnwkXsluR1O0MOSSjYZK1BMubfl X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-13_04,2023-07-11_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 suspectscore=0 clxscore=1015 lowpriorityscore=0 malwarescore=0 bulkscore=0 phishscore=0 mlxscore=0 spamscore=0 adultscore=0 priorityscore=1501 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2307130096 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a dtsi file to include interfaces that are common across RDPs. Signed-off-by: Anusha Rao --- Changes in V2: - RDP418 and RDP433 supports shdc. Removed sdhc related nodes from common dtsi and added to corresponding rdp dts. - Moved USB and regulator related nodes to common.dtsi. - Updated rdp454 dts to use common.dtsi. .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 125 ++++++++++++++++++ arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 67 +--------- arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 95 +------------ arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts | 65 +-------- arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 65 +-------- arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts | 66 +-------- 6 files changed, 134 insertions(+), 349 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi new file mode 100644 index 000000000000..40a7aefd0540 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP board common device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulator_fixed_3p3: s3300 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_3p3"; + }; + + regulator_fixed_0p925: s0925 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_0p925"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + + mp5496_l2: l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_qmpphy { + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-supply = <®ulator_fixed_0p925>; + + status = "okay"; +}; + +&usb_0_qusbphy { + vdd-supply = <®ulator_fixed_0p925>; + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts index 2b093e02637b..ceb83c010c33 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -8,58 +8,12 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; }; &sdhc_1 { @@ -74,10 +28,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -96,8 +46,8 @@ data-pins { pins = "gpio0", "gpio1", "gpio2", - "gpio3", "gpio6", "gpio7", - "gpio8", "gpio9"; + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; function = "sdc_data"; drive-strength = <8>; bias-pull-up; @@ -110,15 +60,4 @@ bias-pull-down; }; }; - - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 877026ccc6e2..7685176f90ef 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -8,69 +8,11 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - regulator_fixed_3p3: s3300 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_3p3"; - }; - - regulator_fixed_0p925: s0925 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_0p925"; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - - mp5496_l2: l2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; }; &sdhc_1 { @@ -85,10 +27,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -107,8 +45,8 @@ data-pins { pins = "gpio0", "gpio1", "gpio2", - "gpio3", "gpio6", "gpio7", - "gpio8", "gpio9"; + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; function = "sdc_data"; drive-strength = <8>; bias-pull-up; @@ -122,30 +60,3 @@ }; }; }; - -&usb_0_dwc3 { - dr_mode = "host"; -}; - -&usb_0_qmpphy { - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-supply = <®ulator_fixed_0p925>; - - status = "okay"; -}; - -&usb_0_qusbphy { - vdd-supply = <®ulator_fixed_0p925>; - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; - - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <24000000>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts index c8fa54e1a62c..d36d1078763e 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts index f01de6628c3b..c30c9fbedf26 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts index 6efae3426cb8..0dc382f5d5ec 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -8,73 +8,9 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; };