@@ -922,64 +922,72 @@ static void ipa_endpoint_init_mode(struct ipa_endpoint *endpoint)
iowrite32(val, ipa->reg_virt + offset);
}
-/* For IPA v4.5+, times are expressed using Qtime. The AP uses one of two
- * pulse generators (0 and 1) to measure elapsed time. In ipa_qtime_config()
- * they're configured to have granularity 100 usec and 1 msec, respectively.
- *
- * The return value is the positive or negative Qtime value to use to
- * express the (microsecond) time provided. A positive return value
- * means pulse generator 0 can be used; otherwise use pulse generator 1.
+/* For IPA v4.5+, times are expressed using Qtime. A time is represented
+ * at one of several available granularities, which are configured in
+ * ipa_qtime_config(). Three (or, starting with IPA v5.0, four) pulse
+ * generators are set up with different "tick" periods. A Qtime value
+ * encodes a tick count along with an indication of a pulse generator
+ * (which has a fixed tick period). Two pulse generators are always
+ * available to the AP; a third is available starting with IPA v5.0.
+ * This function determines which pulse generator most accurately
+ * represents the time period provided, and returns the tick count to
+ * use to represent that time.
*/
-static int ipa_qtime_val(u32 microseconds, u32 max)
+static u32
+ipa_qtime_val(struct ipa *ipa, u32 microseconds, u32 max, u32 *select)
{
- u32 val;
+ u32 which = 0;
+ u32 ticks;
- /* Use 100 microsecond granularity if possible */
- val = DIV_ROUND_CLOSEST(microseconds, 100);
- if (val <= max)
- return (int)val;
+ /* Pulse generator 0 has 100 microsecond granularity */
+ ticks = DIV_ROUND_CLOSEST(microseconds, 100);
+ if (ticks <= max)
+ goto out;
- /* Have to use pulse generator 1 (millisecond granularity) */
- val = DIV_ROUND_CLOSEST(microseconds, 1000);
- WARN_ON(val > max);
+ /* Pulse generator 1 has millisecond granularity */
+ which = 1;
+ ticks = DIV_ROUND_CLOSEST(microseconds, 1000);
+ if (ticks <= max)
+ goto out;
- return (int)-val;
+ if (ipa->version >= IPA_VERSION_5_0) {
+ /* Pulse generator 2 has 10 millisecond granularity */
+ which = 2;
+ ticks = DIV_ROUND_CLOSEST(microseconds, 100);
+ }
+ WARN_ON(ticks > max);
+out:
+ *select = which;
+
+ return ticks;
}
/* Encode the aggregation timer limit (microseconds) based on IPA version */
static u32 aggr_time_limit_encode(struct ipa *ipa, const struct ipa_reg *reg,
u32 microseconds)
{
+ u32 ticks;
u32 max;
- u32 val;
if (!microseconds)
return 0; /* Nothing to compute if time limit is 0 */
max = ipa_reg_field_max(reg, TIME_LIMIT);
if (ipa->version >= IPA_VERSION_4_5) {
- u32 gran_sel;
- int ret;
+ u32 select;
- /* Compute the Qtime limit value to use */
- ret = ipa_qtime_val(microseconds, max);
- if (ret < 0) {
- val = -ret;
- gran_sel = ipa_reg_encode(reg, AGGR_GRAN_SEL, 1);
- } else {
- val = ret;
- gran_sel = 0;
- }
+ ticks = ipa_qtime_val(ipa, microseconds, max, &select);
- return gran_sel | ipa_reg_encode(reg, TIME_LIMIT, val);
+ return ipa_reg_encode(reg, AGGR_GRAN_SEL, select) |
+ ipa_reg_encode(reg, TIME_LIMIT, ticks);
}
/* We program aggregation granularity in ipa_hardware_config() */
- val = DIV_ROUND_CLOSEST(microseconds, IPA_AGGR_GRANULARITY);
- WARN(val > max, "aggr_time_limit too large (%u > %u usec)\n",
+ ticks = DIV_ROUND_CLOSEST(microseconds, IPA_AGGR_GRANULARITY);
+ WARN(ticks > max, "aggr_time_limit too large (%u > %u usec)\n",
microseconds, max * IPA_AGGR_GRANULARITY);
- return ipa_reg_encode(reg, TIME_LIMIT, val);
+ return ipa_reg_encode(reg, TIME_LIMIT, ticks);
}
static void ipa_endpoint_init_aggr(struct ipa_endpoint *endpoint)
@@ -1050,20 +1058,13 @@ static u32 hol_block_timer_encode(struct ipa *ipa, const struct ipa_reg *reg,
if (ipa->version >= IPA_VERSION_4_5) {
u32 max = ipa_reg_field_max(reg, TIMER_LIMIT);
- u32 gran_sel;
- int ret;
+ u32 select;
+ u32 ticks;
- /* Compute the Qtime limit value to use */
- ret = ipa_qtime_val(microseconds, max);
- if (ret < 0) {
- val = -ret;
- gran_sel = ipa_reg_encode(reg, TIMER_GRAN_SEL, 1);
- } else {
- val = ret;
- gran_sel = 0;
- }
+ ticks = ipa_qtime_val(ipa, microseconds, max, &select);
- return gran_sel | ipa_reg_encode(reg, TIMER_LIMIT, val);
+ return ipa_reg_encode(reg, TIMER_GRAN_SEL, 1) |
+ ipa_reg_encode(reg, TIMER_LIMIT, ticks);
}
/* Use 64 bit arithmetic to avoid overflow */
@@ -390,7 +390,12 @@ static void ipa_qtime_config(struct ipa *ipa)
reg = ipa_reg(ipa, TIMERS_PULSE_GRAN_CFG);
val = ipa_reg_encode(reg, PULSE_GRAN_0, IPA_GRAN_100_US);
val |= ipa_reg_encode(reg, PULSE_GRAN_1, IPA_GRAN_1_MS);
- val |= ipa_reg_encode(reg, PULSE_GRAN_2, IPA_GRAN_1_MS);
+ if (ipa->version >= IPA_VERSION_5_0) {
+ val |= ipa_reg_encode(reg, PULSE_GRAN_2, IPA_GRAN_10_MS);
+ val |= ipa_reg_encode(reg, PULSE_GRAN_3, IPA_GRAN_10_MS);
+ } else {
+ val |= ipa_reg_encode(reg, PULSE_GRAN_2, IPA_GRAN_1_MS);
+ }
iowrite32(val, ipa->reg_virt + ipa_reg_offset(reg));
The AP has third pulse generator available starting with IPA v5.0. Redefine ipa_qtime_val() to support that possibility. Pass the IPA pointer as an argument so the version can be determined. And stop using the sign of the returned tick count to indicate which of two pulse generators to use. Instead, have the caller provide the address of a variable that will hold the selected pulse generator for the Qtime value. And for version 5.0, check whether the third pulse generator best represents the time period. Add code in ipa_qtime_config() to configure the fourth pulse generator for IPA v5.0+; in that case configure both the third and fourth pulse generators to use 10 msec granularity. Consistently use "ticks" for local variables that represent a tick count. Signed-off-by: Alex Elder <elder@linaro.org> --- drivers/net/ipa/ipa_endpoint.c | 91 +++++++++++++++++----------------- drivers/net/ipa/ipa_main.c | 7 ++- 2 files changed, 52 insertions(+), 46 deletions(-)