| Message ID | 20230326005733.2166354-6-dmitry.baryshkov@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | phy: qcom-qmp-combo: convert to newer style of bindings | expand |
On 26/03/2023 01:57, Dmitry Baryshkov wrote: > Change the USB QMP PHY to use newer style of QMP PHY bindings (single > resource region, no per-PHY subnodes). > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------ > 1 file changed, 19 insertions(+), 38 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 3c799b564b64..98004b02b762 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -14,6 +14,7 @@ > #include <dt-bindings/interconnect/qcom,osm-l3.h> > #include <dt-bindings/interconnect/qcom,sc7180.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/phy/phy-qcom-qmp.h> > #include <dt-bindings/phy/phy-qcom-qusb2.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/reset/qcom,sdm845-aoss.h> > @@ -2713,49 +2714,28 @@ usb_1_hsphy: phy@88e3000 { > nvmem-cells = <&qusb2p_hstx_trim>; > }; > > - usb_1_qmpphy: phy-wrapper@88e9000 { > + usb_1_qmpphy: phy@88e8000 { > compatible = "qcom,sc7180-qmp-usb3-dp-phy"; > - reg = <0 0x088e9000 0 0x18c>, > - <0 0x088e8000 0 0x3c>, > - <0 0x088ea000 0 0x18c>; > + reg = <0 0x088e8000 0 0x3000>; > status = "disabled"; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > > clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, > - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, > <&gcc GCC_USB3_PRIM_CLKREF_CLK>, > - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; > - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, > + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; > + clock-names = "aux", > + "ref", > + "com_aux", > + "usb3_pipe", > + "cfg_ahb"; > > resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, > <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; > reset-names = "phy", "common"; > > - usb_1_ssphy: usb3-phy@88e9200 { > - reg = <0 0x088e9200 0 0x128>, > - <0 0x088e9400 0 0x200>, > - <0 0x088e9c00 0 0x218>, > - <0 0x088e9600 0 0x128>, > - <0 0x088e9800 0 0x200>, > - <0 0x088e9a00 0 0x18>; > - #clock-cells = <0>; > - #phy-cells = <0>; > - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; > - clock-names = "pipe0"; > - clock-output-names = "usb3_phy_pipe_clk_src"; > - }; > - > - dp_phy: dp-phy@88ea200 { > - reg = <0 0x088ea200 0 0x200>, > - <0 0x088ea400 0 0x200>, > - <0 0x088eaa00 0 0x200>, > - <0 0x088ea600 0 0x200>, > - <0 0x088ea800 0 0x200>; > - #clock-cells = <1>; > - #phy-cells = <0>; > - }; > + #clock-cells = <1>; > + #phy-cells = <1>; > }; > > dc_noc: interconnect@9160000 { > @@ -2835,7 +2815,7 @@ usb_1_dwc3: usb@a600000 { > iommus = <&apps_smmu 0x540 0>; > snps,dis_u2_susphy_quirk; > snps,dis_enblslpm_quirk; > - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; > + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; > phy-names = "usb2-phy", "usb3-phy"; > maximum-speed = "super-speed"; > }; > @@ -3143,8 +3123,9 @@ mdss_dp: displayport-controller@ae90000 { > "ctrl_link_iface", "stream_pixel"; > assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, > <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; > - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; > - phys = <&dp_phy>; > + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, > + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; > + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; > phy-names = "dp"; > > operating-points-v2 = <&dp_opp_table>; > @@ -3201,8 +3182,8 @@ dispcc: clock-controller@af00000 { > <&gcc GCC_DISP_GPLL0_CLK_SRC>, > <&dsi_phy 0>, > <&dsi_phy 1>, > - <&dp_phy 0>, > - <&dp_phy 1>; > + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, > + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; > clock-names = "bi_tcxo", > "gcc_disp_gpll0_clk_src", > "dsi0_phy_pll_out_byteclk", Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 3c799b564b64..98004b02b762 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> @@ -2713,49 +2714,28 @@ usb_1_hsphy: phy@88e3000 { nvmem-cells = <&qusb2p_hstx_trim>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x3c>, - <0 0x088ea000 0 0x18c>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x18>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; dc_noc: interconnect@9160000 { @@ -2835,7 +2815,7 @@ usb_1_dwc3: usb@a600000 { iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; }; @@ -3143,8 +3123,9 @@ mdss_dp: displayport-controller@ae90000 { "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -3201,8 +3182,8 @@ dispcc: clock-controller@af00000 { <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, <&dsi_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "dsi0_phy_pll_out_byteclk",
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------ 1 file changed, 19 insertions(+), 38 deletions(-)