diff mbox series

[2/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees

Message ID 20230622000307.48281-1-linmengbo0689@protonmail.com
State Superseded
Headers show
Series arm64: dts: qcom: msm8916-samsung-fortuna: Add initial device trees | expand

Commit Message

Lin, Meng-Bo June 22, 2023, 12:03 a.m. UTC 
From: Walter Broemeling <wallebroem@gmail.com>

Samsung Galaxy Core Prime, Grand Prime and Ace 4 are phones based on
MSM8916. They are similar to the other Samsung devices based on MSM8916
with only a few minor differences.

This initial commit adds support for:
 - fortuna3g (SM-G530H)
 - fortunaltezt (SM-G530Y)
 - gprimeltecan (SM-G530W)
 - grandprimelte (SM-G530FZ)
 - heatqlte (SM-G357FZ)
 - rossa (SM-G360G)

The device trees contain initial support with:
 - GPIO keys
 - Regulator haptic
 - SDHCI (internal and external storage)
 - USB Device Mode
 - UART (on USB connector via the SM5502/SM5504 MUIC)
 - WCNSS (WiFi/BT)
 - Regulators

There are different variants of Grand Prime, with some differences
in accelerometer, NFC and panel.
Core Prime and Grand Prime are similar, with some differences in MUIC,
panel and touchscreen.
Ace 4 and Core Prime are similar, with some differences in panel and
touchscreen.

The common parts are shared in
msm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsi
to reduce duplication.

Unfortunately, SM-G357FZ and SM-G530Y were released with outdated 32-bit
only firmware and never received any update from Samsung. Since the 32-bit
TrustZone firmware is signed there seems to be no way currently to
actually boot this device tree on arm64 Linux at the moment.

However, it is possible to use this device tree by compiling an ARM32
kernel instead. The device tree can be easily built on ARM32 with
an #include and it works really well there. To avoid confusion for others
it is still better to add this device tree on arm64. Otherwise it's easy
to forget to update this one when making some changes that affect all
MSM8916 devices.

Maybe someone finds a way to boot ARM64 Linux on this device at some
point. In this case I expect that this device tree can be simply used
as-is.

Signed-off-by: Walter Broemeling <wallebroem@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Add fortuna-common.dtsi, buttons, vibrator, WiFi]
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Add fortuna3g]
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Add heatqlte]
Signed-off-by: Gareth Peoples <mail@gpeopl.es>
[Add grandprimelte and fortunaltezt]
[Use msm8916-samsung-rossa-common.dtsi and reword the commit]
[Use regulator-haptic instead of gpio-vibrator]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   6 +
 .../dts/qcom/msm8216-samsung-fortuna3g.dts    |  11 ++
 .../qcom/msm8916-samsung-fortuna-common.dtsi  | 157 ++++++++++++++++++
 .../dts/qcom/msm8916-samsung-fortunaltezt.dts |  23 +++
 .../dts/qcom/msm8916-samsung-gprimeltecan.dts |  22 +++
 .../qcom/msm8916-samsung-grandprimelte.dts    |  11 ++
 .../dts/qcom/msm8916-samsung-heatqlte.dts     |  23 +++
 .../qcom/msm8916-samsung-rossa-common.dtsi    |  17 ++
 .../boot/dts/qcom/msm8916-samsung-rossa.dts   |  11 ++
 9 files changed, 281 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-heatqlte.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..f18db5063eda 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -17,6 +17,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
@@ -29,11 +30,16 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-fortunaltezt.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gprimeltecan.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandprimelte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-heatqlte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-rossa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
new file mode 100644
index 000000000000..366914be7d53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
@@ -0,0 +1,11 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530H)";
+	compatible = "samsung,fortuna3g", "qcom,msm8916";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
new file mode 100644
index 000000000000..40c8edc795b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -0,0 +1,157 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85a00000 {
+			reg = <0x0 0x85a00000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	haptic {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	muic: extcon@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio72";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
new file mode 100644
index 000000000000..f7c4dcb34bb3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
@@ -0,0 +1,23 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on this device at the moment,
+ * even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-fortunaltezt.dts
+ */
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530Y)";
+	compatible = "samsung,fortunaltezt", "qcom,msm8916";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
new file mode 100644
index 000000000000..883f20554dbe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
@@ -0,0 +1,22 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530W)";
+	compatible = "samsung,gprimeltecan", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reserved-memory {
+		/* Firmware for gprimeltecan needs more space */
+		/delete-node/ tz-apps@85a00000;
+
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
new file mode 100644
index 000000000000..ea8a1e698dd4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
@@ -0,0 +1,11 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530FZ)";
+	compatible = "samsung,grandprimelte", "qcom,msm8916";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-heatqlte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-heatqlte.dts
new file mode 100644
index 000000000000..fbf065734cbb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-heatqlte.dts
@@ -0,0 +1,23 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-rossa-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on this device at the moment,
+ * even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-heatqlte.dts
+ */
+
+/ {
+	model = "Samsung Galaxy Ace 4 (SM-G357FZ)";
+	compatible = "samsung,heatqlte", "qcom,msm8916";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
new file mode 100644
index 000000000000..5b012dc92e0e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
@@ -0,0 +1,17 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+&blsp_i2c1 {
+	/* SM5504 MUIC instead of SM5502 */
+	/delete-node/ extcon@25;
+
+	muic: extcon@14 {
+		compatible = "siliconmitus,sm5504-muic";
+		reg = <0x14>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
new file mode 100644
index 000000000000..2c6f04ad2cfe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
@@ -0,0 +1,11 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-rossa-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Core Prime LTE";
+	compatible = "samsung,rossa", "qcom,msm8916";
+	chassis-type = "handset";
+};