diff mbox series

[v3,06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings

Message ID 20230523140622.265692-7-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series phy: qcom-qmp-ufs: convert to newer style of bindings | expand

Commit Message

Dmitry Baryshkov May 23, 2023, 2:06 p.m. UTC 
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 631ca327e064..289b96d31414 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -784,7 +784,7 @@  ufs_mem_hc: ufs@4804000 {
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -825,24 +825,17 @@  ufs_mem_hc: ufs@4804000 {
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {