diff mbox series

[v1,4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes

Message ID 20230526133122.16443-5-quic_shazhuss@quicinc.com
State Accepted
Commit 445a523d462432dd9001c899e2c3ced60d23994b
Headers show
Series dts: qcom: sa8775p: add missing qup id's, i2c, | expand

Commit Message

Shazad Hussain May 26, 2023, 1:31 p.m. UTC 
Add remaining uart5 and uart9 nodes for UART bus present on sa8775p
SoC.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 30 +++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 5c7b838d239a..b130136acffe 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1083,6 +1083,21 @@ 
 				power-domains = <&rpmhpd SA8775P_CX>;
 				status = "disabled";
 			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
 		};
 
 		qupv3_id_1: geniqup@ac0000 {
@@ -1223,6 +1238,21 @@ 
 				status = "disabled";
 			};
 
+			uart9: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
 			i2c10: i2c@a8c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0xa8c000 0x0 0x4000>;