diff mbox series

[07/11] arm64: dts: qcom: sc7180-qcard: use just "port" in panel

Message ID 20230326155753.92007-7-krzysztof.kozlowski@linaro.org
State Accepted
Commit ff5508b93b9c5dd723ac68c315be1cf727845063
Headers show
Series [01/11] arm64: dts: qcom: sdm845-cheza: use just "port" in Innolux panel | expand

Commit Message

Krzysztof Kozlowski March 26, 2023, 3:57 p.m. UTC 
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

Comments

Dmitry Baryshkov March 27, 2023, 10:21 a.m. UTC | #1 
On 26/03/2023 18:57, Krzysztof Kozlowski wrote:
> The panel bindings expect to have only one port, thus they do not allow
> to use "ports" node:
> 
>    sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 11 +++--------
>   1 file changed, 3 insertions(+), 8 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 95d9e4a19d76..9137db066d9e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -354,14 +354,9 @@  edp_panel: panel {
 
 			backlight = <&pm8350c_pwm_backlight>;
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					edp_panel_in: endpoint {
-						remote-endpoint = <&mdss_edp_out>;
-					};
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
 				};
 			};
 		};