diff mbox series

[v2,13/27] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files

Message ID 20230702134320.98831-14-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov July 2, 2023, 1:43 p.m. UTC
The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/pm8018.dtsi            | 57 +++++++++++++++++++
 .../boot/dts/qcom/qcom-mdm9615-wp8548.dtsi    |  1 +
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi      | 47 +--------------
 3 files changed, 60 insertions(+), 45 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom/pm8018.dtsi
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..c602544900b2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,57 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupt-parent = <&pm8018>;
+			interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+				     <51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			interrupt-parent = <&pm8018>;
+			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x11d>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..cc264861afe5 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@ 
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index e79582c6220b..c08c6252f3b7 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -241,56 +241,13 @@  gsbi5_serial: serial@16440000 {
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8018: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
+			pmic {
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8018>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8018_mpps: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8018_mpps 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pm8018>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pm8018_gpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8018_gpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
 			};
 		};