diff mbox series

[11/11] arm64: dts: qcom: msm8996-oneplus: do not enable incomplete nodes

Message ID 20230305125954.209559-11-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [01/11] arm64: dts: qcom: drop incorrect cell-index from SPMI | expand

Commit Message

Krzysztof Kozlowski March 5, 2023, 12:59 p.m. UTC 
status=okay should appear in final place where all required properties
are provided, because that makes the code the easiest to read.  Move the
status from common OnePlus DTSI to board DTS.  No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../boot/dts/qcom/msm8996-oneplus-common.dtsi   | 17 -----------------
 arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts   |  6 ++++++
 arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts  |  6 ++++++
 3 files changed, 12 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 104deaee74e5..2adadc1e5b7c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -85,10 +85,6 @@  wlan_en: wlan-en-regulator {
 	};
 };
 
-&adsp_pil {
-	status = "okay";
-};
-
 &blsp1_i2c3 {
 	status = "okay";
 
@@ -183,10 +179,6 @@  &dsi0_phy {
 	status = "okay";
 };
 
-&gpu {
-	status = "okay";
-};
-
 &hsusb_phy1 {
 	vdd-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
@@ -215,7 +207,6 @@  &mmcc {
 
 &mss_pil {
 	pll-supply = <&vreg_l12a_1p8>;
-	status = "okay";
 };
 
 &pcie0 {
@@ -548,10 +539,6 @@  wcd9335: codec@1,0 {
 	};
 };
 
-&slpi_pil {
-	status = "okay";
-};
-
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "OnePlus3";
@@ -812,7 +799,3 @@  &usb3_dwc3 {
 
 	maximum-speed = "high-speed";
 };
-
-&venus {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
index 1bdc1b134305..dfe75119b8d2 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -17,6 +17,7 @@  / {
 
 &adsp_pil {
 	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+	status = "okay";
 };
 
 &battery {
@@ -25,6 +26,8 @@  &battery {
 };
 
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
 	};
@@ -33,12 +36,15 @@  zap-shader {
 &mss_pil {
 	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
 			"qcom/msm8996/oneplus3/modem.mbn";
+	status = "okay";
 };
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	status = "okay";
 };
 
 &venus {
 	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
index 34f837dd0c12..51fce65e89f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -18,6 +18,7 @@  / {
 
 &adsp_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+	status = "okay";
 };
 
 &battery {
@@ -26,6 +27,8 @@  &battery {
 };
 
 &gpu {
+	status = "okay";
+
 	zap-shader {
 		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
 	};
@@ -34,12 +37,15 @@  zap-shader {
 &mss_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
 			"qcom/msm8996/oneplus3t/modem.mbn";
+	status = "okay";
 };
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	status = "okay";
 };
 
 &venus {
 	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+	status = "okay";
 };