From patchwork Mon May 1 14:34:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 678150 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 425EAC7EE26 for ; Mon, 1 May 2023 14:36:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232355AbjEAOgA (ORCPT ); Mon, 1 May 2023 10:36:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46994 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232557AbjEAOf4 (ORCPT ); Mon, 1 May 2023 10:35:56 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B9EFF10D8; Mon, 1 May 2023 07:35:47 -0700 (PDT) Received: from pps.filterd (m0279872.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 341Depu7000803; Mon, 1 May 2023 14:35:22 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=XFJuBPrmx95abh1S7SCQciIy/cR4x26RJM+o00++sI8=; b=gOISlIkqLEYG4xscsSBlVLlQYHOjBUfhYm4AO485DgWWZQdcwyKKlWsBC41l39OKhFyI 4WzDQFSzApJUxgxHZNjhBkuElW5RN9T4yCZVyDVH1BF1NIU38uTl71mg5+XRy8xWgTlO Fbd6Aenivom88HZ3TQWvlZSuz2fR5JlsBKa+ROvehkbhGYg1PLs/6+bjCQuIRqJZNFDp 3V9iBVC+lw1UOXWUz6RlwPU/nSbI2eWTppzolaeplJIHgrkOxgHoc9YXTkhhUIpRyEUz KHRxpgBj9kphc7kkBFSC11LvMjSLsOaau9ZBScc8u2oqgMQkjM5pgLoT77wYEUFmU62j ug== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3q8umg3p02-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 01 May 2023 14:35:21 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 341EZKxx012022 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 1 May 2023 14:35:20 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Mon, 1 May 2023 07:35:14 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v7 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Date: Mon, 1 May 2023 20:04:39 +0530 Message-ID: <20230501143445.3851-4-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230501143445.3851-1-quic_kriskura@quicinc.com> References: <20230501143445.3851-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 17G3dX379_eFQqfIaZcj1wguVNQx082S X-Proofpoint-ORIG-GUID: 17G3dX379_eFQqfIaZcj1wguVNQx082S X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-01_07,2023-04-27_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 spamscore=0 impostorscore=0 mlxlogscore=999 mlxscore=0 adultscore=0 suspectscore=0 clxscore=1015 priorityscore=1501 malwarescore=0 bulkscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305010115 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports. The intention is as follows: Wherever we need to perform phy operations like: LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS() { phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); } If number of usb2 ports is 3, loop can go from index 0-2 for usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure, if the first 2 ports are SS capable or some other ports like (2 and 3) are SS capable. So instead, num_usb2_ports is used to loop around all phy's (both hs and ss) for performing phy operations. If any usb3_generic_phy turns out to be NULL, phy operation just bails out. num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up phy's as we need to know how many SS capable ports are there for this. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 68 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 58 +++++++++++++++++++++++++++++++++++ 2 files changed, 126 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0beaab932e7d..b8ac7bcee391 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1767,6 +1767,59 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; } +static int dwc3_read_port_info(struct dwc3 *dwc) +{ + void __iomem *regs; + u32 offset; + u32 temp; + u8 major_revision; + int ret = 0; + + /* + * Remap xHCI address space to access XHCI ext cap regs, + * since it is needed to get port info. + */ + regs = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + offset = dwc3_xhci_find_next_ext_cap(regs, 0, + XHCI_EXT_CAPS_PROTOCOL); + while (offset) { + temp = readl(regs + offset); + major_revision = XHCI_EXT_PORT_MAJOR(temp); + + temp = readl(regs + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(temp); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(temp); + } else { + dev_err(dwc->dev, "port revision seems wrong\n"); + ret = -EINVAL; + goto unmap_reg; + } + + offset = dwc3_xhci_find_next_ext_cap(regs, offset, + XHCI_EXT_CAPS_PROTOCOL); + } + + temp = readl(regs + DWC3_XHCI_HCSPARAMS1); + if (HCS_MAX_PORTS(temp) != (dwc->num_usb3_ports + dwc->num_usb2_ports)) { + dev_err(dwc->dev, "inconsistency in port info\n"); + ret = -EINVAL; + goto unmap_reg; + } + + dev_dbg(dwc->dev, + "hs-ports: %d ss-ports: %d\n", dwc->num_usb2_ports, dwc->num_usb3_ports); + +unmap_reg: + iounmap(regs); + return ret; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1774,6 +1827,7 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem *regs; struct dwc3 *dwc; int ret; + unsigned int hw_mode; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) @@ -1843,6 +1897,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; } + /* + * Currently DWC3 controllers that are host-only capable + * support Multiport + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_read_port_info(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index d56457c02996..21312703e053 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -35,6 +35,17 @@ #define DWC3_MSG_MAX 500 +/* Define XHCI Extcap register offsets for getting multiport info */ +#define XHCI_HCC_PARAMS_OFFSET 0x10 +#define DWC3_XHCI_HCSPARAMS1 0x04 +#define XHCI_EXT_CAPS_PROTOCOL 2 +#define XHCI_HCC_EXT_CAPS(x) (((x) >> 16) & 0xffff) +#define XHCI_EXT_CAPS_ID(x) (((x) >> 0) & 0xff) +#define XHCI_EXT_CAPS_NEXT(x) (((x) >> 8) & 0xff) +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) +#define HCS_MAX_PORTS(x) (((x) >> 24) & 0x7f) + /* Global constants */ #define DWC3_PULL_UP_TIMEOUT 500 /* ms */ #define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */ @@ -1025,6 +1036,8 @@ struct dwc3_scratchpad_array { * @usb_psy: pointer to power supply interface. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY + * @num_usb2_ports: number of usb2 ports. + * @num_usb3_ports: number of usb3 ports. * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY * @phys_ready: flag to indicate that PHYs are ready @@ -1162,6 +1175,9 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; + u32 num_usb2_ports; + u32 num_usb3_ports; + struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; @@ -1650,4 +1666,46 @@ static inline void dwc3_ulpi_exit(struct dwc3 *dwc) { } #endif +/** + * dwc3_xhci_find_next_ext_cap - Find the offset of the extended capabilities + * with capability ID id. + * + * @base PCI MMIO registers base address. + * @start address at which to start looking, (0 or HCC_PARAMS to start at + * beginning of list) + * @id Extended capability ID to search for, or 0 for the next + * capability + * + * Returns the offset of the next matching extended capability structure. + * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL, + * and this provides a way to find them all. + */ +static inline int dwc3_xhci_find_next_ext_cap(void __iomem *base, u32 start, int id) +{ + u32 val; + u32 next; + u32 offset; + + offset = start; + if (!start || start == XHCI_HCC_PARAMS_OFFSET) { + val = readl(base + XHCI_HCC_PARAMS_OFFSET); + if (val == ~0) + return 0; + offset = XHCI_HCC_EXT_CAPS(val) << 2; + if (!offset) + return 0; + } + do { + val = readl(base + offset); + if (val == ~0) + return 0; + if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id)) + return offset; + + next = XHCI_EXT_CAPS_NEXT(val); + offset += next << 2; + } while (next); + + return 0; +} #endif /* __DRIVERS_USB_DWC3_CORE_H */