@@ -7,40 +7,17 @@
#include "dpu_hw_top.h"
#include "dpu_kms.h"
-#define SSPP_SPARE 0x28
-
#define FLD_SPLIT_DISPLAY_CMD BIT(1)
#define FLD_SMART_PANEL_FREE_RUN BIT(2)
#define FLD_INTF_1_SW_TRG_MUX BIT(4)
#define FLD_INTF_2_SW_TRG_MUX BIT(8)
#define FLD_TE_LINE_INTER_WATERLEVEL_MASK 0xFFFF
-#define DANGER_STATUS 0x360
-#define SAFE_STATUS 0x364
-
-#define TE_LINE_INTERVAL 0x3F4
-
#define TRAFFIC_SHAPER_EN BIT(31)
#define TRAFFIC_SHAPER_RD_CLIENT(num) (0x030 + (num * 4))
#define TRAFFIC_SHAPER_WR_CLIENT(num) (0x060 + (num * 4))
#define TRAFFIC_SHAPER_FIXPOINT_FACTOR 4
-#define MDP_WD_TIMER_0_CTL 0x380
-#define MDP_WD_TIMER_0_CTL2 0x384
-#define MDP_WD_TIMER_0_LOAD_VALUE 0x388
-#define MDP_WD_TIMER_1_CTL 0x390
-#define MDP_WD_TIMER_1_CTL2 0x394
-#define MDP_WD_TIMER_1_LOAD_VALUE 0x398
-#define MDP_WD_TIMER_2_CTL 0x420
-#define MDP_WD_TIMER_2_CTL2 0x424
-#define MDP_WD_TIMER_2_LOAD_VALUE 0x428
-#define MDP_WD_TIMER_3_CTL 0x430
-#define MDP_WD_TIMER_3_CTL2 0x434
-#define MDP_WD_TIMER_3_LOAD_VALUE 0x438
-#define MDP_WD_TIMER_4_CTL 0x440
-#define MDP_WD_TIMER_4_CTL2 0x444
-#define MDP_WD_TIMER_4_LOAD_VALUE 0x448
-
#define MDP_TICK_COUNT 16
#define XO_CLK_RATE 19200
#define MS_TICKS_IN_SEC 1000
@@ -48,8 +25,6 @@
#define CALCULATE_WD_LOAD_VALUE(fps) \
((uint32_t)((MS_TICKS_IN_SEC * XO_CLK_RATE)/(MDP_TICK_COUNT * fps)))
-#define DCE_SEL 0x450
-
static void dpu_hw_setup_split_pipe(struct dpu_hw_mdp *mdp,
struct split_pipe_cfg *cfg)
{
@@ -16,6 +16,7 @@
#define INTR_CLEAR 0x018
#define INTR2_EN 0x008
#define INTR2_STATUS 0x00c
+#define SSPP_SPARE 0x028
#define INTR2_CLEAR 0x02c
#define HIST_INTR_EN 0x01c
#define HIST_INTR_STATUS 0x020
@@ -28,7 +29,15 @@
#define DSPP_IGC_COLOR0_RAM_LUTN 0x300
#define DSPP_IGC_COLOR1_RAM_LUTN 0x304
#define DSPP_IGC_COLOR2_RAM_LUTN 0x308
+#define DANGER_STATUS 0x360
+#define SAFE_STATUS 0x364
#define HW_EVENTS_CTL 0x37C
+#define MDP_WD_TIMER_0_CTL 0x380
+#define MDP_WD_TIMER_0_CTL2 0x384
+#define MDP_WD_TIMER_0_LOAD_VALUE 0x388
+#define MDP_WD_TIMER_1_CTL 0x390
+#define MDP_WD_TIMER_1_CTL2 0x394
+#define MDP_WD_TIMER_1_LOAD_VALUE 0x398
#define CLK_CTRL3 0x3A8
#define CLK_STATUS3 0x3AC
#define CLK_CTRL4 0x3B0
@@ -43,6 +52,15 @@
#define HDMI_DP_CORE_SELECT 0x408
#define MDP_OUT_CTL_0 0x410
#define MDP_VSYNC_SEL 0x414
+#define MDP_WD_TIMER_2_CTL 0x420
+#define MDP_WD_TIMER_2_CTL2 0x424
+#define MDP_WD_TIMER_2_LOAD_VALUE 0x428
+#define MDP_WD_TIMER_3_CTL 0x430
+#define MDP_WD_TIMER_3_CTL2 0x434
+#define MDP_WD_TIMER_3_LOAD_VALUE 0x438
+#define MDP_WD_TIMER_4_CTL 0x440
+#define MDP_WD_TIMER_4_CTL2 0x444
+#define MDP_WD_TIMER_4_LOAD_VALUE 0x448
#define DCE_SEL 0x450
#endif /*_DPU_HWIO_H */
There is a separate header containing some of MDP TOP register definitions, dpu_hwio.h. Move missing register definitions from dpu_hw_top.c to the mentioned header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 25 ---------------------- drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h | 18 ++++++++++++++++ 2 files changed, 18 insertions(+), 25 deletions(-)