diff mbox series

[v3,6/8] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets

Message ID 20230118005328.2378792-7-abel.vesa@linaro.org
State Superseded
Headers show
Series phy: qualcomm: Add PCIe support for SM8550 | expand

Commit Message

Abel Vesa Jan. 18, 2023, 12:53 a.m. UTC 
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy-qcom-qmp-qserdes-txrx-v6_20.h         | 45 +++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
 2 files changed, 46 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

Comments

Dmitry Baryshkov Jan. 18, 2023, 4:30 a.m. UTC | #1 
On 18/01/2023 02:53, Abel Vesa wrote:
> The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
> PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
> dedicated header file.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>   .../phy-qcom-qmp-qserdes-txrx-v6_20.h         | 45 +++++++++++++++++++
>   drivers/phy/qualcomm/phy-qcom-qmp.h           |  1 +
>   2 files changed, 46 insertions(+)
>   create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX		0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX		0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN			0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1				0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2				0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3				0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2			0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3			0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS			0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3		0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2				0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET			0xa0
+#define QSERDES_V6_20_RX_DFE_3					0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL			0xe8
+#define QSERDES_V6_20_RX_GM_CAL					0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4			0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES				0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL				0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET		0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32		0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0				0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1				0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2				0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3				0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4				0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5				0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6				0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0				0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1				0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2				0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3				0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4				0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5				0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6				0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@ 
 
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"