@@ -766,10 +766,10 @@ gcc: clock-controller@1800000 {
#power-domain-cells = <1>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
- <&dsi0_phy 1>,
- <&dsi0_phy 0>,
- <&dsi1_phy 1>,
- <&dsi1_phy 0>;
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&mdss_dsi1_phy 0>;
clock-names = "xo",
"sleep",
"dsi0pll",
@@ -851,20 +851,20 @@ ports {
port@0 {
reg = <0>;
mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
mdp5_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
+ remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
- dsi0: dsi@1a94000 {
+ mdss_dsi0: dsi@1a94000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x01a94000 0x400>;
reg-names = "dsi_ctrl";
@@ -874,8 +874,8 @@ dsi0: dsi@1a94000 {
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi0_phy 0>,
- <&dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
@@ -890,7 +890,7 @@ dsi0: dsi@1a94000 {
"pixel",
"core";
- phys = <&dsi0_phy>;
+ phys = <&mdss_dsi0_phy>;
#address-cells = <1>;
#size-cells = <0>;
@@ -903,20 +903,20 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
+ mdss_dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi0_phy: phy@1a94400 {
+ mdss_dsi0_phy: phy@1a94400 {
compatible = "qcom,dsi-phy-14nm-8953";
reg = <0x01a94400 0x100>,
<0x01a94500 0x300>,
@@ -934,7 +934,7 @@ dsi0_phy: phy@1a94400 {
status = "disabled";
};
- dsi1: dsi@1a96000 {
+ mdss_dsi1: dsi@1a96000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x01a96000 0x400>;
reg-names = "dsi_ctrl";
@@ -944,8 +944,8 @@ dsi1: dsi@1a96000 {
assigned-clocks = <&gcc BYTE1_CLK_SRC>,
<&gcc PCLK1_CLK_SRC>;
- assigned-clock-parents = <&dsi1_phy 0>,
- <&dsi1_phy 1>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
@@ -960,7 +960,7 @@ dsi1: dsi@1a96000 {
"pixel",
"core";
- phys = <&dsi1_phy>;
+ phys = <&mdss_dsi1_phy>;
status = "disabled";
@@ -970,20 +970,20 @@ ports {
port@0 {
reg = <0>;
- dsi1_in: endpoint {
+ mdss_dsi1_in: endpoint {
remote-endpoint = <&mdp5_intf2_out>;
};
};
port@1 {
reg = <1>;
- dsi1_out: endpoint {
+ mdss_dsi1_out: endpoint {
};
};
};
};
- dsi1_phy: phy@1a96400 {
+ mdss_dsi1_phy: phy@1a96400 {
compatible = "qcom,dsi-phy-14nm-8953";
reg = <0x01a96400 0x100>,
<0x01a96500 0x300>,
Currently in board files MDSS and DSI nodes stay apart, because labels for DSI nodes do not have the mdss_ prefix. It was found that grouping all display-related notes is more useful. To keep all display-related nodes close in the board files, change DSI node labels from dsi_* to mdss_dsi_*. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8953.dtsi | 40 +++++++++++++-------------- 1 file changed, 20 insertions(+), 20 deletions(-)