diff mbox series

[v2,4/6] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs

Message ID 20230602062016.1883171-4-abel.vesa@linaro.org
State Superseded
Headers show
Series [v2,1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells | expand

Commit Message

Abel Vesa June 2, 2023, 6:20 a.m. UTC 
The USB HCs nodes are missing the interconnect paths, so add them.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

Changes since v1:
 * None.

 arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c5787489b05c..08ea6396d364 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3750,6 +3750,10 @@  usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
@@ -3810,6 +3814,10 @@  usb_2: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;