| Message ID | 20230326005733.2166354-9-dmitry.baryshkov@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | phy: qcom-qmp-combo: convert to newer style of bindings | expand |
On 26/03/2023 01:57, Dmitry Baryshkov wrote: > Change the USB QMP PHY to use newer style of QMP PHY bindings (single > resource region, no per-PHY subnodes). > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 48 ++++++++-------------------- > 1 file changed, 14 insertions(+), 34 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index a618218f7b68..4df9fef5c7b0 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -6,6 +6,7 @@ > > #include <dt-bindings/dma/qcom-gpi.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/phy/phy-qcom-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/clock/qcom,rpmh.h> > @@ -3391,47 +3392,26 @@ usb_2_hsphy: phy@88e3000 { > resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; > }; > > - usb_1_qmpphy: phy@88e9000 { > + usb_1_qmpphy: phy@88e8000 { > compatible = "qcom,sm8150-qmp-usb3-dp-phy"; > - reg = <0 0x088e9000 0 0x18c>, > - <0 0x088e8000 0 0x38>, > - <0 0x088ea000 0 0x40>; > - status = "disabled"; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > + reg = <0 0x088e8000 0 0x3000>; > + > clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, > - <&rpmhcc RPMH_CXO_CLK>, > <&gcc GCC_USB3_PRIM_CLKREF_CLK>, > - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; > - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > + clock-names = "aux", > + "ref", > + "com_aux", > + "usb3_pipe"; > resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, > <&gcc GCC_USB3_PHY_PRIM_BCR>; > reset-names = "phy", "common"; > > - usb_1_ssphy: phy@88e9200 { > - reg = <0 0x088e9200 0 0x200>, > - <0 0x088e9400 0 0x200>, > - <0 0x088e9c00 0 0x218>, > - <0 0x088e9600 0 0x200>, > - <0 0x088e9800 0 0x200>, > - <0 0x088e9a00 0 0x100>; > - #clock-cells = <0>; > - #phy-cells = <0>; > - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > - clock-names = "pipe0"; > - clock-output-names = "usb3_phy_pipe_clk_src"; > - }; > + #clock-cells = <1>; > + #phy-cells = <1>; > > - usb_1_dpphy: phy@88ea200 { > - reg = <0 0x088ea200 0 0x200>, > - <0 0x088ea400 0 0x200>, > - <0 0x088eaa00 0 0x200>, > - <0 0x088ea600 0 0x200>, > - <0 0x088ea800 0 0x200>; > - #clock-cells = <1>; > - #phy-cells = <0>; > - }; > + status = "disabled"; > }; > > usb_2_qmpphy: phy@88eb000 { > @@ -3568,7 +3548,7 @@ usb_1_dwc3: usb@a600000 { > iommus = <&apps_smmu 0x140 0>; > snps,dis_u2_susphy_quirk; > snps,dis_enblslpm_quirk; > - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; > + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; > phy-names = "usb2-phy", "usb3-phy"; > }; > }; Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index a618218f7b68..4df9fef5c7b0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -3391,47 +3392,26 @@ usb_2_hsphy: phy@88e3000 { resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8150-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088e8000 0 0x3000>; + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; - usb_1_dpphy: phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + status = "disabled"; }; usb_2_qmpphy: phy@88eb000 { @@ -3568,7 +3548,7 @@ usb_1_dwc3: usb@a600000 { iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; };
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 48 ++++++++-------------------- 1 file changed, 14 insertions(+), 34 deletions(-)