| Message ID | 20221230135044.287874-1-konrad.dybcio@linaro.org |
|---|---|
| State | Accepted |
| Commit | d8b4ee9379e4b6df44bbaf6020461514b401b8f6 |
| Headers | show |
| Series | [1/3] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits | expand |
On 30.12.2022 17:08, Krzysztof Kozlowski wrote: > On 30/12/2022 14:50, Konrad Dybcio wrote: >> - Expand long clock-names into vertical lists >> - Shuffle properties around: >> - Make sure compatible goes first and status goes last >> - Make property order consistent between similar nodes >> - Fix up indentation >> - Remove stray newlines >> - Remove a redundant comment about swr2 being associated with TX macro >> (it's obvious by looking at the label property 10 lines below) >> - Change unnecessary interrupts-extended to interrupts >> - Disable SWR0 and WSA macro by default and enable them on SM8250 MTP and >> RB5, which were the only users >> - Remove stray #address/size-cells from txmacro, as it's not even >> supposed to have children > > You duplicate here some work: > https://lore.kernel.org/all/20221225115844.55126-4-krzysztof.kozlowski@linaro.org/ > > and maybe: > https://lore.kernel.org/all/167233461775.1099840.3444272939352778399.b4-ty@kernel.org/ > > If you wish to avoid trivial cleanup conflicts, feel free to poke to my > pending branch: > https://github.com/krzk/linux/commits/pending/dt-bindings-qcom-new-and-fixes-for-warnings-linux-next > > Also, this is a mixture of non-functional changes (re-ordering, > whitespace) with something close to functional (interrupts-extended -> > interrupts, disabling nodes in DTSI). These should be split. Thanks for pointing this out, I'll resubmit these soon! Konrad > > > > Best regards, > Krzysztof >
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index a3aa85a32bf8..3b3ea380c6e6 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2284,7 +2284,7 @@ rxmacro: rxmacro@3200000 { pinctrl-names = "default"; pinctrl-0 = <&rx_swr_active>; compatible = "qcom,sm8250-lpass-rx-macro"; - reg = <0 0x3200000 0 0x1000>; + reg = <0 0x03200000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2302,7 +2302,7 @@ rxmacro: rxmacro@3200000 { }; swr1: soundwire-controller@3210000 { - reg = <0 0x3210000 0 0x2000>; + reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -2331,7 +2331,7 @@ txmacro: txmacro@3220000 { pinctrl-names = "default"; pinctrl-0 = <&tx_swr_active>; compatible = "qcom,sm8250-lpass-tx-macro"; - reg = <0 0x3220000 0 0x1000>; + reg = <0 0x03220000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2352,7 +2352,7 @@ txmacro: txmacro@3220000 { /* tx macro */ swr2: soundwire-controller@3230000 { - reg = <0 0x3230000 0 0x2000>; + reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core";
Some addresses were 7-hex-digits long. Fix that. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)