[1/2] dt-bindings: pinctrl: qcom: Add SM7150 pinctrl binding

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
new file mode 100644
index 000000000000..a57d44efe5bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -0,0 +1,162 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm7150-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM7150 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: north
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 119
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm7150-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm7150-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm7150-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_tsens2, atest_usb1, atest_usb2, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2,
+                ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0,
+                gp_pdm1, gp_pdm2, gps_tx, jitter_bist, ldo_en, ldo_update,
+                m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mss_lte, nav_pps_in, nav_pps_out, pa_indicator,
+                pci_e, phase_flag, pll_bist, pll_bypassnl, pll_reset, pri_mi2s,
+                pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+                qlink_request, qua_mi2s, qup00, qup01, qup02, qup03, qup04,
+                qup10, qup11, qup12, qup13, qup14, qup15, sd_write, sdc40,
+                sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, ter_mi2s,
+                tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsif1_clk, tsif1_data,
+                tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, tsif2_data,
+                tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, uim_batt, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
+                wsa_data ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3500000 {
+        compatible = "qcom,sm7150-tlmm";
+        reg = <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        wakeup-parent = <&pdc>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio44";
+                function = "qup12";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio45";
+                function = "qup12";
+                bias-disable;
+            };
+        };
+    };
+...