@@ -38,6 +38,8 @@
#include <linux/mutex.h>
#include <asm/unaligned.h>
+#include <drm/drm_panel.h>
+
#include "../hid-ids.h"
#include "i2c-hid.h"
@@ -107,6 +109,8 @@ struct i2c_hid {
struct mutex reset_lock;
struct i2chid_ops *ops;
+ struct drm_panel_follower panel_follower;
+ bool is_panel_follower;
};
static const struct i2c_hid_quirks {
@@ -1058,6 +1062,34 @@ int i2c_hid_core_initial_power_up(struct i2c_hid *ihid)
return ret;
}
+int i2c_hid_core_panel_prepared(struct drm_panel_follower *follower)
+{
+ struct i2c_hid *ihid = container_of(follower, struct i2c_hid, panel_follower);
+ struct hid_device *hid = ihid->hid;
+
+ /*
+ * hid->version is set on the first power up. If it's still zero then
+ * this is the first power on so we should perform initial power up
+ * steps.
+ */
+ if (!hid->version)
+ return i2c_hid_core_initial_power_up(ihid);
+
+ return i2c_hid_core_resume(ihid);
+}
+
+int i2c_hid_core_panel_unpreparing(struct drm_panel_follower *follower)
+{
+ struct i2c_hid *ihid = container_of(follower, struct i2c_hid, panel_follower);
+
+ return i2c_hid_core_suspend(ihid);
+}
+
+static const struct drm_panel_follower_funcs i2c_hid_core_panel_follower_funcs = {
+ .panel_prepared = i2c_hid_core_panel_prepared,
+ .panel_unpreparing = i2c_hid_core_panel_unpreparing,
+};
+
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
u16 hid_descriptor_address, u32 quirks)
{
@@ -1119,6 +1151,41 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
hid->bus = BUS_I2C;
hid->initial_quirks = quirks;
+ /*
+ * See if we're following a panel. If drm_panel_add_follower()
+ * returns no error then we are.
+ */
+ ihid->panel_follower.funcs = &i2c_hid_core_panel_follower_funcs;
+ ret = drm_panel_add_follower(&client->dev, &ihid->panel_follower);
+ if (!ret) {
+ /* We're a follower. That means we'll power things up later. */
+ ihid->is_panel_follower = true;
+
+ /*
+ * If we're not in control of our own power up/power down then
+ * we can't do the logic to manage wakeups. Give a warning if
+ * a user thought that was possible then force the capability
+ * off.
+ */
+ if (device_can_wakeup(&client->dev)) {
+ dev_warn(&client->dev, "Can't wakeup if following panel\n");
+ device_set_wakeup_capable(&client->dev, false);
+ }
+
+ return 0;
+ }
+
+ /*
+ * -ENODEV means that we're not following a panel, so any other error
+ * is a real problem (like -EPROBE_DEFER, -ENOMEM, ...).
+ */
+ if (ret != -ENODEV)
+ goto err_mem_free;
+
+ /*
+ * We're not following a panel. That's fine and means that we
+ * can power up right away.
+ */
ret = i2c_hid_core_initial_power_up(ihid);
if (ret)
goto err_mem_free;
@@ -1143,7 +1210,14 @@ void i2c_hid_core_remove(struct i2c_client *client)
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
- i2c_hid_core_power_down(ihid);
+ /*
+ * If we're a follower, the act of unfollowing will cause us to be
+ * powered down. Otherwise we need to manually do it.
+ */
+ if (ihid->is_panel_follower)
+ drm_panel_remove_follower(&ihid->panel_follower);
+ else
+ i2c_hid_core_power_down(ihid);
hid = ihid->hid;
hid_destroy_device(hid);
@@ -1171,6 +1245,9 @@ static int i2c_hid_core_pm_suspend(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
+ if (ihid->is_panel_follower)
+ return 0;
+
return i2c_hid_core_suspend(ihid);
}
@@ -1179,6 +1256,9 @@ static int i2c_hid_core_pm_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
+ if (ihid->is_panel_follower)
+ return 0;
+
return i2c_hid_core_resume(ihid);
}
As talked about in the patch ("drm/panel: Add a way for other devices to follow panel state"), we really want to keep the power states of a touchscreen and the panel it's attached to in sync with each other. In that spirit, add support to i2c-hid to be a panel follower. This will let the i2c-hid driver get informed when the panel is powered on and off. From there we can match the i2c-hid device's power state to that of the panel. NOTE: this patch specifically _doesn't_ use pm_runtime to keep track of / manage the power state of the i2c-hid device, even though my first instinct said that would be the way to go. Specific problems with using pm_runtime(): * The initial power up couldn't happen in a runtime resume function since it create sub-devices and, apparently, that's not good to do in your resume function. * Managing our power state with pm_runtime meant fighting to make the right thing happen at system suspend to prevent the system from trying to resume us only to suspend us again. While this might be able to be solved, it added complexity. Overall the code without pm_runtime() ended up being smaller and easier to understand. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- drivers/hid/i2c-hid/i2c-hid-core.c | 82 +++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 1 deletion(-)