@@ -66,6 +66,15 @@ pmk8350_rtc: rtc@6100 {
status = "disabled";
};
+ pmk8350_sdam_6: nvram@8500 {
+ compatible = "qcom,spmi-sdam";
+ reg = <0x8500>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8500 0x100>;
+ status = "disabled";
+ };
+
pmk8350_gpios: gpio@b000 {
compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
@@ -559,18 +559,18 @@ &pmc8280c_lpg {
status = "okay";
};
-&pmk8280_pon_pwrkey {
+&pmk8350_pon_pwrkey {
status = "okay";
};
-&pmk8280_rtc {
+&pmk8350_rtc {
nvmem-cells = <&rtc_offset>;
nvmem-cell-names = "offset";
status = "okay";
};
-&pmk8280_sdam_6 {
+&pmk8350_sdam_6 {
status = "okay";
rtc_offset: rtc-offset@bc {
@@ -275,7 +275,7 @@ thermal-zones {
skin-temp-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
- thermal-sensors = <&pmk8280_adc_tm 5>;
+ thermal-sensors = <&pmk8350_adc_tm 5>;
trips {
skin_temp_alert0: trip-point0 {
@@ -729,12 +729,12 @@ &pmc8280c_lpg {
status = "okay";
};
-&pmk8280_adc_tm {
+&pmk8350_adc_tm {
status = "okay";
sys-therm@0 {
reg = <0>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -742,7 +742,7 @@ sys-therm@0 {
sys-therm@1 {
reg = <1>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -750,7 +750,7 @@ sys-therm@1 {
sys-therm@2 {
reg = <2>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -758,7 +758,7 @@ sys-therm@2 {
sys-therm@3 {
reg = <3>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -766,7 +766,7 @@ sys-therm@3 {
sys-therm@4 {
reg = <4>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -774,7 +774,7 @@ sys-therm@4 {
sys-therm@5 {
reg = <5>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -782,7 +782,7 @@ sys-therm@5 {
sys-therm@6 {
reg = <6>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
@@ -790,29 +790,29 @@ sys-therm@6 {
sys-therm@7 {
reg = <7>;
- io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
qcom,hw-settle-time-us = <200>;
qcom,avg-samples = <2>;
qcom,ratiometric;
};
};
-&pmk8280_pon_pwrkey {
+&pmk8350_pon_pwrkey {
status = "okay";
};
-&pmk8280_pon_resin {
+&pmk8350_pon_resin {
status = "okay";
};
-&pmk8280_rtc {
+&pmk8350_rtc {
nvmem-cells = <&rtc_offset>;
nvmem-cell-names = "offset";
status = "okay";
};
-&pmk8280_sdam_6 {
+&pmk8350_sdam_6 {
status = "okay";
rtc_offset: rtc-offset@bc {
@@ -820,7 +820,7 @@ rtc_offset: rtc-offset@bc {
};
};
-&pmk8280_vadc {
+&pmk8350_vadc {
status = "okay";
pmic-die-temp@3 {
@@ -51,70 +51,11 @@ trip1 {
};
};
-&spmi_bus {
- pmk8280: pmic@0 {
- compatible = "qcom,pmk8350", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmk8280_pon: pon@1300 {
- compatible = "qcom,pm8998-pon";
- reg = <0x1300>;
-
- pmk8280_pon_pwrkey: pwrkey {
- compatible = "qcom,pmk8350-pwrkey";
- interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
- linux,code = <KEY_POWER>;
- status = "disabled";
- };
-
- pmk8280_pon_resin: resin {
- compatible = "qcom,pmk8350-resin";
- interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
- status = "disabled";
- };
- };
-
- pmk8280_vadc: adc@3100 {
- compatible = "qcom,spmi-adc7";
- reg = <0x3100>;
- interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
- status = "disabled";
- };
-
- pmk8280_adc_tm: adc-tm@3400 {
- compatible = "qcom,spmi-adc-tm5-gen2";
- reg = <0x3400>;
- interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #thermal-sensor-cells = <1>;
- status = "disabled";
- };
-
- pmk8280_rtc: rtc@6100 {
- compatible = "qcom,pmk8350-rtc";
- reg = <0x6100>, <0x6200>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
- wakeup-source;
- status = "disabled";
- };
-
- pmk8280_sdam_6: nvram@8500 {
- compatible = "qcom,spmi-sdam";
- reg = <0x8500>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x8500 0x100>;
- status = "disabled";
- };
- };
+#define PMK8350_SID 0
+#include "pmk8350.dtsi"
+#undef PMK8350_SID
+&spmi_bus {
pmc8280_1: pmic@1 {
compatible = "qcom,pm8350", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
Employ existing PMK8350_SID and switch sc8280xp-pmics to use pmk8350.dtsi to reduce duplication and possible discrepancies. For example, this changes sc8280xp platforms to use qcom,pmk8350-pon for the pon device compatibility rather than the incorrect qcom,pm8998-pon. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 9 +++ arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 6 +- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 ++++----- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 67 ++----------------- 4 files changed, 31 insertions(+), 81 deletions(-)