@@ -62,14 +62,14 @@ led@0 {
reg = <0>;
chan-name = "button-backlight";
led-cur = /bits/ 8 <0x32>;
- max-cur = /bits/ 8 <0xC8>;
+ max-cur = /bits/ 8 <0xc8>;
};
led@1 {
reg = <0>;
chan-name = "button-backlight1";
led-cur = /bits/ 8 <0x32>;
- max-cur = /bits/ 8 <0xC8>;
+ max-cur = /bits/ 8 <0xc8>;
};
};
};
@@ -1265,23 +1265,23 @@ opp-560000000 {
};
opp-510000000 {
opp-hz = /bits/ 64 <510000000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-401800000 {
opp-hz = /bits/ 64 <401800000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-315000000 {
opp-hz = /bits/ 64 <315000000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-214000000 {
opp-hz = /bits/ 64 <214000000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-133000000 {
opp-hz = /bits/ 64 <133000000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
};
@@ -3386,7 +3386,7 @@ slimbam: dma-controller@9184000 {
slim_msm: slim-ngd@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
- reg = <0x091c0000 0x2C000>;
+ reg = <0x091c0000 0x2c000>;
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>;
dma-names = "rx", "tx";
Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 4 ++-- arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-)