diff mbox series

[10/10] ARM: dts: qcom-mdm9615: specify gcc clocks

Message ID 20230501203401.41393-11-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series clk: qcom: convert mdm9615 to parent_hws/_data | expand

Commit Message

Dmitry Baryshkov May 1, 2023, 8:34 p.m. UTC
Fully specify the clocks used by the GCC on the mdm9615 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Neil Armstrong May 2, 2023, 8:37 a.m. UTC | #1
On 01/05/2023 22:34, Dmitry Baryshkov wrote:
> Fully specify the clocks used by the GCC on the mdm9615 platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   arch/arm/boot/dts/qcom-mdm9615.dtsi | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> index 556abe90cf5b..e81e5e3196d9 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
> +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> @@ -10,6 +10,7 @@
>   
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/clock/qcom,gcc-mdm9615.h>
> +#include <dt-bindings/clock/qcom,lcc-msm8960.h>
>   #include <dt-bindings/reset/qcom,gcc-mdm9615.h>
>   #include <dt-bindings/mfd/qcom-rpm.h>
>   #include <dt-bindings/soc/qcom,gsbi.h>
> @@ -106,6 +107,10 @@ gcc: clock-controller@900000 {
>   			#power-domain-cells = <1>;
>   			#reset-cells = <1>;
>   			reg = <0x900000 0x4000>;
> +			clocks = <&cxo_board>,
> +				 <&lcc PLL4>;
> +			clock-names = "cxo",
> +				      "pll4";
>   		};
>   
>   		lcc: clock-controller@28000000 {

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 556abe90cf5b..e81e5e3196d9 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -10,6 +10,7 @@ 
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-mdm9615.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -106,6 +107,10 @@  gcc: clock-controller@900000 {
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo",
+				      "pll4";
 		};
 
 		lcc: clock-controller@28000000 {